SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
VERSION 10/2016
MV1000S
Dust collector
5
DUST BAG REPLACEMENT
Once the dust bag has collected around 44 lb.
(20 kg) of material, replace the bag to avoid lift-
inghazardscausedbyoverlling
Followthestepsbelowforreplacement:
• SwitchthemachinetotheONposition
(you will notice the air is sucked from the
plastic bag)
• Loosenthebeltholdingthedustbag,remove
the dust bag from the body
• Attachedanewbag,tightenthebeltusing
Velcro
• Itisimportanttokeepvacuumrunningduring
the bag changing process. This will keep the
apinthecollectionconeclosedensuringno
dust Will drop our from within the collection
cone when bag replacement is being
performed
STORAGE
ORDERING
To ensure product safety and reliability,
and to maintain your warranty, always use
genuine replacement parts from SMITH
when making repairs to equipment.
When ordering please specify the model
and serial number of the machine. In
addition, give a part number, description,
and quantity as listed on your parts list.
If you have any questions about the
operation of your machine or would like
to order replacement parts, contact your
SMITH
Manufacturing representative directly.
Contact 1-800-653-9311 (954-941-9744)
for information.
Visit our website at
www.smithmfg.com
Unplug machine before storing (do not store
machine while plugged into a power source).
Do not store in a location where there are high
temperatures.
Store away from excessive humidity.
TROUBLESHOOTING
PROBLEM
Possible Reason(s)/Solution(s)
MOTOR DOES NO START
No power, cable or switch defective
MOTOR RUNS BUT NO SUCTION
Hose not connected or blocked
MOTOR RUNS W/ POOR SUCTION
Hose damaged
Filter blocked
Top cover loose
DUST BLOWS FROM MOTOR
Filter loose or defective
ABNORMAL NOISE
Check motor(s)
