Sitecom WL-607 Manual de usuario

WL-600/607

Wireless Broadband Router

(802.11bg)

All manuals and user guides at all-guides.com

all-guides.com

Introduction

Congratulations on purchasing this Wireless Broadband Router. This Wireless

Broadband Router is a cost-effective P Sharing Router that enables multiple users to

share the nternet through an ADSL or cable modem. Simply configure your nternet

connection settings in the Wireless Broadband Router and plug your PC to the LAN

port and you're ready to share files and access the nternet. As your network grows,

you can connect another hub or switch to the router’s LAN ports, allowing you to

easily expand your network. The Wireless Broadband Router is embedded with a

EEE 802.11g/b access point that allows you to build up a wireless LAN. The Wireless

Broadband Router provides a total solution for the Small and Medium-sized Business

(SMB) and the Small Office/Home Office (SOHO) markets, giving you an instant

network today, and the flexibility to handle tomorrow's expansion and speed.

Features

• High nternet Access throughput (50M)

• Allow multiple users to share a single nternet line

• Supports up to 253 users

• nternet Access via Cable or xDSL modem

• Access Private LAN Servers from the Public Network

• Equipped with four LAN ports (10/100M) and one WAN port (10/100M)

• Provides EEE 802.11g/b wireless LAN access point

• Support DHCP (Server/Client) for easy setup

• Support advance features such as: Special Applications, DMZ, Virtual Servers,

Access Control, Firewall.

• Allow you to monitor the router’s status such as: DHCP Client Log, System

Log, Security Log and Device/Connection Status

• Easy to use Web-based GU for configuration and management purposes

•

Remote Management allows configuration and upgrades from a remote site

(over the nternet)

Minimum Requirements

• One External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45)

• Network nterface Card (N C) for each Personal Computer (PC)

•

PCs with a Web-Browser ( nternet Explorer 4.0 or higher, or Netscape

Navigator 4.7 or higher)

Package Content

• One 4-port Broadband router unit

• One Quick nstallation Guide

• One User Manual CD

• One Power Adapter

•

Accessories

Note

The WAN “idle timeout” auto-disconnect function may not work due to abnormal

activities of some network application software, computer virus or hacker attacks

from the nternet. For example, some software sends network packets to the

nternet in the background, even when you are not using the nternet. So please

turn off your computer when you are not using it. This function also may not work

with some SP. So please make sure this function can work properly when you use

this function in the first time, especially your SP charge you by time used.

All manuals and user guides at all-guides.com

Get to know the Broadband Router

Back Panel

The diagram (fig1.0) below shows the broadband router’s back panel. The router’s

back panel is divided into three sections, LAN, WAN and Reset:

Figure 1.0

1) Local Area Network (LAN)

The Broadband router’s 4 LAN ports are where you connect your LAN’s PCs, printer

servers, hubs and switches etc.

2) Wide Area Network (WAN)

The WAN port is the segment connected to your xDSL or Cable modem and is

linked to the nternet.

3) Reset

The Reset button allows you to do one of two things.

1) f problems occur with your router, press the router’s reset button with a

pencil tip (for less than 4 seconds) and the router will re-boot itself,

keeping your original configurations.

f problems persist or you experience extreme problems or you forgot

your password, press the reset button for longer than 4 seconds and the

router will reset itself to the factory default settings (warning: your

original configurations will be replaced with the factory default settings)

All manuals and user guides at all-guides.com

Front Panel

On the router’s front panel there are LED lights that inform you of the router’s current status.

Below is an e planation of each LED and its description.

LED Light Status: Description

PWR

ON: Router’s power supply is on

WAN 10/100M

ON: WAN port 100Mbps is connected

OFF: WAN port 10Mbps is connected

WAN LNK/ACT

ON:

WAN is connected

OFF: No WAN connection

Flashing: WAN port has Activity (ACT), data

being sent

LAN 10/100M

ON: LAN port 100Mbps is connected

(Port 1-4) OFF:LAN port 10Mbps is connected

LAN LNK/ACT

ON: LAN is connected

(Port 1-4) OFF:No LAN connection

Flashing: LAN port has Activity (ACT), data

being sent

802.11G

ON: Wireless LAN has been activated

OFF:Wireless LAN is disabled

Flashing: Wireless LAN has Activity (ACT) data

being sent

All manuals and user guides at all-guides.com

Setup iagram

Figure 1.2 below shows a typical setup for a Local Area Network (LAN).

Figure 1.2

All manuals and user guides at all-guides.com

Getting started

This is a step-by-step instruction on how to start using the router and get connected to the

Internet.

1) Setup your network as shown in the setup diagram above (fig 1.2).

You then need to set your LAN PC clients so that it can obtain an IP address automatically.

All LAN clients require an IP address. Just like an address, it allows LAN clients to find one

another. (If you have already configured your PC to obtain an IP automatically then proceed

to step 3, page 11)

Configure your PC to obtain an IP address automatically

By default the broadband router’s DHCP is on, this means that you can obtain an IP address

automatically once you’ve configured your PC to obtain an IP address automatically. This

section will show you how to configure your PC’s so that it can obtain an IP address

automatically for either Windows 95/98/Me, 2000 or NT operating systems. For other

operating systems (Macintosh, Sun, etc.), follow the manufacturer’s instructions. The

following is a step-by-step illustration on how to configure your PC to obtain an IP address

automatically for 2a) Windows 95/98/Me, 2b) Windows XP, 2c) Windows 2000 and 2d)

Windows NT.

2a) Windows 95/98/Me

1: Click the Start button and select Settings, then click Control Panel. The Control Panel

window will appear.

2: Double-click Network icon. The Network window will appear.

3: Check your list of Network Components. If TCP/IP is not installed, click the Add button to

install it now. If TCP/IP is installed, go to step 6.

4: In the Network Component Type dialog bo , select Protocol and click Add button.

5: In the Select Network Protocol dialog bo , select Microsoft and TCP/IP and then click the

OK button to start installing the TCP/IP protocol. You may need your Windows CD to

complete the installation.

6: After installing TCP/IP, go back to the Network dialog bo . Select TCP/IP from the list of

Network Components and then click the Properties button.

7: Check each of the tabs and verify the following settings:

• Bindings: Check Client for Microsoft Networks and File and printer s aring for

Microsoft Networks.

• Gateway: All fields are blank.

• NS Configuration: Select Disable DNS.

• WINS Configuration: Select Disable WINS Resolution.

•

IP Address: Select Obtain IP address automatically

All manuals and user guides at all-guides.com

all-guides.com

8: Reboot the PC. Your PC will now obtain an IP address automatically from your

Broadband Router’s DHCP server.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server

available on your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to

Step 3

2b) Windows XP

1: Click the Start button and select Settings, then click Network Connections. The Network

Connections window will appear.

2: Double-click Local Area Connection icon. The Local Area Connection window will

appear.

3: Check your list of Network Components. You should see Internet Protocol [TCP/IP] on

your list. Select it and click the Properties button.

4: In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address

automatically and Obtain DNS server address automatically as shown on the following

screen.

All manuals and user guides at all-guides.com

5: Click OK to confirm the setting. Your PC will now obtain an IP address automatically

from your Broadband Router’s DHCP server.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server

available on your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to

Step 3.

2c) Windows 2000

1: Click the Start button and select Settings, then click Control Panel. The Control Panel

window will appear.

2: Double-click Network and Dial-up Connections icon. In the Network and Dial-up

Connection window, double-click Local Area Connection icon. The Local Area

Connection window will appear.

3: In the Local Area Connection window, click the Properties button.

4: Check your list of Network Components. You should see Internet Protocol [TCP/IP] on

your list. Select it and click the Properties button.

5: In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address

All manuals and user guides at all-guides.com

automatically and Obtain DNS server address automatically as shown on the following

screen.

6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically

from your Broadband Router’s DHCP server.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server

available on your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to

Step 3.

2d) Windows NT

1: Click the Start button and select Settings, then click Control Panel. The Control Panel

window will appear.

2: Double-click Network icon. The Network window will appear. Select the Protocol tab from

the Network window.

3: Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not

installed, click the Add button to install it now. If TCP/IP is installed, go to step 5.

4: In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok

All manuals and user guides at all-guides.com

button to start installing the TCP/IP protocol. You may need your Windows CD to

complete the installation.

5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of

Network Protocols and then click the Properties button.

6: Check each of the tabs and verify the following settings:

• IP Address: Select Obtain an IP address from a DHCP server.

• NS: Let all fields are blank.

• WINS: Let all fields are blank.

• Routing: Let all fields are blank.

7: Click OK to confirm the setting. Your PC will now obtain an IP address automatically

from your Broadband Router’s DHCP server.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server

available on your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to

Step 3.

All manuals and user guides at all-guides.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de Sitecom

Sitecom

Sitecom WLR-4000 Manual de usuario

Sitecom

Sitecom WL-153 Instrucciones de instalación

Sitecom

Sitecom WL-350 Manual de usuario

Sitecom

Sitecom WLR-8200 Manual de usuario

Sitecom

Sitecom WL-114V2 Manual de usuario

Sitecom

Sitecom WLM-4550 Manual de usuario

Sitecom

Sitecom WLM-3600 Manual de usuario

Sitecom

Sitecom N600 X5 Manual de usuario

Sitecom

Sitecom WL-154 Manual de usuario

Sitecom

Sitecom WLM-5600 Manual de usuario

Sitecom

Sitecom WLR-5001 Manual de usuario

Sitecom

Sitecom WLR-4003 Manual de usuario

Sitecom

Sitecom WLM-1500 Manual de usuario

Sitecom

Sitecom WL-114 Manual de usuario

Sitecom

Sitecom WL-114V2 Instrucciones de instalación

Sitecom

Sitecom WL-173 Manual de usuario

Sitecom

Sitecom DC-202 Instrucciones de instalación

Sitecom

Sitecom WL-370 Manual de usuario

Sitecom

Sitecom WL-308 Manual de usuario

Sitecom

Sitecom WL-610 Manual de usuario

Sitecom

Sitecom WL-176 Manual de usuario

Sitecom

Sitecom WLR-9500 Manual de usuario

Sitecom

Sitecom WL-536 Manual de usuario

Sitecom

Sitecom WLR-5002 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad