Skil SD561201 Manual de usuario
4V Rechargeable Screwdriver with
Circuit SensorTM Technology
Tournevis rechargeable de 4V doté de
la technologie Circuit SensorTM
Destornillador recargable de 4V con
tecnología Circuit SensorTM
1-877-SKIL-999 OR www.skiltools.com
Model/ Modelo/ Modèle: #SD561201
WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
For Customer Service
Pour le service à la clientèle
Servicio al cliente
2
TABLE OF CONTENTS
General Power Tool Safety Warnings .............................3-5
Safety Warnings for Screwdriver...................................5
Specic Safety Warnings for Approved CIRCUIT
SENSORTM Technology ...........................................5
Additional Safety Warnings .......................................6
Symbols ....................................................7-10
Get to Know Your Screwdriver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Packing List ..................................................12
Specications .................................................12
Operating Instructions .......................................13-17
Maintenance...................................................18
Troubleshooting ...............................................19
Limited Warranty for SKIL Cordless Tool ...........................20
3
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings, instructions, illustrations and specications
provided with this power tool. Failure to follow all instructions listed
below may result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed
or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for
appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or energising power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
4
Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent
and ignore tool safety principles. A careless action can cause severe injury within a fraction
of a second.
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if
detachable, from the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the
power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
Battery tool use and care
Recharge only with the charger specied by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of re when used with another battery pack.
Use power tools only with specically designated battery packs. Use of any other battery
packs may create a risk of injury and re.
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals together may cause burns or a
re.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modied. Damaged or modied
batteries may exhibit unpredictable behaviour resulting in re, explosion or risk of injury.
Do not expose a battery pack or tool to re or excessive temperature. Exposure to re or
temperature above 265 °F may cause explosion.
5
Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specied in the instructions. Charging improperly or at temperatures
outside the specied range may damage the battery and increase the risk of re.
Service
Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed
by the manufacturer or authorized service providers.
SAFETY WARNINGS FOR SCREWDRIVER
Hold the power tool by insulated gripping surfaces, when performing an operation
where the fastener may contact hidden wiring or its own cord. Fasteners contacting a “live”
wire may make exposed metal parts of the power tool “live” and could give the operator an
electric shock.
SPECIFIC SAFETY WARNINGS FOR APPROVED CIRCUIT
SENSORTM TECHNOLOGY
Never insert the screwdriver bit into a power outlet to detect the circuit. Failure to obey this
warning could cause electric shock and other serious personal injury. Do not use the tool to
detect AC circuit in uninsulated, exposed or free wires.
Do not use the tool as a substitute for a voltmeter.
The approved Circuit SensorTM Technology is designed to help locate live wires operating at
mains voltage (100-230V AC); never use it to detect other types of current. Failure to obey this
could cause serious personal injury and damage the tool.
Be aware that this tool is not designed to detect circuits behind wall board, plaster, paneling,
etc.
Use this tool to detect complete circuits in wall switches, electrical outlets, power cords and
extension cords.
The following conditions can cause inaccurate results:
— Low battery
— Shielded cables
Before use, always test the tool by detecting a known circuit.
If in doubt contact a qualied contractor.
WARNING This tool will not detect wires in circuits isolated from the mains
supply, cables operating at direct current (DC) or wires used for
telecommunication or computer systems. Hidden wires may not be detected.
6
ADDITIONAL SAFETY WARNINGS
WARNING
• Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
–Lead from lead-based paints.
–Crystalline silica from bricks, cement, and other masonry products.
–Arsenic and chromium from chemically-treated lumber.
• Your risk from these exposures varies, depending upon how often you do this type of work.
To reduce your exposure to these chemicals:
–Work in a well-ventilated area.
–Work with approved safety equipment, such as dust masks that are specially designed to
lter out microscopic particles.
–Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth or eyes or to lie on the skin may promote
absorption of harmful chemicals.
WARNING Before attempting to use the tool, familiarize yourself with all of its
operating features and safety requirements.
7
SYMBOLS
Safety Symbols
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols and the explanations with them deserve your careful attention and understanding.
The symbol warnings do not, by themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident prevention measures.
WARNING Be sure to read and understand all safety instructions in this Owner’s
Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below may
result in electric shock, re, and/or serious personal injury.
The denitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, will result in minor or moderate injury.
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could lead to equipment
or other property damage if they are not followed. Each message is preceded by the word
“NOTICE”, as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not followed.
WARNING The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full face
shield when needed. We recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields. Always use
eye protection which is marked to comply with ANSI Z87.1.
8
SYMBOLS (CONTINUED)
IMPORTANT: Some of the following symbols may be used on your tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and more safely.
Symbol Name Designation / Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Wh Watt-hours Battery capacity
Ah Ampere-Hours Battery capacity
Diameter Size of drill bits, grinding wheels, etc.
No load speed Rotational speed, at no load
n Rated speed Maximum attainable speed
.../min
Revolutions or
reciprocation per
minute
Revolutions, strokes, surface speed, orbits etc. per
minute
Circuit Sensor
button Depress this button to activate the Circuit Sensor function
Forward/Reverse
Arrow Indicators Shows the rotation direction
0 Off position Zero speed, zero torque...
1, 2, 3, ...
I, II, III, Selector settings Speed, torque or position settings. Higher number means
greater speed
Innitely variable
selector with off Speed is increasing from 0 setting
Arrow Action in the direction of arrow
9
Symbol Name Designation / Explanation
Alternating current Type or a characteristic of current
Direct current Type or a characteristic of current
Alternating or direct
current Type or a characteristic of current
Class II
construction Designates Double Insulated Construction tools.
Earthing terminal Grounding terminal
Li-ion RBRC seal Designates Li-ion battery recycling program
Ni-Cad RBRC seal Designates Ni-Cad battery recycling program
Read manual
symbol Alerts user to read manual
Wear eye
protection symbol Alerts user to wear eye protection
10
SYMBOLS (CERTIFICATION INFORMATION)
IMPORTANT: Some of the following symbols for certication information may be used on your
tool. Please study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and more safely.
Symbol Designation / Explanation
This symbol designates that this tool is listed by Underwriters Laboratories.
This symbol designates that this tool is recognized by Underwriters
Laboratories.
This symbol designates that this tool is listed by Underwriters Laboratories,
to United States and Canadian Standards.
This symbol designates that this tool is listed by the Canadian Standards
Association.
This symbol designates that this tool is listed by the Canadian Standards
Association, to United States and Canadian Standards.
This symbol designates that this tool is listed by the Intertek Testing
Services, to United States and Canadian Standards.
This symbol designates that this tool complies to NOM Mexican Standards.
BC
This symbol designates that this tool is listed by the California Energy
Commission.
Tabla de contenidos
Idiomas:
Otros manuales de Destornillador eléctrico de Skil
Skil
Skil 2148 Manual de usuario
Skil
Skil 2472 Manual de usuario
Skil
Skil 2348 Manual de usuario
Skil
Skil 2436 Manual de usuario
Skil
Skil SD561802E Manual de usuario
Skil
Skil 2695 Manual de usuario
Skil
Skil 1011 Manual de usuario
Skil
Skil 2336 Instrucciones de montaje
Skil
Skil SD561802 Manual de usuario
Skil
Skil 2710 Manual de usuario
Skil
Skil SD1 2710 Series Manual de usuario
Skil
Skil 2236 Manual de usuario
Skil
Skil 1008 Manual de usuario
Skil
Skil 2466 Manual de usuario
Skil
Skil 3080 Manual de usuario
Skil
Skil 2536 Manual de usuario
Skil
Skil 2346 Instrucciones de montaje
Skil
Skil 2936 Instrucciones de montaje
Skil
Skil 2636 Manual de usuario
Skil
Skil 2636 Manual de usuario
