Page6 https://www.smart-material.com
HVA 1500/50 User Manual V2.0
This section provides information for incoming inspection, damage claims,
shipping, and installation of the HVA1500/50.
3.1 What comes with thE HVA1500/50
The HVA1500/50 package contains the following items:
• Single channel high voltage amplier unit HVA 1500/50,
• Line voltage cord,
• High voltage cable with an SHV plug,
• 3-pin interlock connector,
• User Manual.
3.2 incoming inspection
The high voltage amplier unit should be inspected for damage, scratches,
dents, or other defects. Also the cushioning materials should be checked
for sign of severe stress. The electrical performance of the amplier unit
should be veried upon receipt. Make sure that no cable is electrically
and mechanically defective. If the unit is damaged in transit, or fails to
meet the specications upon receipt, notify the carrier and the sales oce
immediately. Retain the shipping carton and padding material for the
carrier’s inspection. The sales oce will arrange for replacement or repair
of your unit without waiting for claim settlement against the carrier. Before
returning the high voltage amplier for any reason, notify the sales oce of
the diculty encountered. They will send shipping instructions.
3.3 INSTALLation
The AC power supplied to the amplier unit should be 90 to 264 VAC, 47 to
63Hz, single phase. Two 2-ampere slow blow fuses of 1.6A are used.
For safety reasons, the power supply must be grounded through the AC
power cord. When operating from ungrounded power sources, a secondary
grounding method is mandatory. Before operation, make sure that the
output cable of the amplier unit is connected to the load.
The cooling of the control unit is provided by convection. The location of the
unit must ensure adequate air circulation.
3. INSPECtion & Installation
