Smart series HT2024SS Manual de usuario
1
Save This Manual
Smart Series™
Wall Heater
Operations Manual
Models: HT2024SS 240V, 2000W
FSSWH2004 240V, 2000W
HT1502SS 120V, 1500W
FSSWH1502 120V, 1500W
2
Index
Features that are functional ........................................................................... pg. 3
Thermostat Display ....................................................................................... pg. 4
Functionality of touch screen buttons............................................................ pg. 5
Operating instructions.................................................................................... pg. 6
Initial setup instructions................................................................................. pg. 6
Setup day and time Procedure........................................................................ pg. 6
Homeowner setup instructions....................................................................... pg. 8
Automatic Mode - Factory Setting................................................................. pg. 8
Customize your settings................................................................................. pg. 9
Celsius or Fahrenheit indication .................................................................. pg. 12
Lockout feature ............................................................................................ pg. 12
Night light operation.................................................................................... pg. 13
Hold option or vacation mode...................................................................... pg. 14
Remote controller......................................................................................... pg. 14
Fan only operation (no heat)........................................................................ pg. 15
3
Touch Screen Control Board
OPERATIONS MANUAL
FEATURES THAT ARE FUNCTIONAL
1. 2” X 6” Electronic LED Display with blue backlight
- Easy to read, in the dark or lighted areas
2. Touch Screen surface with soft signal beeps
3. Fahrenheit or Celsius readout
4. 7 day (5 and 2) programmable settings, up to 4 settings per day
5. Manual or Preset automatic mode selection
6. Proportional temperature control
7. Power Memory Function (time and operating mode)
8. Lock-out feature
9. Night Light
10. Built-in Safety feature to alert status of the thermal safety limit
11. Vanishing display readout (only ON/OFF and MODE icons appear)
4
THERMOSTAT DISPLAY
Days of week
Group 1 (Mon to Fri)
Group 2 (Sat & Sun)
Time of day
This area is also used when pro-
gramming custom periods
Time Periods
1 = Wake up period
2 = Daytime period
3 = Evening Period
4 = Sleep Time
Ambient temperature
Tamper proof setting
Proportional heat control indicator
Night light indicator
Up icon
Mode icon
Down icon
Centigrade Setting
Fahrenheit Setting
Fan operation
Automatic Mode
Hold function
On / Off icon
5
FUNCTIONALITY OF TOUCH SCREEN ICONS (For Touch Screen only)
Note: The four icons (touch pads) shown below control the setting and operation
of the heater as indicated.
ON/OFF icon (in OFF position, this icon is orange and half the
brightness.
Setup parameter DOWN icon
Setup parameter UP icon
Functional MODE icon
Caution: It is not necessary to push/press the icons to work. They are sen-
sitive to touch, not pressure.
6
OPERATING INSTRUCTIONS
1. Whentheheatingunitisrstpoweredup,itwilldefaulttotheOFFposition.
The power ON /OFF icon in the lower left corner of the display will il-
luminate an orange color.
INITIAL SETUP INSTRUCTIONS (This setup is usually performed by the installer)
1. Touch ON /OFF icon located in the lower left corner of the display. The
Icon will illuminate a bright blue color, indicating the heater is ON.
Note: For all the following setup procedures, the display will automatically reset
after a 30 second pause. If this occurs, start back at step 1 of the setup proce-
dures.
SETUP DAY AND TIME PROCEDURE (This setup is usually performed by the installer)
1. Simultaneously touch and hold the UP Icon and DOWN Icon for 1.5
seconds. A beep will sound and the Day indicator at the top of the display
willash.
2. Using the UP Icon or DOWN Icon adjust to appropriate DAY of
week.
7
SETUP DAY AND TIME PROCEDURE (This setup is usually performed by the installer)
3. TouchtheMODEicon.AM/PMindicatorwillash.UsetheUP Icon
and DOWN Icon to set appropriate time. AM / PM will change automati-
cally once you pass 12:00.
4. TouchtheMODEicon.MINUTESwillash.UsetheUP Icon and
DOWN Icon to set MINUTES to the appropriate time.
5. To lock in your settings, touch the MODE icon.
Note: If this setup is performed by the installer, power down the display unit by
touching the power ON / OFF icon if no other programming will be done at
this time.
8
HOMEOWNER SETUP INSTRUCTIONS
1. The digital display has default settings for the “Automatic Mode”. See de-
fault settings below. If these settings are satisfactory please skip to the next
programming option, Celsius and Fahrenheit (page 12). If not, follow the
steps below for “Customized Settings”.
AUTOMATIC MODE --- FACTORY SETTINGS
PERIOD TIME SETPOINT
Wake-UP 6:00 AM 70ºF (21ºC)
Daytime 8:00 AM 62ºF (17ºC)
Evening 6:00 PM 70ºF (21ºC)
Sleep Time 10:00 PM 62ºF (17ºC)
9
CUSTOMIZE YOUR SETTINGS
Note: You can customize ON and OFF times and temperature for two catagories,
Weekdays (MON - FRI) and Weekends (SAT & SUN). Each category has 4 set-
tings.
Wake-Up Daytime Evening Sleep Time.
Please set a start time and temperature for each period.
1. To start setup, simultaneously touch and hold the ON / OFF icon and
MODE icon for 1.5 seconds. MON through FRI will illuminate at the
top of the display with the hour and Period 1. This is your wake-up time.
2. Touch MODE icon to start programming the HOURS for Period 1 (Mon-
day through Friday). Touch either the UP Icon or the Down Icon to
set START time in hours.
3. Touch MODE icon again to start programming the MINUTES for Period
1. (Wakeup) Touch either the UP Icon or the DOWN Icon to set Min-
utes.
CUSTOMIZ
10
CUSTOMIZE YOUR SETTINGS
4. Touch MODE icon again to start programming the “Set Temperature
Setting”(Wake Up). Touch UP Icon or the Down Icon to set tempera-
ture for Wake Up.
5. Touch MODE icon to start programming the HOURS for Period 2 (Day-
time Period). Touch either the UP Icon or the DOWN Icon to set
START time in hours.
6. Touch MODE icon again to start programming the MINUTES for Period
2 (Daytime). Touch either the UP Icon or the DOWN Icon to set
MINUTES.
7. Touch MODE icon again to start programming the “Set Temperature Set-
ting” (Day Time). Touch UP Icon or the DOWN Icon to set TEM-
PERATURE. for day time.
8. Touch MODE icon to start programming the HOURS for Period 3 (Eve-
ning Period). Touch either the UP Icon or the DOWN Icon to set
START time in hours.
9. Touch MODE icon again to start programming the MINUTES for Period
3 (Evening). Touch either the UP Icon or the DOWN Icon to set
MINUTES.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Manuales populares de Calentador de otras marcas
Empire Heating Systems
Empire Heating Systems WCC65 Manual de usuario
Wetekom
Wetekom 92 86 43 Manual de usuario
Desa
Desa SPC170-F Manual de usuario
Watlow
Watlow Watrod Electric Tubular Heaters Manual de usuario
Haverland
Haverland ECO-DRY GPS Series Manual de lista de piezas
Stelpro
Stelpro ASILVC2060 Series Manual de usuario