MyPM03S
Meter for three-phase systems
User manual and data sheet
3
This symbol found on the product or its packaging indicates that this product must not be treated as common
household waste. All products marked with this symbol must be disposed of through appropriate collection
centers. Improper disposal could have negative consequences for the environment and for the safety of human
health. Recycling of materials helps to conserve natural resources. For more information, contact the Civic Office in your
area, the waste collection service or the center where you purchased the product.
Disclaimer
SmartDHOME Srl cannot guarantee that the information regarding the technical characteristics of the devices in this
document are correct. The product and its accessories are subject to constant checks aimed at improving them through
careful research and development analyses. We reserve the right to modify components, accessories, technical data
sheets and related product documentation at any time, without notice.
Intended use
This device has been designed for the monitoring of electricity consumption and the control of devices connected to
systems installed correctly in residential, commercial and industrial environments. Should it be improperly used and / or
modifications not authorized by our technical department, the company reserves the right to cancel the two-year warranty
and provide assistance upon payment of the service.
Description
MyPM03S is the ideal device for prepaid energy supply services (Pay per Use). It checks the electricity consumption data
of three-phase systems and is equipped with a disconnector that cuts the energy when the paid budget is reached.
Power Supply and fixing
MyPM03S does not need batteries to be powered, it is powered directly from the line to which it is connected. It attaches
easily, thanks to the 14-unit DIN bar.
ATTENTION! To switch off the device, it is necessary to remove the power supply for about 20 seconds.
Clear display
The display verifies in real time all readings and set parameters.
Constant reading
The data is read in real time and continuously; the transmission frequency can be set on the basis of the contractual NB-
IoT tariff plan (standard 1 transfer per 10 minutes).
Real-time management
At any time it is possible to remotely power and disconnect all the loads connected to the device; once this operation has
been carried out, a confirmation message will be notified.
