SYSTEM OVERVIEW
98
SYSTEM OVERVIEW
1. ：When enabled, the system will announce the system status when armed or Arm Beep
disarmed.
2. ：The system will lock the keypad if no operation during 30 seconds onKeypad Lock
Home Sreen. To enable the keypad, you must enter the valid User Password.
3. ：If disabled, display backlight turn off after 30 seconds if no operation on HomeBacklight
Sreen.
4. ：If enabled, the system will generate a Exit Alarm Warning Door/Window Open Warnings
notification when you leaving a door or window open after the exit delay expires.
5. ：used for keypad unlocking and SMS remote settings.System Password
6. ：user for keypad unlocking, SMS Remote Control and Alarm text User Password
notification prefix Setting.
7. ：Voice Announcement, Displaying and SMS notification will be in the selected Language
language. After selecting the desired language, the panel will reset.
8. ：If the factor y default configuration is loaded, any data that has already Initialization
been programmed into the system will be changed into the Factory Default
Configuration!
Description
Set up
The First Usage
With the built-in WiFi Communications module, if your system is equipped to
report alarms and Remote Access via Mobile APP over the internet, your router must
remain powered-on at all times, and a WiFi internet connection is required.
With the built-in GSM/3G Communications module, if your system is equipped to
report alarms and Remote control via SMS or Voice Dialling, to ensure the SIM card is
installed (refer to the diagram below ) and the panel must be connected to the
GSM/3G Cellular or to the Internet.
AC Power Connections - Connect the Power Supply to the DC 5V receptacle, and push
the backup battery switch to “ON”.
Setting Phone Numbers
Up to 5 User Phone Numbers used to receive the Alarm SMS notification and Audio Alarm
Verification.
RFID Pairing, Delete or Delete All the RFID tags
Pairing a new Wireless Key, Sensor or RFID tag
Delete/Edit Delete a Wireless Key or RFID tag from the list
Edit/Delete a wireless sensor from the list
Delete All Delete all the Wireless Key, Sensors or RFID tags
Duration Used to set Record Duration
( unit: second, 1-20 is available )
Used to display the firmware and MAC address of the WiFi module,
the firmware and IMEI of the GSM module and Serial Number of panel
Enable/Disable using the WiFi
network-provided time
Enable/Disable using the cellular
network-provided time
Add
Wi-Fi Sync
2G/3G Sync
Pairing, Edit, Delete or Delete All
the wireless sensors
MAC/IP Used to display the MAC and IP
addresses of the WiFi module
reser ved
Date&Time Set the time and date
Enable
Enable
+08:00
20seconds
Null
Eol Zone
Socket
Used to set the Zone(EOLR) Name, Type
Pairing with the wireless switch
Pairing with the wireless switch
!
Phone
1 Phone
2 Phone
3 Phone
Used to set the first Phone Number, Enable
/Disable Dialling and Enable/Disable SMS
Used to set the second Phone Number, Enable
/Disable Dialling and Enable/Disable SMS
Used to set the third Phone Number, Enable
/Disable Dialling and Enable/Disable SMS
Used to set the fouth Phone Number, Enable
/Disable Dialling and Enable/Disable SMS
4 Phone
Used to set the fifth Phone Number, Enable
/Disable Dialling and Enable/Disable SMS
5 Phone
Log
Alarm Log Used to view system alarm events.
Arm Log Used to view system arm/disarm events.
Remote Pairing, Delete or Delete All the wireless keys
Detector
Used to sends a transmission signal
to the wireless siren be paired.
Siren Learn
Wi-Fi
Alarm Socket
Airlink WiFi configuration (Requires the mobile APP).
Unbind Unbind the Panel link from the server
Record Message Recording and Playback
Play Used to listen to the recorded message
Delete Used to delete the recorded message
Arm Timer Used to set a daily time to arm automatically,
and Enable/Disable automation
Disarm Timer Used to set a daily time to disarm automatically,
and Enable/Disable automation
Disarm Timer
Timer
Record
Parts
Main Menu
st
nd
rd
th
th
Version
