Smartwares SH8-90604 Manual de usuario
SH8-90604 + SH8-99604
Table of Contents
English ..................................................................................................................... iii
Nederlands .............................................................................................................. xii
Deutsch.................................................................................................................... xxii
Français.................................................................................................................... xxxiii
Smartwares Table of Contents
SH8-90604_IM iii
Table of Contents
1 Safety ................................................................................................................................................................... 4
1.1 Installation Safety ................................................................................................................................................. 4
1.2 Operation Safety................................................................................................................................................... 4
1.3 Replacing fixture Safety ........................................................................................................................................ 4
2 Introduction ......................................................................................................................................................... 5
3 Installation ........................................................................................................................................................... 6
3.1 Insert the switch battery....................................................................................................................................... 6
3.2 Pairing the wall switch convertor ......................................................................................................................... 6
3.2.1 Pairing additional lights............................................................................................................................ 6
3.3 Single switch installation ...................................................................................................................................... 7
3.4 Double switch installation .................................................................................................................................... 8
3.5 Hotel switch installation ....................................................................................................................................... 8
4 Controlling your lights .......................................................................................................................................... 10
4.1 HomeWizard App.................................................................................................................................................. 10
4.2 Manual operation ................................................................................................................................................. 10
5 Specifications ....................................................................................................................................................... 11
1 | Safety Smartwares
4 SH8-90604_IM
1 Safety
1. Please read these instructions carefully before installing and using the product.
2. Do not cut the power supply cable to extend it; the device (convertor) will not
work with a longer cable. Do not plug in the device before all the wiring has been
finished.
1.1 Installation Safety
1. Keep children and bystanders away while installing the products. Distractions can
cause you to lose control.
2. Do not overreach when installing this product. Keep proper footing and balance at
all times. This enables better control in unexpected situations.
3. This product is not a toy. Mount it out of reach of children.
1.2 Operation Safety
1. Do not operate electrically powered products in explosive atmospheres, such as in
the presence of flammable liquids , gases, or dust. Electrically powered products
create sparks which may ignite the dust or fumes.
2. The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be un-
derstood by the operator that common sense and caution are factors which can-
not be built into this product, but must be supplied by the operator.
3. Do not expose the Power Adapter of this product to rain or wet conditions. Water
entering the Power Adapter will increase the risk of electric shock.
4. Do not abuse the Power Cord. Never use the cord for unplugging the plug from the
outlet. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
5. The adapter must match the outlet. Never modify the plug in any way. Unmodified
plugs and matching outlets will reduce risk of electric shock.
1.3 Replacing fixture Safety
DANGER
Not turning off the power may result in electric shock
Due to the wall switch convertor, the electric circuit is always powered on. If
you want to replace the light fixture, follow the procedure below:
a) Turn off the power.
b) In your electrical circuit panel, locate the circuit breaker control for the light
fixture you will be working on.
c) Switch the circuit off.
ðYou can safely replace the light fixture.
Smartwares Introduction | 2
SH8-90604_IM 5
2 Introduction
The Wall switch convertor is a solution for your Smartwares smart lighting. Together
with the Smartwares Link, the built-in unit makes your traditional wall switch smart
with an easy and quick installation. When installed, you can control your smart bulbs
with your smartphone, even when the traditional wall switch is turned off.
If you have set timers or use geo-fencing to switch your lights, you will never have to
worry that some of your lights are offline because the power has been turned off via
the traditional wall switch. This product is ideal if you have visitors or family members
who are not too familiar with smart bulbs and prefer to use the existing wall switch.
3 | Installation Smartwares
6 SH8-90604_IM
3 Installation
3.1 Insert the switch battery
Illustration1: Switch battery lid
As the wall switch converter will convert your standard light switch into a wireless
switch, a battery is required. Follow the procedure below to insert the battery (see il-
lustration 1):
a) Rotate the lid of the switch counter clockwise (see markings on the lid).
b) Remove the lid.
c) Insert the battery (text on battery facing up).
d) Place the lid and rotate clockwise to fasten.
3.2 Pairing the wall switch convertor
To make the wall switch converter function, it first must be paired. You can choose to
either pair it to the Link gateway, or to a compatible light bulb.
Please keep in mind that when the wall switch convertor is paired to a bulb, your tradi-
tional wall switch is not operable with the HomeWizard Link app.
Important: The wall switch converter does not need to be connected to a light switch
for the pairing to function. The pairing procedure is a preparation for the actual install-
ation. (See installation sections).
Pair convertor to Link gateway
You can now start to add the wall switch converter to the Link gateway.
a) In the HomeWizard Link app, go to settings, and tap “add device”.
b) Select the Wall switch converter from the list, and follow the steps in the app to
successfully add the device.
ðYou can now start with the installation of the Wall switch converter.
Pair converter to a light bulb
Follow the procedure below to complete the pairing process.
Before you start, make sure that you have:
üInstalled the light bulb in a compatible socket with the power turned off.
c) On the wall switch converter: Press and hold the button for 5 seconds or after the
LED flashed 8 times and starts flashing rapidly. (The LED will flash as soon as you
press the button but will increase in speed after 5 seconds)
d) Turn the light bulb on. (The light bulb will start to flash if successful.)
e) If you for any reason need to reset the wall switch converter, press and hold the
button for 10-15 seconds.
ðYou can now start with the installation of the Wall switch converter.
Note: If you wish to connect additional lights, please refer to chapter 3.2.1.
3.2.1 Pairing additional lights
You can control multiple lights with one wall switch convertor. To add more lights to
the first paired light follow below procedure:
Smartwares Installation | 3
SH8-90604_IM 7
a) Make sure the light bulb you wish to pair is unscrewed.
b) Press and hold the button on the wall switch convertor for a short period (<1
second), the LED will start flashing.
c) Screw the light bulb in the socket.
d) The light will flash orange and blue to indicate that it is paired to the wall switch
convertor.
3.3 Single switch installation
Illustration2: Mark position and re-
move cables
Illustration3: Connect power to
connection terminal
Illustration4: Connect switch con-
verter to the light switch
Follow the procedure below to install the wall switch converter on a single button light
switch.
Before you start, make sure that you have:
üSwitched off the mains supply breaker.
üMeasured that there is no power present, using a voltage meter.
üInstalled the battery in the wall switch converter. (See section “Install the switch
converter battery”.)
üPaired the light bulb with the wall switch converter. (See section “Pair light bulb to
switch converter”.)
a) On the light switch: Remove the switch face-plate. (See illustration 2)
b) Loosen and remove the screws holding the switch in place.
c) Mark the terminals where the cables are connected.
d) Remove the cables from the light switch.
e) Insert the cables into the connection terminal.
f) On the light switch: Connect the 2 cables of the wall switch converter to the ter-
minals that you marked on the light switch (any order, see illustration 3 and 4).
g) Put the light switch in place and fasten the screws.
h) Put the face plate in place and press to fasten.
i) Switch on the mains supply breaker.
Caution: Do not let the wall switch converter come into contact with the mains power
cables. Make sure that all cables are disconnected from your regular light switch be-
fore installing the wall switch converter.
3 | Installation Smartwares
8 SH8-90604_IM
3.4 Double switch installation
Illustration5: Mark position and re-
move cables
Illustration6: Connect power to
connection terminal
Illustration7: Connect switch con-
verter to the light switch
Follow the procedure below to install the wall switch converter on a double button
light switch.
Before you start, make sure that you have:
üSwitched off the mains supply breaker.
üMeasured that there is no power present, using a voltage meter.
üInstalled the battery in the wall switch converters. (See section “Install the switch
converter battery”.)
üPaired the light bulb with the wall switch converters. (See section “Pair light bulb
to switch converter”.)
a) On the light switch: Remove the switch face-plate. (See illustration 5)
b) Loosen and remove the screws holding the switch in place.
c) Mark the terminals where the cables are connected.
d) Remove the cables from the light switch.
e) Insert the cables into the connection terminals. (See illustration 6)
f) On the light switch: Connect the cables of the wall switch converter to the termin-
als that you marked on the light switch.
Important: Install as shown in illustration 7. Yellow cables on one side and white on
the other of the light switch. If white and yellow are mixed, damage to the unit may
occur.
g) Repeat step f) for the second wall switch converter.
h) Put the light switch in place and fasten the screws.
i) Put the face plate in place and press to fasten.
j) Switch on the mains supply breaker.
Caution: Do not let the wall switch converter come into contact with the mains power
cables. Make sure that all cables are disconnected from your regular light switch be-
fore installing the wall switch converter.
3.5 Hotel switch installation
Illustration8: Mark position and re-
move cables on switch 1
Follow the procedure below to install the wall switch converter on a single button
hotel switch.
Before you start, make sure that you have:
üSwitched off the mains supply breaker.
üMeasured that there is no power present, using a voltage meter.
üInstalled the battery in the wall switch converter. (See section “Install the switch
converter battery”.)
üPaired the light bulb with the wall switch converter. (See section “Pair light bulb to
switch converter”.)
a) On the light switch: Remove the switch face-plate. (See illustration 8)
b) Loosen and remove the screws holding the switch in place.
c) Mark the terminals where the cables are connected.
Smartwares Installation | 3
SH8-90604_IM 9
Illustration9: Connect power to
connection terminal on switch 1
Illustration10: Mark position and
remove cables on switch 2
Illustration11: Connect power to
connection terminal on switch 2
Illustration12: Connect switch con-
verter to the light switch (switch 1
&2)
d) Remove the cables from the light switch.
e) Insert the cables into the connection terminal. (see illustration 9 and 10)
f) On the light switch: Connect the cables of the wall switch converter to the termin-
als that you marked on the light switch (any order, see illustration 11 and 12).
g) Put the light switch in place and fasten the screws.
h) Put the face plate in place and press to fasten.
i) Repeat steps a-h to install the second switch.
j) Switch on the mains supply breaker.
Caution: Do not let the wall switch converter come into contact with the mains power
cables. Make sure that all cables are disconnected from your regular light switch be-
fore installing the wall switch converter.
4 | Controlling your lights Smartwares
10 SH8-90604_IM
4 Controlling your lights
You have now converted your regular wall switch to a smart switch. You can now fully
control your smart bulb with your existing wall switch, rather than just turning it on or
off.
4.1 HomeWizard App
When your wall switch convertor is connected to the Link gateway you can not only
use the HomeWizard App to control your bulbs, but you also have the following addi-
tional options:
– Adjust the toggle mode of your traditional wall switch;
– Create various scenes and activate them with your wall switch.
4.2 Manual operation
If you have paired the wall switch converter directly to the light bulb, the following
standard toggle mode is in use:
– Toggle your wall switch once to turn the connected bulbs on or off.
– Toggle your wall switch twice to switch between white and colour mode (only
works when you have coloured bulbs).
– Toggle your wall switch three times to dim the connected bulbs. Toggle the switch
once when you have reached the desired brightness.
– Toggle your wall switch four times to change the colour of the connected bulbs.
Toggle the switch once when you have reached the desired colour.
If you have multiple bulbs connected to your wall switch convertor in different states
(for example one is turned on, and another is turned off):
– Toggle your wall switch twice to synchronise all connected bulbs to the same
state.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Cambiar de Smartwares
Smartwares
Smartwares SH5-RPD-02A Manual de usuario
Smartwares
Smartwares SH5-RBU-04A Manual de usuario
Smartwares
Smartwares SH4-99566FR Manual de usuario
Smartwares
Smartwares SH4-90259 Manual de usuario
Smartwares
Smartwares SH5-RPS-36A Manual de usuario
Smartwares
Smartwares SH4-90268 Manual de usuario
Smartwares
Smartwares SH4-90261 Manual de usuario
Smartwares
Smartwares SH4-99559 Manual de usuario
Smartwares
Smartwares SH5-RPS-36A/FR Manual de usuario
Smartwares
Smartwares SH4-99558 Manual de usuario
Smartwares
Smartwares SH5-TSW-A Manual de usuario
Smartwares
Smartwares 10.037.07 Manual de usuario
Smartwares
Smartwares SH4-90451 Manual de usuario
Smartwares
Smartwares SH4-90160 Manual de usuario
Smartwares
Smartwares SH4-99573 Manual de usuario
Smartwares
Smartwares SH4-90260 Manual de usuario
Smartwares
Smartwares SH4-99751 Especificaciones técnicas
Smartwares
Smartwares 10.037.12 Manual de usuario
Smartwares
Smartwares SH4-99567 Manual de usuario
Smartwares
Smartwares SH4-90162 Manual de usuario
