ST-32O Mode Setting
I.SPECIAL FEATURES:
l. Oneset stand alone design.
2.After installation of Proximity readerand is connected to power
source, red power indicator on the front panelwill light up.
3.4 typ€ of door opening modes:
(1) Enter4digit door opening password, identification code is l'
(2)Proximity card door access, identification code is 2.
(3) Proximity card plus 4-digit door opening password ( 8
sets of 4{igit door opening passwords), identification code is 3'
(4)Proximity card or 4digit door oPening Password,
identification code is 4.
4.\whenentering into the system setting mode' 4-digit system
passwotd should be entered in order to enter into system setting
modes.
System code is being set at 45€Zon production' Inorder to enter
into the system lo set up mode, press jlE fiFt then enterigggwg4l
and presslEagainwhen completed.(Example: +# 4 5 6 7 # ).
5.All proximity card or proximity key tag must be registercd before
use.
6. Prcximity card or proximity keytag has Sdigit number Gode'
The
card number rcquired for setting is the last 6 digits.
7. 8 sets of door opening passwords.
8.Maximum storage capacity of 2,000
cards.
9, Datamemory feature in case of power fuilure'
II. FRONT PANEL AND TYPES OF PROXIMITY CARD:
FRONT PANEL
1.Indicator
lights:
(1)
KEY
light(green)
(2)
Status
light(green)
2.Barindi€tor light:
: Greenflashing
lightonwhen
buttons pressed.
: Green
light
onwhen
entering.
(1)
OKlight(gen barindi€tor light):
Dooropenindicator
light.
(2) Porer light (Ed bar indiEtor light): Systemstandby.
3.Ten enter keys,two functional keys: "#", " * ".
# key; confimation key.
