smart home SH-S8 Manual de usuario
USER GUIDE
URINAL SENSOR FLUSH VALVE
Model: SH - S8
Bkav SmartHome technology company limited
www.smarthome.bkav.com
All rights reserved.
Copyright © 2015 Bkav SmartHome Co., Ltd.
UGS8/V2.3/0815
893604393UGS8Mfr Code:
USER GUIDE
URINAL SENSOR FLUSH VALVE
SH - S8
Bkav SmartHome technology company limited
1
Usage notice
Thank you for choosing urinal sensor valve SH - S8 of Bkav
SmartHome. By selecting Bkav SmartHome’s products, you
will get the best warranty service and installation support
from our technicians.
This document gives useful information during installation
and usage time. You should read and keep the manual care-
fully in case of need.
Electric shock may cause injuries or threats to
life. Before installing, repairing or cleaning the
device, you should check whether the device’s
power is disconnected.
This work should be done by technicians or
Customer Contact Center to avoid electric
related accidents.
Environmental regulations must be complied
when discarding or recycling the device or its
wrapping.
Warning
Copyright © 2015 Bkav SmartHome Co., Ltd.
All rights reserved.
The urinal sensor flush valve SH - S8 is the product of Bkav
SmartHome and has been registered regarding design,
utility solutions and quality certification. All violations such as
copies of design and product idea are subject to the current
copyright law of the Socialist Republic of Vietnam.
2Safety instruction
Safety instruction should be complied during the
device usage.
Do not leave the device in high-temperature
environment.
Do not disassemble the device if not necessary.
Disconnect the device’s battery prior to any
installation, disassembly or repair.
Do not clean the device with corrosive chemicals.
0
C
6V Alkaline
Do not use voltage which is different from the one
stated in the device’s specifications.
Warning
3
Table of contents
1
2
3
4
4
4
6
7
7
8
8
9
13
13
14
15
15
17
17
17
18
18
19
20
Usage notice
Safety instruction
Table of contents
Introduction
General introduction
Product package
Specifications
Device components
Sensing range
Installation instruction
Installation dimensions
Installation steps
Usage and maintenance
Usage steps
Maintenance
Operation cycle
Cycle explanation
Problem and Solution
Problem 1
Problem 2
Problem 3
Problem 4
Problem 5
Contact
4Introduction
General introduction
SH - S8
Product package
User guide (book)
The urinal sensor flush valve SH - S8 uses infrared sensor
technology. When a user is in the sensor area, the device will
flush water automatically to clean a urinal. The automatic
feature of the device brings comfort, water saving and abso-
lute safety for users.
With the modern and luxurious design, the device is suitable
for hotels, trade centers, airports, train stations, public
restrooms, etc.
USER GUIDE
URINAL SENSOR FLUSH VALVE
Model: SH - S8
Bkav SmartHome technology company limited
5
4 sets of screws and anchors
Notice
Please check to ensure that all accessories
are attached to the device. If there is any
missing accessory, please contact the shop
from which you purchased.
1 set of pipe fittings
1 battery box
(6V - 4 AA Alkaline Batteries)
1 solenoid valve - 6V
6
Specifications
6V - 4 Pin AA Alkaline Battery
Voltage
Water consumption
Sensing range The device can detect person within
default sensing range of 45cm
(adjustable, from 30 - 80 cm).
Water supply pressure 0.7 - 7.6 Kgf/cm2
Clean flush time 8 seconds
Automatic wet flush time 12 hours
Water temperature 50C - 500C
Used water Clean water without sediment
Dimensions
Operating temperature 600C max
103 x 162 x 82 mm
Weight 0.8 kg
Chú thích
2 years with 100 usage times/day (*)Lifespan
2 ~ 3 liters/time
3 secondsWet flush time
(*) The period of using the device can be short-
er or longer depending on the usage conditions
and environment. The period above is tested in
standard conditions.
Note
Device components
Sensing range
Effective range for receiving
reflected signal
Effective range for
transmitting infrared signal
450 mm
250 mm
350 mm
15o
82 mm
Indicator light:
Has notification
function, when the
light flashes it
means that the
device is detecting
a user in its
sensor area.
Transmits and
receives the
reflected infrared
signal from users
in the sensor
area, then sends
notification to the
central processor.
Infrared sensing
component:
7
The sensing range can be adjusted from 30
cm - 80 cm, depending on installation conditions
and user demands.
Note
Tabla de contenidos
Otros manuales de Unidad de control de smart home
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
