SMC Networks 8504T FICHE Manual de usuario

EZ Switch 1000

u4 10/100/1000 RJ-45 Ports

uStore-and-Forward mode with wire-speed filtering 

and forwarding

uAuto MDI/MDIX on 1000BaseT ports

uHalf- and full-duplex flow control 

u"Smart Function" features:

n Console port to manage configuration changes

nPort-based VLAN and L2 Trunking with link

ufail-over

nPriority Queues on each port

Desktop and rack mountable

Plug and play for ease of installation, maintenance and

use

User Guide

SMC8504T

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC For its use, nor for any infringements of

patents or other rights of third parties which may result from its use. No license is granted

by implication or otherwise under any patent or patent right of SMC. SMC reserves the

right to change specifications at any time without notice.

SMC Network, Inc.

6 Hughes, Irvine, California

TRADEMARKS

SMC is a registered trademark; and EZ Switch is a trademark of SMC

Networks, Inc. Other product and company names are trademarks or registered trademarks

of their respective holders.

LIMITED LIFETIME WARRANTY

Limited Warranty Statement: SMC Networks, Inc. ("SMC") warrants its products to be free from

defects in workmanship and materials, under normal use and service, for the applicable warranty

term. All SMC products carry a standard 90-day limited warranty from the date of purchase from

SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product

not operating as warranted with a similar or functionally equivalent product, during the

applicable warranty term. SMC will endeavor to repair or replace any product returned under

warranty within 30 days of receipt of the product.

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering

new products within 30 days of purchase from SMC or its Authorized Reseller. Registration can

be accomplished via the enclosed product registration card or online via the SMC web site.

Failure to register will not affect the standard limited warranty. The Limited Lifetime warranty

covers a product during the Life of that Product, which is defined as the period of time during

which the product is an 'Active' SMC product. A product is considered to be ‘Active’ while it is

listed on the current SMC price list. As new technologies emerge, older technologies become

obsolete and SMC will, at its discretion, replace an older product in its product line with one that

incorporates these newer technologies. At that point, the obsolete product is discontinued and is

no longer an 'Active' SMC product. A list of discontinued products with their respective dates of

discontinuance can be found at http://www.smc.com/smc/pages_html/support.html.

All products that are replaced become the property of SMC. Replacement products may be either

new or reconditioned. Any replaced or repaired product carries either a 30-day limited warranty

or the remainder of the initial warranty, whichever is longer. SMC is not responsible for any

custom software or firmware, configuration information, or memory data of Customer contained

in, stored on, or integrated with any products returned to SMC pursuant to any warranty. Products

returned to SMC should have any customer-installed accessory or add-on components, such as

expansion modules, removed prior to returning the product for replacement. SMC is not

responsible for these items if they are returned with the product.

Customers must contact SMC for a Return Material Authorization number prior to returning any

product to SMC. Proof of purchase may be required. Any product returned to SMC without a

valid Return Material Authorization (RMA) number clearly marked on the outside of the package

will be returned to customer at customer’s expense. For warranty claims within North America,

please call our toll-free customer support number at (800) 762-4968. Customers are responsible

for all shipping charges from their facility to SMC. SMC is responsible for return shipping

charges from SMC to customer.

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS

WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY SHALL BE REPAIR OR

REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE

FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF

ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT

OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER

PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE

SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT

BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION

DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS

CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER

INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY

OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT,

FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR

TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL,

CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR

FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING

OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,

PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF SMC OR

ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER

PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO

YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY

FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL BE TAKEN TO

AFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for one year following discontinuance from the active SMC

price list. Under the limited lifetime warranty, internal and external power supplies, fans, and

cables are covered by a standard one-year warranty from date of purchase.

COMPLIANCES

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiated radio frequency energy and, if not installed and used in accordance with instructions,

may cause harmful interference to radio communications. However, there is no guarantee that the

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

lReorient the receiving antenna

lIncrease the separation between the equipment and receiver

lConnect the equipment into an outlet on a circuit different from

That to which the receiver is connected

lConsult the dealer or an experienced radio/ TV technician for help

EC Conformance Declaration – Class A

European contract: SMC Networks Europe

Edificio Conata II

Calle Fructuós Gelabert 6-8, 2°, 4ª

08970 –Sant Joan Despí

Barcelona, Spain

This information technology product complies with ISO/ IEC Guide 22. It conforms to the

following specifications:

EN55022(1998)/ CISPR-22(1985) Class A

EN50082-1: IEC 1000-4-2, 3,4

This information technology product complies with the requirements of the Low Voltage

Directive 73/ 23/ EEC and the EMC Directive 89/ 336/ EEC and carries the CE Mark

accordingly.

SMC EZ Switch 1000

SMC8504T

The SMC EZ Switch 1000 sets a new standard in entry-level gigabit

switching.

Gigabit Ethernet is the perfect solution to bottlenecks at the core of the

network that are the inevitable result of data-intensive applications and

the proliferation of new users. SMC’s EZ Switch 1000 provides a

seamless migration to higher-speed networking while solving bandwidth

issues.

Network users and applications continue to demand bandwidth intensive

software programs, graphically dense materials and desire faster speeds

to the desktop. SMC EZ Switch 1000 meets that demand with its 4 port

standards-based gigabit switch. This 1U rack mount or desktop switch

seamlessly integrates with the rest of the network through its

auto-negotiating, non-blocking design. With “Smart Features” to

support VLAN, Priority Queing, Trunking and Failover, the SMC8504T

is the most cost effect method for brining speed and service to the

desktop.

Thank you for your purchase and please contact SMC for FREE Service

and Support at 1-800 SMC-4YOU.

Sincerely,

SMC Networks, Inc.

ABOUT THE EZ SWITCH 1000

SMC8504T

The EZ Switch 1000 (SMC8504T) is an 4-port Giga Ethernet Switch. Its 4

10/100/1000BASE-TX ports deliver dedicated 10/100/1000Mbps links to each attached LAN

segment –all with conventional cabling and adapters. Auto-Negotiation is used to select the

optional transmission speed and communication mode for each connection. With

store-and-forward switching and flow control, maximum data integrity is always maintained,

even under heavy loading. Easy installation and reliability make this plug-and-play switch an

ideal choice for smooth Giga Fast Ethernet integration.

Features and Benefits

uFull-duplex on all ports

uANSI/ IEEE802.3/ IEEE802.3u/ IEEE802.3z and IEEE802.3ab compliance ensures

compatibility with standards-based hubs, switches and cards from any vendor

uStore-and-forward switching ensures error-free transmission

uHalf-and full-duplex flow control prevents packets from being dropped under heavy loading

uSmart function:

-support on console port for switch configuration change

-support per port Port-based VLAN and L2 Trunking with link fail-over

-support IEEE802.1p four Priority queues on each port

uPlug and play

uBuilt-in wiring crossovers on all ports allow connections to servers and workstations to be

made with straight-through cabling

u“At-a-glance” LEDs for port and system status monitoring

uDesktop and rack mountable

INSTALLING THE EZ SWITCH 1000

The EZ Switch 1000 can be placed on a desktop or shelf, or installed in a standard 19-in equipment

rack.

Equipment Checklist

After unpacking the EZ Switch 1000, check the contents of the box to be sure you’ve received the

following components:

lEZ Switch 1000 SMC8504T

lAppropriate AC power cable

lRS 232 console port cable

lRack mount bracket set

lSMC Warranty Registration Card

lThis User Guide

Selecting a Site

Be sure to follow the site selection guidelines below when choosing a location:

uSelect a suitable location for the switch:

lIt should be accessible for installing, cabling and maintaining the switch

lThe temperature and humidity should be within the ranges listed in the specifications.

lThe status LEDs should be clearly visible.

lThere should be adequate space (approximately two inches) on all sides for proper air flow.

uBefore rack mounting the switch, pay particular attention to the following factors:

lTemperature: Since the temperature within a rack assembly may be

higher than the ambient room temperature, check that the rack-

environment temperature is within the specified operating temperature

range.

lMechanical Loading: Do not place any equipment on top of a rack-mounted switch.

lCircuit Overloading: Be sure that the supply circuit to the rack assembly is not overloaded.

lGrounding: Rack-mounted equipment should be properly grounded. Particular attention

should be given to supply connections other than direct connections to the mains.

uMake sure twisted-pair cable is always routed away from power lines, fluorescent lighting

fixtures and other sources of electrical interference such as radio, transmitters, etc.

uMake sure that a properly grounded power outlet is within 8 feet (2.44 meters) of the switch

and is powered from an independent circuit breaker. As with any equipment, using a filter or

surge suppressor is recommended.

Instructions

1. Positioning the Switch: For desktop or shelf mounting, attach the four adhesive foot pads to

the bottom of the switch. For rack-mounting, attach the mounting brackets to both sides of the

switch with the screws provided, then install the switch in the rack.

2. Applying Power: Plug one end of the power cable into the power receptacle at the back of the

switch, and the other end into an appropriate electrical outlet. Check the Power LED to be sure

it is on.

Note: It is not necessary to power off the switch before connecting or disconnecting any UTP

cables, as these actions will not disrupt the operation of other devices attached to the switch.

3. Connecting PCs: Connect each PC to an RJ-45 port on the switch with a straight-through

twisted-pair cable segment, maximum length 100 meters (328 feet). The EZ Switch 1000 will

support up to 4 PCs.

Note: If an attached device does not support Auto-Negotiation, the data rate will be sensed

automatically and the communication mode will default to half duplex.

4. Cascading Switches and Other Network Devices: If you need more ports, connect the port

with crossover cable on another device. See the “Cable Specifications” and “Connectivity

Guidelines” sections of this guide for further information.

SAMPLE APPLICATIONS

Standalone LAN

High-Speed Switch Links

QoS to ensure important data transmissions like Voice

CONFIGURATION

1. Connect to PC

RS-232 serial cable

Prepare a RS-232 serial cable. Attach the 9-pin female connector to the male connector on the

switch. Plug the other side of this cable to your PC.

2. Hyper Terminal

In Windows 95/98, launch “Hyper Terminal”, create a new connection, and adjust settings as:

l19,200bps

l8 Data bits

lNone Parity

l1 Stop bits

lNone Flow control

Main Menu

Launch the new terminal you just set up, and then, turn on the switch. See the following

message for successful connection:

SMC 8504T (4-port gigabit) [ver: x.xx]

[ 0 ] Speed/ Duplex Setting

[ 1 ] Address Learn

[ 2 ] VLAN

[ 3 ] Queues Priority

[ 4 ] Trunk

[ 5 ] Uplink Port

[ 6 ] Monitor Port

[ 7 ] View Configuration

[ 8 ] Restore To Factory Default

Select: >>

Speed Mode

Input port number for which you want to configure, enter port number and select speed mode

lSpeed/ Duplex Setting

Which port? (1-4, E: Exit, A: Select all ports) …

lPort setting

[ 1 ] Auto-negotiation

[ 2 ] 10 Half Duplex

[ 3 ] 10 Full Duplex

[ 4 ] 100 Half Duplex

[ 5 ] 100 Full Duplex

[ 6 ] 1000 Half Duplex

[ 7 ] 1000 Full Duplex

Select: >> 1

lFlow Control

Enable flow control? (Y/N)

After finish flow control selection

l“Please Wait”

and configure another port or exit

3. Address Learning

Aging Control

A port’s MAC address register is cleared on power-up, or hardware reset. If this item is enabled,

the dynamically learned SA will be learned if it is not refreshed in less than the aging time.

lSelect “1”

Aging Control

[ E ] Enable

[ D ] Disable

Select: >>

lSelect “e”

Max address-aging timer

Max Aging time ( 1 –10 minute) …

4. VLAN Setting

VLAN

Each port of the switch can be assigned to one or multiple VLANs (this device can be divided

into 4 VLANs maximum). Frames from the source port will only be forwarded to destination

ports within the same VLAN domain. A broadcast/ multicast frame will be forwarded to all

ports.

lSelect: >> 2

VLAN Group 1, assigned ports >>

[ S ] Port Select

[ D ] Port Delete

[ A ] Select All ports

[ C ] Save

[ E ] Exit

Select: >>

Queues Priority

The switch can support priority either from tagged frame or based on the input ports. This entry

is for port-based priority, level 0 stand for the lowest priority, level 7 as highest priority. Flow

control will be disable if priority level 7 was selected.

lSelect: >> 3

which port: (1-4, E: Exit) …

5. Trunk Setting

Trunk

This switch can assigned L2 Trunking automatically load-balances among its member ports

through the use of unique and statistical methods, and provides link resiliency (link-fail-over

Otros manuales para 8504T FICHE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de SMC Networks

SMC Networks

SMC Networks PF2MC7 Series Manual de usuario

SMC Networks

SMC Networks ISE71 AB Series Manual de usuario

SMC Networks

SMC Networks TigerSwitch SMC6128PL2 Manual de programación

SMC Networks

SMC Networks 6726L3 - FICHE TECHNIQUE Guía de instalación

SMC Networks

SMC Networks D-H7A2*-588 Manual

SMC Networks

SMC Networks SMC8024L2 Manual de programación

SMC Networks

SMC Networks TIGERSWITCH 10/100 Manual de usuario

SMC Networks

SMC Networks PF2 Series Manual de usuario

SMC Networks

SMC Networks TigerSwitch SMC6128PL2 Manual de usuario

SMC Networks

SMC Networks ISE70G-N02-L2 Manual de usuario

SMC Networks

SMC Networks EZ Networking SMC-EZ108FDT Manual de usuario

SMC Networks

SMC Networks SMC EZ Stack 10/100 SMC5216 Manual de usuario

SMC Networks

SMC Networks SMC7724M Manual de programación

SMC Networks

SMC Networks SMC6924VF Manual de usuario

SMC Networks

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Manual de programación

SMC Networks

SMC Networks EZSwitch SMCGS24C-Smart Manual de usuario

SMC Networks

SMC Networks SMC8724ML3 Manual de usuario

SMC Networks

SMC Networks 8708L2 Manual de programación

SMC Networks

SMC Networks TigerStack II SMC8926EM Manual de usuario

SMC Networks

SMC Networks TigerSwitch 10/100 SMC6750L2 Manual de programación

SMC Networks

SMC Networks 6924MT Manual de usuario

SMC Networks

SMC Networks D-F8B Series Manual de instrucciones

SMC Networks

SMC Networks EZ Connect Manual de usuario

SMC Networks

SMC Networks 6709GL2 INT Manual de programación

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario