Smanos K1 Manual de usuario
K1/K2
SMARTHOME DIY KIT
QUICK GUIDE
EN DE FR NL ES PT IT PL
EN
Thank you for choosing smanos help you take control of your home. The
smanos family of Home Alarm Systems are designed to be self-monitored
alarm systems and help you become more active in securing your home
without a high investment. We aim to provide a safe, easy & cost effective
solution for you to protect your home & loved ones 24/7/365.
High-speed WiFi Internet Connection
- One critical factor that can affect the performance of your device is the
position between your home WiFi router and the K1/K2 Hub. Set up your
K1/K2 Hub in an open space (DO NOT place it directly on the oor); the
closer the K1/K2 Hub is to the router, the stronger the WiFi signal will be.
- Please be sure to connect you K1/K2 Hub to WiFi using the 2.4GHz
spectrum as this is a larger spectrum and the K1/K2 Hub does not support
the 5GHz option which has been found to be the most common mistake
when setting up the K1/K2 for the rst time.
Operating System Requirements
- iOS 9.0 or above with iPhone 5 or above;
- Android 5.0 or above
EN
How the K1/K2 System Works
Through the Keypad, put the
system in Arm Mode
(Please refer to System Statuses to
see how)
Through the
“smanos home”
app, put the system
in Arm Mode
(Please refer to
System Statuses to
see how)
When K1/K2 Hub has been set to Arm
Mode (The red indicator is on)
When Door/
Window Sensor
detects door/
window opening, it
sends signal to K1/
K2 Hub
K1/K2 sends signal
to sound Indoor
Siren at 104dB on-
site
K1/K2 sends push
notication to your
phone
When Motion
Sensor detects
motion it sends
signal to K1/K2
Hub
EN
Included in Your K1/K2 Smart Home System
The accessories in this kit are already paired with your K1/K2 Smart Hub.
K1/K2 Smart Hub x 1
- The heart of the system that receives, processes
and sends signals from & to the wireless
sensors.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while
ignoring motion from your furry little ones
under 50 lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 104dB
siren sound, to deter any would-be intruder
after a sensor has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password
customizable directly on the app) that can be
used to control the entire system.
EN
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a
door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1/K2 Hub and
wireless accessories (with corresponding model
numbers on them.)
K1/K2 Hub Power Adapter Screw set for the Hub/Motion/Siren/Keypad
(optional – double sided tape can also be
used & is included)
Double Sided Tape for the
Hub/Motion/Siren/Keypad
Double Sided Tape for the
Door/Window Sensor
Corner Mounting Bracket
for the Motion Sensor
EN
Devices Overview
K1/K2 Hub Rear View
LED Indicator
Speaker
Pin
Pairing Button
Power Port
Tamper Switch*
WiFi Button
Power ON/OFF
* Anti-tampering protection ensures that any attempts to move the device results in an alarm
and push notication.
MD-20 Motion Sensor Rear View
LED Indicator
Tamper Switch
EN
DS-20 Door/Window Sensor Overview
Front View Rear View Inside View
Tamper
Switch
LED Indicator Slide to Open
SS-20 Indoor Siren Rear View
LED Indicator
Tamper Switch
EN
KP-20 Keypad Overview
Front View Rear View
UP ↑
LED Indicators
Four Non-numeric Keys*
UP ↑
LED
Indicators
Tamper
Switch
*Non-numberic Keys are used to set the password for changing the status of
K1/K2 system.
The default password is pressing the key at the left top for 6 times. Make
sure the UP mark on the back cover points up before putting the Keypad on
a at surface.
Reload the Batteries of Accessories
EN
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a at surface
rst. Check all options and how to set it up properly. Then install them on
their assigned places.
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan
the QR codes as below:
Sign Up/In
If you have not registered an account with smanos, please press “Sign up”
just below the “Sign in” icon on the app, and follow the instructions to create
your account rst.
If you do not receive an account verication code in your email inbox
during the registration process, please remember to check your spam/
junk folder and make sure the notice has not been blocked by your service
provider.
EN
System Statuses
System Armed
All the K1/K2 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Press the
icon
System
Armed
APP Operating
Step
K1/K2 Hub
Indicator
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can
be changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor yet your door/
window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps
Rotate the Keypad ring to the right rst, then to the left, and
then enter the Keypad password (Press the left top key for 6
times).
Press the
icon
System in
Home Mode
APP Operating
Step
K1/K2 Hub
Indicator
Otros manuales para K1
4
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Automatización del hogar de Smanos
