SMC Networks VZ400 Series Manual de usuario

Large flow capacity

Low power consumption:

1.8 W (75 mA, 24 VDC)

Plug connector

One-touch wiring of plug

connectors

Common pilot exhaust sub-

plate mounted and manifold

Model

Solenoid Specifications

JIS Symbol

Specifications

Body ported

Base mounted

Option

Individual exhaust

Piping Choice of pilot valve exhaust

Body ported

Base mounted

VZ412N.C.

Type of

actuation

N.O.

N.C.

N.O.

Common exhaust

VZ422

—

VZ412∗

VZ422∗

VZ415

VZ425

∗Body ported type provides both individual exhaust and common exhaust.

Maximum operating pressure

Proof pressure

Ambient and fluid temperature

Enclosure

Manual override

1.0 MPa

1.5 MPa

Fluid Air/Inert gas

Type

Specifications

Body ported

N.O. valveN.C. valve

Port size

Max. operating frequency (c/s) (AC/DC) (1)

Response time (ms) (AC/DC) (2)

Weight (kg) (3)

Minimum operating pressure 0.15 MPa

–10 to 50°C

Lubrication Not required

Dustproof (5)

Push type (Safety style), Locking type (Tool required), Locking type (Manual)

Shock/Vibration resistance (m/s2)150/50 (6)

Note 1) Minimum operating frequency: As per JIS B 8373 (Once in 30 days)

Note 2) Based on JIS B 8375-1981 (Supply pressure; 0.5 MPa; without surge voltage suppressor)

Note 3) Value for grommet (Sub-plate weight: 0.055 kg)

Note 4) “Note 1)” and “Note 2)” are with controlled clean air.

Note 5) Based on JIS C 0920

Note 6) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial

direction and at the right angles to the main valve and armature in both

energized and de-energized states every once for each condition. (Values

at the initial period)

Vibration resistance

:No malfunction occurred in a one-sweep test between 45 and 2000 Hz.

Test was performed at both energized and de-energized states in the

axial direction and at the right angles to the main valve and armature.

(Values at the initial period)

21/21 or less

0.125

Base mounted (With sub-plate)

N.O. valveN.C. valve

Rc 1/8, 1/4

21/21 or less

0.250

Rc 1/8

Flow characteristics

C[dm3/(s·bar)]

C[dm2/(s·bar)]

1  2

(P  A)

2  3

(A  R)

Note 1) In the case of grommet type, it is equipped on the middle of lead wire.

Note 2) Based on JIS C 4003

Electrical entry

Coil rated voltage (V)

Allowable voltage fluctuation (%)

Apparent power (VA) AC

AC 50/60 Hz

Inrush

Holding

Grommet (G), Plug connector (L), Plug connector (M), DIN terminal (D)

100, 200, 24∗, 48∗, 110∗, 220∗

24, 6∗, 12∗, 48∗

–15 to +10% of rated voltage

Coil insulation type Class E or equivalent (120°C) (2)

Temperature rise (°C) 45 or less

Power consumption (W) 1.8 (With indicator light: 2.1)

4.5/50 Hz, 4.2/60 Hz

3.5/50 Hz, 3/60 Hz

DC: Diode, AC: ZNR

DC: LED (Red), AC: Neon bulb

Surge voltage suppressor (1)

Indicator light

∗Option

Description

Silencer

Foot bracket (With screw) (1)

Part no.

R 1/8

R 1/4 (2)

Note

VZ4000-22A For VZ42

AN110-01 Noise reduction: 21 dB (ø13 x 38 l)

AN203-02 Noise reduction: 25 dB (ø16 x 36 l)

Note 1) For body ported type Note 2) For sub-base mounted type

3 Port Solenoid Valve

Metal Seal

Series VZ400

2.0

0.14

0.49

2.2

0.17

0.53

2.0

0.17

0.49

2.2

0.17

0.53

2.4

0.19

0.57

2.2

0.11

0.49

2.4

0.19

0.57

1.9

0.32

0.45

4-15-10

N.C. (VZ412)

Construction (Body ported)

Component Parts Replacement Parts

N.O. (VZ422)

No.

Description

Stainless steel

Aluminum die-casted

Material Note

Polyacetal

Platinum silver

Spool/Sleeve

Body

Piston

No.

Description

NBR

Stainless steel

Material Note

NBR

O-ring

Return spring

Seal

uNBR

O-ring

iNBR

O-ring

NBRMini Y seal

Carbon steel

Round head combination screw

NBR

O-ring

Carbon steel

Round head combination screw

!3 —

Pilot valve assembly SCZ4--

Individual pilot exhaust

Common pilot exhaust

Body ported

Base mounted 5

Body type

Without sub-plate

Rc 1/8

Body ported

Base mounted 01

Nil

N.C. (Normally closed)

N.O. (Normally open)

Type of actuation

1100 VAC, 50/60 Hz

2200 VAC, 50/60 Hz

3∗110 VAC, 50/60 Hz

4∗220 VAC, 50/60 Hz

524 VDC

6∗12 VDC

9∗Other

Rated voltage

Foot bracket

F∗

Silencer

Foot bracket + Silencer

K∗

Option

Nil Push type (Safety style)

BLocking type (Tool required)

CLocking type (Manual)

Manual override

Port size

Nil None

G: Grommet,

Lead wire length

300 mm

L: L plug connector,

With lead wire

LN: L plug connector,

Without lead wire

LO: L plug connector,

Without connector

H: Grommet,

Lead wire length

600 mm

M: M plug connector,

With lead wire

MN: M plug connector,

Without lead wire

MO: M plug connector,

Without connector

D: DIN terminal

DO: DIN terminal,

Without connector

SWith surge voltage suppressor

With light/surge voltage suppressor

(Indicator light is not available

for grommet type.)

Light/Surge voltage suppressor

Electrical entry

∗ Option

Type “G”, “L”, and “M”: Lead wire 300 mm

011 2VZ4 G1

∗Only body ported type

Series VZ400

Rc 1/8

Rc 1/4

∗“DOZ” is not available.

How to Order

4-15-11

Series VZ400

3 Port Solenoid Valve

Metal Seal, Body Ported/Base Mounted

V100

SYJ

S070

VKF

VQZ

VFN

N.C. (VZ415)

Construction: Sub-plate Mounted

Component Parts Replacement Parts

N.O. (VZ425)

No.

Description

Stainless steel

Aluminum die-casted

Material Note

Polyacetal

Platinum silver

Spool/Sleeve

Body

Piston

Aluminum die-casted

Sub-plate

No.

Description

NBR

Stainless steel

Material Part no.

NBR

Gasket

Return spring

O-ring

NBRSeal

NBR

O-ring

NBR

O-ring

NBR

O-ring

NBRMini Y seal

Carbon steel

Round head combination screw

!6 —

Pilot valve assembly

Carbon steel

Round head combination screw

Carbon steel

Round head combination screw

SCZ4--

1100 VAC, 50/60 Hz

2200 VAC, 50/60 Hz

3∗110 VAC, 50/60 Hz

4∗220 VAC, 50/60 Hz

524 VDC

6∗12 VDC

9Other

Nil

Push type (Safety style)

BLocking type (Tool required)

CLocking type (Manual)

Manual override

Nil None

S With surge voltage suppressor

Z∗With light/surge voltage suppressor

Light/Surge voltage suppressor

2Body side exhaust

(Type 30, 50)

1Spacer side exhaust

(Type 20)

Pilot pressure exhaust

Rated voltage

∗ Option

∗Indicator light is not available for

grommet type.

∗“DOZ” is not available.

SCZ4 G 1 1

Series VZ400

LN L plug

connector

Grommet

M plug

connector

DIN

terminal

With lead wire

600 mm lead wire

300 mm lead wire

Without lead wire

Without connector

With lead wire

Without lead wire

Without connector

With connector

Without connector

Electrical entry

Sub-plate Assembly Part No.: VZ400-S-

∗Mounting bolt and gasket are not attached.

How to Order Pilot Valve Assembly

Series VZ400

4-15-12

Dimensions: Body Ported

L VZ4 2-L(Z)-01

M plug connector: VZ4 2-M(Z)-01

Locking type manual override

DIN terminal: VZ4 2-D(Z)-01

Max.10 91

52.1

12 19.5

26.7

Pg7

Applicable cable O.D. ø3.5 to ø7

With light/surge voltage suppressor

2-ø3.4 mounting hole

Grommet: VZ4 2-G

H (S)-01 With foot bracket: VZ4 2--01-F

Pilot EXH

With light/surge voltage suppressor

2-ø3.4 mounting hole

With light/surge voltage suppressor

2-ø3.4 mounting hole

≅300

(Lead wire length)

≅300

(Lead wire length)

Manual override

(Non-locking)

Manual override

(Locking type (Tool required))

3-Rc 1/8

2-ø4.5

mounting hole

Foot bracket

M5 x 0.8

Pilot EXH

Manual override

(Locking type (Manual))

G: 300

H: 600

Lead wire length

2-ø3.4 mounting hole

4-15-13

Series VZ400

3 Port Solenoid Valve

Metal Seal, Body Ported/Base Mounted

V100

SYJ

S070

VKF

VQZ

VFN

Dimensions: Sub-plate Mounted

M plug connector: VZ4 5-M(Z)-

Locking type manual override

DIN terminal: VZ4 5-D(Z)-

53.5

Max.10 98

75.8

M5 x 0.8

With light/surge voltage suppressor

(Pilot EXH)

Applicable code O.D. ø3.5 to 7

3-Rc1/8, 1/4

Pg7

Grommet: VZ4 5-G

H (S)-

L plug connector: VZ4 5-L(Z)-01

2-ø4.5 mounting hole

Manual override

(Non-locking)

G: 300

H: 600

Lead wire length

M5 x 0.8

(Pilot EXH)

M5 x 0.8

(Pilot EXH)

M5 x 0.8

(Pilot EXH)

With light/surge voltage suppressor

≅300

(Lead wire length)

≅300

(Lead wire

length)

Manual override

(Locking type (Manual))

Manual override

(Locking type (Tool required))

Series VZ400

4-15-14

Model

Instruct by specifying the valves, blanking plate option to be mounted on

the manifold along with the manifold base model no. And for the order of

valves installation or option’s position, instruct separately by the manifold

specification sheet.

(Example)

VV3Z4-30-061 (6 stations) VV3Z4-S50-061-C8 (6 stations)

VZ412-1G-01······ 3 pcs. VZ415-5L········3 pcs.

VZ412-1G-01······ 2 pcs. VZ415-5L········3 pcs.

VVZ400-32A-1·····1 pc. (Blanking plate)

VV3Z4-50-061-01 (6 stations)

VZ415-1G············ 3 pcs.

VZ425-1G············ 2 pcs.

VVZ400-32A-2·····1 pc. (Blanking plate)

VV3Z4-50-061-

VV3Z4-20-061

VV3Z4-50-061-C8

VV3Z4-20-061

10630

Series VZ400

Manifold

VV3Z4

Manifold specifications/Single base type

B mount (P/E port size)

Symbol

Body ported

(Individual pilot exhaust)

Body ported

(Common pilot exhaust)

Base mounted

(Common pilot exhaust)

2(A) port direction: opposite side of solenoid valve

S50∗

Base mounted

(Common pilot exhaust)

2(A) port direction: same side of solenoid valve

Piping P, E port

Port size

Rc 1/4

Applicable valve

model

VZ42

VZ45

2 stations

20 stations

Stations

Rc 1/4

Symbol

Passage

Specifi-

cations

Symbol

Porting

specifications

2(A)

Top, Side

3(R)1(P)

CommonCommon

Applicable base

Type 20, 30 and 50

A port size on base side

Nil

Model

Symbol

VV3Z4-S50 ∗

VV3Z4-50

Without 2(A) port

(Body ported type 20, 30)

Rc 1/4

Built-in One-touch fittings

Applicable tubing O.D. ø6

Built-in One-touch fittings

Applicable tubing O.D. ø8

Rc 1/8

∗VV3Z4-S50: only C6 & C8.

Manifold type

Manifold base model

2(A)

port

Piping direction/

Location

Port size

P, E port

Applicable

valve model

Blanking plate

Port size

VV3Z4-20 VV3Z4-30 VV3Z4-50

Individual exhaust

Top/Valve

Rc 1/4

VZ412-01

VZ422-01

Body ported

Common exhaust

VVZ400-31A-1 VVZ400-32A-1

Common exhaust

Side/Base (Opposite side of solenoid)

Built-in One-touch fittings

VV3Z4-S50

Common exhaust

Built-in One-touch fittings

Side/Base

(Same side of solenoid)

C6, C8C6, C8

Rc 1/4

VZ415-

VZ425-

Base mounted (Without sub-plate)

VVZ400-32A-2

VVZ400-31A-2

Rc1/8, 1/4

Passage

Valve stations

Single base, B mount

Common SUP/EXH type

Max. 20 stations

Rc 1/8

Model

VV3Z4-20

VV3Z4-30

VV3Z4-50

-S50

Part no.

BG-VZ402

BG-VZ403

BG-VZ405

Screws and Gasket Assembly Part No.

Series VZ400

Manifold Specifications

How to Order Manifold Base

···

∗Type S50 is available only with built-in One-touch fittings.

Manifold Variations: VV3Z4

Pilot valve exhaust

4-15-15

V100

SYJ

S070

VKF

VQZ

VFN

Individual exhaust: VV3Z4-20

Dimensions: Individual Exhaust/Common Exhaust

Common exhaust: VV3Z4-30

Stations

n: Stations

Symbol

116

107

135

126

154

145

173

164

192

183

211

202

230

Formula

L1= 19n + 12

L2= 19n + 40

Stations

n: Stations

Symbol

116

107

135

126

154

145

173

164

192

183

211

202

230

Formula

L1= 19n + 12

L2= 19n + 40

(G) (L) (M)

(D)

Max.10 92

77.3

54.5

With light/surge voltage suppressor

4-Rc 1/4

Pilot EXH

Max.10 93

26.6

87.5

79.9

21.6 10.5

30.322.3

11.5

(Pilot EXH port)

2-M5 x 0.8

With light/surge voltage suppressor

4-Rc 1/4

2-ø5.3

mounting hole

P=19

P = 19

Manual override

(Non-locking)

Manual

(Non-locking)

n-Rc 1/8

4-Rc 1/4

4-Rc 1/4 4-Rc 1/4

Pilot EXH

Pilot EXH Pilot EXH

≅300

(Lead wire length)

≅300

(Lead wire length)

≅300

(Lead wire length)

≅300

(Lead wire length)

≅300

(Lead wire length)

≅300

(Lead wire length)

2-ø5.3

mounting

hole

2-M5 x 0.8

(Pilot EXH)

2-M5 x 0.8

(Pilot EXH)

2-M5 x 0.8

(Pilot EXH)

With light/surge voltage suppressor

With light/surge voltage suppressor With light/surge voltage suppressor

Series VZ400

4-15-16

Common exhaust: VV3Z4-50

Dimensions: Common Exhaust

Common exhaust: VV3Z4-50 (Built-in One-touch fittings manifold)

Stations

n: Stations

Symbol

116

107

135

126

154

145

173

164

192

183

211

202

230

Formula

L1= 19n + 12

L2= 19n + 40

Stations

n: Stations

Symbol

116

111

136

131

156

151

176

171

196

191

216

211

236

Formula

L1= 20n + 11

L2= 20n + 36

n: Stations

116

107

135

126

154

145

173

164

192

183

211

202

230

Formula

L1= 19n + 12

L2= 19n + 40

Common exhaust: VV3Z4-S50 (Built-in One-touch fittings manifold)

(G) (L) (M)

(D)

Max.10

87.5

79.9

21.6

10.5

30.3 22.3

11.5 11.5

(Pilot EXH)

2-M5 x 0.8

PEPE

With light/surge voltage

suppressor

4-Rc1/4

Max.10

84.3

4.4

2-M5x0.8

With light/surge voltage suppressor

Max.10 91

61.4

84.3

4.4

2-M5 x 0.8

With light/surge voltage suppressor

Stations

Symbol

Manual

override

(Non-locking)

Manual

override

Manual

override

(Non-locking)

P = 20

2-ø5.3

mounting

hole

( ): A port Rc 1/8

≅300

(Lead wire length)

≅300

(Lead wire length)

2-M5 x 0.8

(Pilot EXH) 2-M5 x 0.8

(Pilot EXH)

2-M5 x 0.8

(Pilot EXH)

4-Rc 1/4

4-Rc 1/4 4-Rc 1/4 4-Rc 1/4 4-Rc 1/4

4-Rc 1/4 4-Rc 1/4

2-ø5.3

mounting

hole

2-ø5.3

mounting hole

P = 19

L side

side

R side

2-M5 x 0.8

4-Rc 1/4 4-Rc 1/4

≅300

(Lead wire length)

≅300 ≅300

(Lead wire length)

≅300

(Lead wire length)

With light/surge voltage

suppressor

With light/surge voltage

suppressor

With light/surge voltage

suppressor

With light/surge voltage

suppressor

With light/surge voltage

suppressor

With light/surge

voltage

suppressor

≅300

(Lead wire length)

4-Rc 1/4

(Lead wire length)

≅300

(Lead wire

length)

≅300

(Lead wire

length)

(Non-

locking)

4-15-17

Series VZ400

3 Port Solenoid Valve

Metal Seal, Body Ported/Base Mounted

V100

SYJ

S070

VKF

VQZ

VFN

Plug Connector Type

With indicator light (AC)

With indicator light (DC)

In applications where the supply voltage is

DC, correctly connect the lead wires to +

(positive) and – (negative) indications on the

connector or to the markings.

For those on which the lead wires have been

pre-wired, the positive side is red and

negative side is black.

DIN Terminal Type

In the case of DC wiring, connect terminal no. 1

of the connector to the positive [+] side, and

terminal no. 2 to the negative [–] side. (Refer to

the marks on the terminal board.)

Attaching and detaching connectors

1. To attach a connector, hold the lever and

connector unit between your fingers and

insert straight onto the pins of the

solenoid valve so that the lever’s pawl is

pushed into the groove and locks.

2. To detach a connector, remove the pawl

from the groove by pushing the lever

downward with your thumb, and pull the

connector straight out.

80 A

DXT170

Lead wire color

Symbol

With socket

Lead wire

Blue (2)

Red (2)

Gray (2)

Note

Nil Socket only

(2 pcs.)

Without

lead wire

For 100 VAC

For 200 VAC

Another VAC

Red: +, Black: –

For DC

Lead wire

length

Nil

Symbol

Lead wire

length (mm)

300

600

1000

1500

2000

2500

3000

Ex.)

For lead wire length (1000 mm)

Solenoid valve:

VZ2150-5M0-01···········5 pcs.

Connector assembly:

DXT170-80-4A-10········5 pcs.

Peel 3.2 to 3.7 mm of the tip of lead wire,

enter the core wires neatly into a socket

and crimp it with a special crimp tool. Be

careful so that the cover of lead wire does

not enter into the crimping part. (Crimping

tool part no.: DXT 170-75-1)

Precaution 1

How to Use Plug Connector

Note) When ordering a valve

with a lead wire of 600

mm or longer, be sure to

indicate the model

number of the valve

without connector and

connector assembly.

Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page 4-18-2.

Caution

Surge Voltage Suppressor

Grommet Type

Crimping the Lead Wire and Socket

Connector assembly part no.

For AC

Molded coil

Concave groove

Cover

L type

M type

Lever

DC indicator

Connector

Hook

Red

Core wire crimping

area Crimping area

Core wire

Lead wire

Cover

Socket part no.

DXT170-71-1

Black

Lead wire

0.2 to 0.33 mm2

(Max. cover O.D.:

ø1.7 mm)

DC coil color: +Red, –Black

Coil

For DC

Black

Red

Black

Neon

light

Neon

bulb

Red

Marking ∗Indicator light

(Built in the connector)

Surge voltage suppressor

(Built-in the terminal block)

∗ Marking

With indicator light (AC)

With indicator light (DC)

Varistor

Diode

Series VZ200/400

4-15-18

Connector assembly with protective cover

Connector assembly with protective cover enhances dust protection.

•Effective to prevent short circuit accidents due to penetration of foreign matter into the

connector section.

•The material of cover is chloroprene rubber for electricity which is excellent in

weathering and electrical insulating properties. But don’t splash with cutting oil.

• Simple and unencumbered appearance by adopting round-shaped cord.

Dimensions: Connector Assembly with Cover

123 ADXT170

Lead wire length

Nil

300

Symbol Lead wire length

L (mm)

600

1000

1500

2000

2500

3000

Attaching and detaching lead

wires with sockets

1. Attaching

Insert the sockets into the square holes

of the connector (with + and –

indication) and continue to push the

sockets all the way in until the lock by

hooking into the seats in the connector.

(When they are pushed in, their hooks

open and they are locked

automatically.) Then confirm that they

are locked by pulling lightly on the lead

wires.

2. Detaching

To detach a socket from a connector,

pull out the lead wire while pressing the

socket’s hook with a stick having a thin

tip (approx. 1 mm). If the socket will be

used again, first spread the hook

outward.

How to Calculate the Flow Rate

For obtaining the flow rate, refer to page

4-1-6.

Caution

How to Order

Connector

Lead wire

Hook

Socket

Red Black Black

Polarity indication

Precaution 2

Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page 4-18-2.

How to Use Plug Connector

4-15-19

Series VZ200/400

V100

SYJ

S070

VKF

VQZ

VFN

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de SMC Networks

SMC Networks

SMC Networks 50-VFE Manual de usuario

SMC Networks

SMC Networks LVP Series Manual de usuario

SMC Networks

SMC Networks VM1000 Series Manual de usuario

SMC Networks

SMC Networks IL220-02 L Series Manual de usuario

SMC Networks

SMC Networks VPA31 5 Series Manual de usuario

SMC Networks

SMC Networks S0700 Manual

SMC Networks

SMC Networks 5100 IT Series Manual de usuario

SMC Networks

SMC Networks Barricade SMC2804WBR Manual de usuario

SMC Networks

SMC Networks SJ 1000 Series Manual de usuario

SMC Networks

SMC Networks VQ100 Series Manual

SMC Networks

SMC Networks EX600 Series Manual de usuario

SMC Networks

SMC Networks VJ3000 Manual

SMC Networks

SMC Networks EX260-SEN2-X205 Manual de usuario

SMC Networks

SMC Networks XLS Series Manual de usuario

SMC Networks

SMC Networks AVA2000 Series Manual de usuario

SMC Networks

SMC Networks VJ100 Manual

SMC Networks

SMC Networks XLA Series Manual de usuario

SMC Networks

SMC Networks XLH16 Manual de usuario

SMC Networks

SMC Networks EX600-SPN4 Manual de usuario

SMC Networks

SMC Networks TigerSwitch series Manual de usuario

SMC Networks

SMC Networks 300 Series Manual de usuario

SMC Networks

SMC Networks VR51 Manual

SMC Networks

SMC Networks AKP Series Manual de usuario

SMC Networks

SMC Networks VHS20 Series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario