Skil 2354 Instrucciones de montaje

2354

1619X05087 05/12

IMPORTANT: Read Before Using

Operating/ afety

Instructions

Call Toll Free for Consumer

Information & ervice Locations

1-877- KIL999 (1-877-754-5999)

www.skil.com

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 1

Read all safety warnings

and all instructions. Failure

to follow the warnings and instructions may

result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND

INSTRUCTIONS FOR FUTURE

REFERENCE

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use

General Power Tool Safety

Warnings

WARNING

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 2

any adapter plugs with earthed (grounded)

power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or

grounded.

Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

If operating the power tool in a damp location is

unavoidable, use a Ground Fault Circuit

Interrupter (GFCI) protected supply. Use of an

GFCI reduce the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 3

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and / or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energizing

power tools that have the switch on invites

accidents.

Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

Do not overreach. Keep proper footing and

balance at all times. This enables better

control of the power tool in unexpected

situations.

Dress properly. Do not wear loose clothing or

jewelry. Keep your hair, clothing and gloves

away from moving parts. Loose clothes,

jewelry or long hair can be caught in moving

parts.

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 4

If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

Power tool use and care

Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

Do not use the power tool if the switch does

not turn it on and off. Any power tool that

cannot be controlled with the switch is

dangerous and must be repaired.

Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts

and any other condition that may affect the

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 5

power tool’s operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

Use the power tool, accessories and tool bits

etc. in accordance with these instructions, taking

into account the working conditions and the

work to be performed. Use of the power tool

for operations different from those intended

could result in a hazardous situation.

Battery tool use and care

Recharge only with the charger specified by

the manufacturer. A charger that is suitable

for one type of battery pack may create a risk

of fire when used with another battery pack.

Use power tools only with specifically

designated battery packs. Use of any other

battery packs may create a risk of injury and

fire.

When battery pack is not in use, keep it

away from other metal objects like paper

clips, coins, keys, nails, screws, or other

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 6

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

Under abusive conditions, liquid may be

ejected from the battery, avoid contact. If

contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

Service

Have your power tool serviced by a qualified

repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 7

Use auxiliary handle(s) if supplied with the

tool. Loss of control can cause personal injury.

Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring. Cutting accessory contacting a

"live" wire may make exposed metal parts of the

power tool "live" and could give the operator an

electric shock.

Use clamps or another practical way to secure

and support the workpiece to a stable

platform. Holding the work by hand or against

your body leaves it unstable and may lead to

loss of control.

Do not drill, fasten or break into existing

walls or other blind areas where electrical

wiring may exist. If this situation is

unavoidable, disconnect all fuses or circuit

breakers feeding this worksite.

Battery tools are always in an operative

condition. Be aware of the possible hazards.

Always wear safety goggles or eye

protection when using this tool.

Secure the workpiece, never hold it in your

hand or across legs. The drilling action may

cause you to lose control of the

workpiece and injury may occur.

SAFETY RULES FOR CORDLESS

SCREWDRIVERS

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 8

When installing a bit, insert the shank of the bit

well within the collet. If the bit is not inserted

deep enough, the grip of the collet over the bit is

reduced and the loss of control is increased.

Do not run the tool while carrying it at your

side. A spinning bit could become entangled

with clothing and injury may result.

Do not use dull or damaged bits and

accessories. Dull or damaged bits have a

greater tendency to bind in the workpiece.

Some dust created by

power sanding, sawing,

grinding, drilling, and other construction

activities contains chemicals known to

cause cancer, birth defects or other

reproductive harm. Some examples of

these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement

and other masonry products, and

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type of

work. To reduce your exposure to these

chemicals: work in a well ventilated area, and

work with approved safety equipment, such

as those dust masks that are specially

designed to filter out microscopic particles.

WARNING

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 9

Battery/Charger

Before using battery charger, read all

instructions and cautionary markings on (1)

battery charger, (2) battery pack, and (3)

product using battery.

Do not disassemble charger or operate the

charger if it has received a sharp blow, been

dropped or otherwise damaged in any way.

Replace damaged cord or plugs

immediately. Incorrect reassembly or

damage may result in electric shock or fire.

Do not recharge battery in damp or wet

environment. Do not expose charger to rain

or snow. If battery case is cracked or

otherwise damaged, do not insert into

charger. Battery short or fire may result.

Charge battery pack in temperatures above

+32 degrees F (0 degrees C) and below +113

degrees F (45 degrees C). Store tool and

battery pack in locations where

temperatures will not exceed 120 degrees F

(49 degrees C). This is important to

prevent serious damage to the battery cells.

Place charger on flat non-flammable

surfaces and away from flammable

materials when re-charging battery pack.

The charger and battery pack heat during

charging. Carpeting and other heat insulating

surfaces block proper air circulation which

may cause overheating of the charger and

battery pack. If smoke or melting of the case

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12 6:59 AM Page 10

Otros manuales para 2354

Tabla de contenidos

Idiomas:

Manuales populares de Destornillador eléctrico de otras marcas

Makita

Makita DFT085F Manual de usuario

Parkside

Parkside 345138 2004 Manual de usuario

Makita

Makita DFL650F Manual de usuario

AEG

AEG BST 18BLX2-0 Manual de usuario

Ingersoll-Rand

Ingersoll-Rand D5000 Series Manual de usuario

BGS technic

BGS technic 956 Manual de usuario

Hilti

Hilti SD 6000 Manual de usuario

Parkside

Parkside PEPS 3 A1 Manual de usuario

Festool

Festool TI 15 Manual de usuario

Makita

Makita DWT190 Manual de usuario

Matatakitoyo Torque Tools

Matatakitoyo Torque Tools MTD Manual de usuario

DeWalt

DeWalt XR LI-ION DCD931 Manual de usuario

Festool

Festool DWC 18-2500 Manual de usuario

EINHELL

EINHELL TE-CD 12/1 Li Series Manual de usuario

Makita

Makita BFT043F Manual de usuario

Stanley

Stanley SCD2 Manual de usuario

Atlas Copco

Atlas Copco LUM12 SR Hoja de instrucciones

FAR

FAR TECNUM Manual de uso y cuidado