SkyLink UR-100 Manual de usuario
Installation for the Universal Receiver UR-100
1. Plug in the UR-100 into an electrical outlet inside the
garage.
2. Connect a wire (included with the UR-100 kit) from the
UR-100 to the existing garage door push button.
3. Set the DIP switches of both the Skylink transmitter
and UR-100 so that their DIP settings match each other
in order for them to communicate properly.
4. Refer to the UR-100 user's instruction, set the operation
frequency and/or brand jumper setting for the Skylink
transmitter.
5. All Done!
Tabla de contenidos
Otros manuales de Receptor de SkyLink
SkyLink
SkyLink MR3R Manual de usuario
SkyLink
SkyLink R4G Manual de usuario
SkyLink
SkyLink SW-18R Manual de usuario
SkyLink
SkyLink Household Alert GM-318R Manual de usuario
SkyLink
SkyLink MZ-52 Manual de usuario
SkyLink
SkyLink 18R Manual de usuario
SkyLink
SkyLink 318R Manual de usuario
SkyLink
SkyLink MZ-104 Manual de usuario
SkyLink
SkyLink SkylinkHome Smart Button GB-434 Manual de usuario
SkyLink
SkyLink Household Alert GM-433R Manual
