Socket CHS Series 7 Manual de usuario

Quick Start Guide

Cordless Hand Scanner Series 7

with Bluetooth®Wireless Technology

Instructions for Intermec CK30/CK31

Package Contents

•Socket Cordless Hand Scanner

•AC charging adapter with international plugs

•2 NiMH rechargeable AAA batteries

•Lanyard with retractable tether

(not available in Europe/Middle East/Africa region)

•Software installation CD

Also pictured: Charging cradle (available

separately).

Product Registration

We highly recommend that all customers register their Socket products. Registered

users receive the following benefits:

•Priority for technical support

•Special offers for future products and upgrades

•The latest new product information

www.socketmobile.com/support/support/new

Additional Documentation

This Quick Start Guide contains only the most basic setup instructions for the Socket

Cordless Hand Scanner for Windows Mobile-based devices. For more complete

information, please refer to the User’s Guide, available in the Docs folder of the

installation CD and online at:

www.socketmobile.com/support/downloads/data-collection/series7/?page=Detail.

An Advanced Programming Guide and separate Quick Start Guides are available for

Windows XP/XP Tablet Edition, Palm, RIM BlackBerry, Intermec CK30/31 and

Symbian.

In the Socket software, the abbreviation “CS” refers to both the Socket Cordless

Hand Scanner and Socket Cordless Ring Scanner.

Technical Support

If you have trouble installing or using the CHS, contact Socket technical support by

first registering your product at www.socketmobile.com/support/support/new. After

product registration, log in, click on the Technical Support tab, and click Create New

Ticket to submit an online request for technical support.

HARDWARE PREPARATION

Installing Batteries and Attaching the Tether

1. Use a coin or screwdriver to unlock and remove the battery cover. Turn the lock

underneath the scanner to a horizontal position. Remove the casing.

2. Install the batteries in opposite directions, as indicated by the positive symbols.

WARNING: Do not install the batteries incorrectly. Damage may result.

3. If desired, attach the tether. Wrap the loop of

string around the inside part of the lock.

4. Replace the battery cover and lock it into place.

5. If desired, attach the tether to a lanyard or belt.

Charging the Scanner

Use the included AC adapter to charge the Cordless Hand Scanner. Alternatively,

you can use the charging cradle (available separately). The included NiMH batteries

must be charged for at least 4 hours before initial use.

The Battery Status LED will emit a solid red light while charging, and turn off when

the batteries are fully charged (see back cover for more information about the LED).

A fully charged scanner should provide roughly 8 hours of normal operation.

WARNING: Charge only NiMH batteries in the CHS. Damage may occur if

alkaline or other types of batteries are charged. Do not store the CHS for more

than 30 days with the batteries installed.

Besides the included AC Adapter, you can charge the CHS using AC and DC

adapters of the most recent Pocket PCs from Socket, Casio, Dell, Fujitsu, HP and

Toshiba.

The adapter rating is 5V, 2A, positive pole center.

The red Battery Status LED will not function properly if standard AAA alkaline

batteries are being used.

About the Touch Screen Stylus

The CHS features a stylus tip in the tail of the

scanner that you can use on Pocket PC and other

device touch screens. The stylus can be removed

with small pliers if desired. Visit the Socket

website to purchase replacement styli.

WARNING: Do not use the stylus if damaged. A

damaged stylus may scratch the display screen

of your device.

The stylus does not work with XP Tablet computers using Active Matrix displays.

SETUP INSTRUCTIONS

Before you begin the instructions below, make sure you have installed the batteries

and charged the scanner.

The following instructions are based on the Intermec CK30. Instructions for the

CK31 should be very similar.

STEP 1: Install the Software

IMPORTANT! You must install both SocketScan and Connect!Agent.

1. Use ActiveSync (4.0 or greater), the Windows Mobile Device Center (for Windows

Vista) or another method to copy the CEConnect!Agent.160s.ARM… and

SocketScan.160s.ARM… CAB files from the 160s folder in the installation CD and

paste them into the CK30. Refer to your CK30 manual for instructions.

Remember where you save the CAB files in the CK30. For example, you may

want to save the files in the My Documents folder.

2. After copying the CAB files into the CK30, push the green button then the

orange button on the CK30 to access the System Main Menu.

3. In the System Main Menu, press 2 File Manager.

4. Navigate to the location where you saved the CAB files.

5. Select the CE.Connect!Agent.160s.ARM… CAB file and press the Enter button on

the right side.

6. In the options window, select Run and press the Enter button on the right side.

7. Follow the instructions on your screen to install Connect!Agent.

8. After you finish Connect!Agent installation, navigate to where you saved the

CE.SocketScan.160s.ARM… CAB file and run it.

STEP 2: Turn on the CHS

Turn on the Cordless Hand Scanner. Press the small power

button for five seconds, until you see the LED turn blue.

The LED should blink blue once per second to show that the

Bluetooth radio is on but not connected. If the LED begins

blinking red, the battery needs to be charged.

STEP 3: Connect CHS to the CK30 with Bluetooth

1. On the CK30, press the green button and then the orange button to access the

System Main Menu.

2. In the System Main Menu, press 7 SocketScan.

3. In the SocketScan menu, press 1 Connect Cordless Scanner.

4. Connect!Agent will automatically turn on the Bluetooth radio and begin to search

for and connect to the CHS.

-If this is your first time connecting to a CHS or CRS (Cordless Ring

Scanner) from this CK30, Connect!Agent will begin searching for any CHS

or CRS in range.

-If you have previously connected to a CHS or CRS, Connect!Agent will

automatically begin searching for the last one you connected to.

5. If Connect!Agent does not have a favorite scanner and finds multiple CHS and/or

CRS devices in range, select the one you want to connect to and press the Enter

button on the right side.

To help you identify the scanner, Connect!Agent reports the scanner’s

Bluetooth MAC address. The characters in brackets are the last six characters

of the address.

6. Connect!Agent will begin connecting to the CHS.

7. After your mobile device connects to the CHS, the scanner will beep once, and

the bottom of the SocketScan menu will report, “CHS connected.”

8. In the SocketScan menu, press 6 Hide SocketScan.

IMPORTANT!

Do not press the Esc button, or you will close SocketScan and won’t be able

to scan bar codes into the CK30.

STEP 4: Scan Data into Your Application

1. Start the Windows application that you want to receive the data (e.g., Word

Pad). Make sure a document is open.

2. Place the cursor where you want data from the next scan to go.

3. Press the trigger button and scan the code.

When data is read and sent to the CK30, the scanner beam will turn off.

Depending on your scanner settings, the scanner may beep and/or the Hand

scanner’s LED may flash green to indicate a good read.

If no data is read in a few seconds, the scanner beam will turn off, and you must

try again.

4. After a successful scan, data should appear in your document. For example, after

you scan a bar code into a spreadsheet, data should appear in the first cell. The

default “CR” (carriage return) suffix will advance the cursor to the next cell,

ready for the next scan.

Wait for the “Good Scan” indication before you scan another bar code. If you try

to scan too fast, the device can lock up until you stop scanning.

SocketScan Auto-Reconnect

If your CK30 suspends or the CHS moves out of range, the connection will end.

After the mobile device turns on again or returns in range, SocketScan will try to

re-connect for approximately 3 minutes. If, after 3 minutes, they have not re-

connected, you will need to manually re-connect them.

DISCONNECTING

In the SocketScan menu, press 2 Disconnect Cordless Scanner.

Turning off the CHS

To turn off the CHS, press the power button at least 2 seconds, until the LED stops

blinking.

SCANNING TIPS

Practice to determine the best scanning angle and distance for your type of bar code.

Scan Angle

For best results, position the scanner at an angle to the bar code, at least 15° from

perpendicular. Otherwise, light can bounce back into the scanner and “blind” the

sensing mechanism.

Aiming Beam

Aim the scanner so that the red beam covers the entire width of the bar code.

HARDWARE AND SOFTWARE INDICATORS

Status Indicator LED

LED LED Activity Meaning

1 blink per

second Bluetooth radio is on, but not connected

Bluetooth

Status (blue) 1 blink per 5

seconds Bluetooth radio is on, connection established

Good Read

(green) Green Data successfully scanned and transmitted to host

device

1 blink per

second Less than 20% of battery life remaining

Solid red Batteries are charging

Battery Status

(red) Off when

connected to

charger Batteries are fully charged

Status Indicator Beeps

The scanner beeps to signal the Bluetooth connection status. You can also have the

scanner beep to indicate scanned data reaching the host device.

Beep Beep Activity Meaning

1 beep Connection to host device has begun

Bluetooth

Status (blue) 2 beeps Connection to host device has ended

Good Read

(green) 1 beep Data successfully scanned and transmitted to host

device

7/2008 Printed in U.S.A.

SocketScan, and Connect!Agent are registered trademarks or trademarks of Socket Mobile, Inc. The

Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by

Socket Mobile, Inc. is under license. All other trademarks and trade names contained herein are those of

their respective owners

Otros manuales para CHS Series 7

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escáner de Socket

Socket

Socket 7X Manual de usuario

Socket

Socket CHS 7Ci Manual de usuario

Socket

Socket Secure Digital Scan Card Series 3 Manual de usuario

Socket

Socket CHS Series 7 Manual de usuario

Socket

Socket Cordless Hand Scanner Manual de usuario

Socket

Socket Cordless Ring Scanner Series 9 Manual de usuario

Socket

Socket Cordless Ring Scanner Series 9 Manual de usuario

Socket

Socket CHS 7DiRx Manual de usuario

Socket

Socket DURASCAN 800 Series Manual de usuario

Socket

Socket Bluetooth iPAQ Manual de usuario

Socket

Socket 7X Manual de usuario

Socket

Socket 7X Manual de usuario

Socket

Socket CHS Series 7 Manual de usuario

Socket

Socket CRS Series 9 Manual de usuario

Socket

Socket CF RFID Reader-Scan Card Series 6 Manual de usuario

Socket

Socket CompactFlash Scan Card Series 5 Manual de usuario

Socket

Socket 7X Manual de usuario

Socket

Socket DURASCAN D800 Series Manual de usuario

Socket

Socket CHS 7XiRx Manual de usuario

Socket

Socket CHS 8Ci Manual de usuario

Socket

Socket CHS 7Xi Manual de usuario

Socket

Socket CHS 7DiRx Manual de instalación

Socket

Socket 1D Manual de usuario

Socket

Socket CompactFlash Scan Card Series 5 Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario