SMK-Link Bluetooth Calculator Keypad Manual de usuario
Page 1
User’s Manual
Bluetooth Calculator Keypad
Page 2
Regulatory Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
FCC Certication
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Page 3
Consult the dealer or an experienced radio/TV
technician for help.
Notice: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Extension cables are not recommended, if used, they
must be shielded in order to comply with the emission
limits.
IC Certication
The term “IC” before the certication/registration
number only signies that the Industry Canada technical
specications were met.
Declaration of conformity
Hereby, SMK-Link Electronics Corporation declares
that this product is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
© 2008 SMK-LINK Electronics, Inc.
•
Page 4
System Requirements
Hardware: Bluetooth-enabled computer (with either
built-in Bluetooth capability or external Bluetooth
dongle)
Operating System: Windows 2000, XP or Vista,
Mac OS X v10.4.6 or later
Exception: Please note that this keypad supports OS
using English alphabets on most keyboards with the
exception of French keyboard layout.
Package Contents
Bluetooth calculator keypad
2 x AAA batteries
User’s manual
Installing Batteries (Supplied)
Remove the battery cover from the bottom of the
keypad by releasing the latch and slide off the
cover. To release the latch , push it toward the top
of the keypad and gently lift the cover up and pull it
away from the cover lock .
Insert the two supplied AAA batteries (included
in the package) to the battery slots. Make sure the
positive (+) and negative (-) ends of the batteries
match the polarity markings inside the battery
compartment.
•
•
•
•
•
•
•
•
Page 5
Snap the battery cover back into position.
Before connecting the keypad with your Bluetooth
computer you must turn the keypad power on by
sliding the on/off switch located at the bottom of the
keypad to the ON position.
•
•
•
Do not mix new and used batteries in
the keypad. Always replace with 2
batteries of the same type from the same
manufacturer.
On/Off
Connect
Page 6
Connecting with Your Bluetooth Computer
Before you can use Bluetooth devices for the rst time
you must connect your devices through a standard
discovery and pairing process.
The Interlink Bluetooth Calculator Keypad is designed to
work with Bluetooth-enabled systems. Please review the
documentations that come with your computer system
for any specics regarding your Bluetooth system and/or
consult with your system vendor if you cannot nd the
Bluetooth connectivity in your system.
Important: During the process of connecting your
Bluetooth keypad to your Bluetooth computer, you
must set the keypad at Keypad Mode by tapping on the
MODE key until the word Keypad appears on the LCD
display.
Note: The keypad is default to Keypad Mode when you
turn the power on. If you have switched the mode to
Calculator Mode you must perform the mode switch
function to bring it back to Keypad Mode before
connecting to your Bluetooth computer.
Widcomm Bluetooth Software
Make sure your computer’s Bluetooth radio is
turned on.
Make sure your keypad is on Keypad Mode.
1.
2.
Page 7
Right click the Bluetooth icon located on your
Desktop or the System Tray, select Add a
Bluetooth Device.
At this point, the keypad must be placed in
discovery mode. First make sure the keypad is
turned on (check the on/off switch located at the
bottom of the keypad) then press the Connect
button also located at the bottom of the keypad.
The LED light on the top of the keypad will ash,
indicating the keypad is in discovery mode ready to
be connected to the computer.
Check My device is set up and ready to be found
and click Next. This must be performed within 20
3.
4.
5.
Connect
On/Off
LED
Page 8
seconds to avoid expiration of the discovery signal.
The Interlink Bluetooth Calculator Keypad will
be discovered and listed on the screen. Highlight
the name of the device and click Next.
The Bluetooth Wizard will ask you for a passkey.
Select Choose a passkey for me and click Next.
6.
7.
Page 9
The Wizard will provide you with a passkey.
Use your Bluetooth keypad to enter the numbers
displayed on the screen, followed by pressing the
“enter” key on your keypad. Note: please do not
use your keyboard to enter the passkey although the
Wizard calls the keypad a keyboard. You must type
the numbers using the Bluetooth keypad you are
connecting with. When this is done, click Next.
8.
Page 10
Click Finish on the Wizard to complete the process.
The Found New Hardware Wizard appears and the
OS will install the driver automatically. No other
steps are necessary.
The Bluetooth icon will turn to green. Your
Bluetooth Calculator Keypad is ready to use.
Macintosh Bluetooth Software
Make sure your computer’s Bluetooth radio is
turned on.
Make sure your keypad is on Keypad Mode.
Click the Bluetooth icon located on your desktop or
in the system bar.
9.
10.
11.
1.
2.
3.
Tabla de contenidos
Otros manuales de Teclado de SMK-Link
