Doc: ELE16PH33A
Page 1
Solar Solve Marine
Installation Instructions
Installation InstructionsInstallation Instructions
Installation Instructions
for
forfor
for
CASSETTE and
CASSETTE andCASSETTE and
CASSETTE and
NON
NONNON
NON-
--
-CAS
CASCAS
CASS
SS
SETTE
ETTEETTE
ETTE
ELECTRIC SCREENS and BLINDS
ELECTRIC SCREENS and BLINDSELECTRIC SCREENS and BLINDS
ELECTRIC SCREENS and BLINDS
SOLASAFE
SOLASAFESOLASAFE
SOLASAFE
®
®®
®
CASSLITE
CASSLITECASSLITE
CASSLITE
®
®®
®
SOLAROLA
SOLAROLASOLAROLA
SOLAROLA
®
®®
®
DIMMLITE
DIMMLITEDIMMLITE
DIMMLITE
®
®®
®
We reserve the right to make any modifications necessary to ensure products comply with customer requirements.
The drawings in these documents are for illustrative purposes and NOT TO SCA E.
Under normal circumstances dusting with a NON-ABRASIVE dry duster is all that is required. Finger
prints, grease and most stubborn marks on film, blackout, lyverscreen and fibreglass fabrics can be
carefully removed with white spirit and a soft cloth, followed by a further wiping over with a soft non-
abrasive cloth dipped in clean soapy water.
If any type of film or fabric becomes very dirty it can be
carefully wiped over with a soft non-abrasive cloth and clean water with a little soap or detergent. This
will do no harm as long as the film / fabric is allowed to dry completely before being rolled up. Excess
water should be removed as it will leave a water mark when dry.
LEASE NOTE:
IF WINDOWS ARE SLO ING IT
WILL BE NECESSARY TO USE THE
CABLE SU ORT SYSTEM
IM ORTANT NOTE FOR INSTALLER:
LEASE LEAVE THIS INSTRUCTION
SHEET WITH THE ROLLER SCREEN /
BLIND FOR CUSTOMERS REFERENCE
ONLY A FULLY QUALIFIED ELECTRICIAN SHOULD INSTALL MOTORISED
SCREENS / BLINDS FOR HEALTH & SAFETY REASONS AND TO
