pressed down, for greater control when blending, e.g. when chopping
nuts or chocolates, or crushing ice.
7 Setting 1 and 2 will provide continuous blending until the control knob is
turned to the ‘0’ position.
8 You can add further ingredients while blending. For this, remove the
measuring cup from the pouring hole.
9 After you have completed blending, turn the control knob to the ‘0’
position.
SafetyLockingSystem
With safety in mind, this blender was designed with a safety locking system.
Unless the lid and blending jug are positioned correctly and locked in place,
the blender will not operate.
For correctly assembling the blender, operate as follows:
1. Place the main body on the table, with the front facing toward you.
2. Place the blending jug onto the main body with the handle to the right.
The jug is placed correctly when the arrow on the jug is positioned right
above the open lock on the motor base.
3. Turn the blending jug to the right until you hear a slight click. The arrows
on the motor base and blending jug should now be aligned with each
other. If this is the case, the blending jug is locked correctly.
4. Position the lid onto the blender so that the long holding lip is facing
toward you.
5. Turn this holding lip to the right, so that is it positioned right on top of the
jug handle. Now the blender is ready for use.
