Siselectron SCI1132 Manual de usuario

Table of Contents

1. Overview................................................................................................................................2

1.1 Features......................................................................................................................2

1.2 Package Contents .......................................................................................................3

1.3 Dimensions..................................................................................................................4

1.4Connectors..................................................................................................................5

2. Camera Cabling.....................................................................................................................6

2.1 Power Connection .......................................................................................................6

2.2 Ethernet Cable Connection..........................................................................................6

2.4 Alarm I/O Connection ..................................................................................................6

2.5 RS-485 Connection .....................................................................................................7

3. System Requirements ..........................................................................................................8

4. Access Camera .....................................................................................................................9

5. Setup Video Resolution......................................................................................................12

6. Configuration File Export / Import .....................................................................................13

7. Tech Support Information ..................................................................................................14

7.1 Delete the Existing Viewer.........................................................................................14

7.2 Setup Internet Security..............................................................................................15

Appendix: Technical Specifications

1. Overview

Equipped with industrial-grade streaming compression technology, the Superior

HDR Zoom AF Box IP Camera supports up to 4M real-time video and quad

streams codec, and offers supreme image quality while keeping efficient and

valuable network bandwidth for storage management.

Possessing line-by-line HDR technology, the camera provides premium

performance under extreme low light contrast scenario or fluctuated lighting

environments.

Furthermore, with smart event function, alarm / motion can be categorized by

event types, which makes event management much easier. The camera offers

strengthened support for surveillance application that demands consistent

precision zoom control while high resolution and superior video quality are

requisite.

1.1 Features

Multiple Progressive Scan CMOS Sensor Support 4M Resolution

3x Optical Zoom with Auto Focus

HDR (Multiple Shutter Exposure) and WDR (Digital Enhancement)

Low Power Consumption on Encoding

Quad Codec Support- H.264 Baseline / Main / High Profile + MJPEG

Quad Streams Support

Smart Event Function-

Motion Detection / Network Failure Detection / Tampering Alarm / Periodical

Event / Manual Trigger / Audio Detection

Text Overlay and Privacy Masks

Multi-language Support

3D Motion Compensated Noise Reduction (MCTF)

BNC Analog Output

64GB micro SDXC SD Card Support

ONVIF Profile S Support

RS-485 Support

1.2 Package Contents

Please check the package containing the following items listed below.

Superior HDR

Zoom AF Box IP Camera

Power Switch Connector

(bundled software and documentation)

Quick Guide

1.3 Dimensions

The dimensions of the camera are shown below.

1.4 Connectors

The diagram below shows the various connectors of the camera. Definition for

each connector is given as follows.

No.

Connector

Definition

BNC

For analogue video output

Network LEDs

For network connection and activity indication

Audio I/O

Two-way audio transmission

microSD Card Slot

Insert the microSD card into the card slot to store videos

and snapshots. Do not remove the microSD card when

the camera is powered on.

PoE Network

For network and PoE connections

Default Button

Press the button with a proper tool for at least 20 seconds

to restore the system.

Power LED

For power connection indication (green light)

Power (DC 12V)

For power connection.

Alarm I/O

Alarm In 2 +

Alarm Out +

Alarm In –

D +

Alarm In 1 +

D −

Alarm Out –

NOTE: If users are to use with AC 24V power adaptor, please first

connect the supplied power switch to the power connector.

NOTE: It is not recommended to record with the microSD card for 24/7

continuously, as it may not be able to support long term continuous data

read/write. Please contact the manufacturer of the microSD card for

information regarding the reliability and the life expectancy.

2. Camera Cabling

Please follow the instructions below to complete the cable connections.

2.1 Power Connection

For power connection, please refer to section Connectors. Alternatively, users

can power the camera by PoE if a Power Sourcing Equipment (PSE) switch is

available. Refer to the section below for Ethernet cable connection.

NOTE: If PoE is used, make sure PSE is in used in the network.

2.2 Ethernet Cable Connection

To have best transmission quality, cable length shall not exceed 100 meters.

Connect one end of the Ethernet cable to the RJ-45 connector of the camera,

and plug the other end of the cable to the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when

connecting the camera directly to the PC.

Check the status of the link indicator and the activity indicator LEDs. If the LEDs

are unlit, please check the LAN connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

2.4 Alarm I/O Connection

The camera supports one alarm input and one relay output for alarm application.

Refer to alarm pin definition below to connect alarm devices to the IP camera if

needed.

1. Alarm In 2 +

2. Alarm In −

3. Alarm In 1 +

4. Alarm Out -

5. Alarm Out +

2.5 RS-485 Connection

The RS-485 connector is the interface for connecting with the pan & tilt

positioning system.

6. D +

7. D -

3. System Requirements

To perform the IP camera via web browser, please ensure the PC is in good

network connection, and meet the system requirements as described below.

Items

System Requirement

Personal Computer

Minimum :

1. Intel® CoreTM i5-2430M @ 2.4 GHz

2. 4 GB RAM

Recommended :

1. Intel® CoreTM i7-870 @ 2.93 GHz

2. 8 GB RAM

Operating System

Windows VISTA / Windows XP / Windows 7

Web Browser

Microsoft Internet Explorer (recommended)

Firefox

Chrome

Safari

Network Card

10Base-T (10 Mbps), 100Base-TX (100 Mbps) or

1000Base-T (1000 Mbps) operation

Viewer

ActiveX control plug-in for Microsoft IE

4. Access Camera

For initial access to the IP camera, users can search the camera through the

installer program: DeviceSearch.exe, which can be found in “DeviceSearch”

folder in the supplied CD.

Accessing the Camera by Device Search Software

Step 1: Double click on the program Device Search.exe.

Step 2: After its window appears, click on the <Device Search> button on the

top. All the finding IP devices will be listed in the page.

Step 3: Find the camera in the list by its IP address and click on it. The default

IP address of the camera is: 192.168.0.250.

Step 4: The default IP address of the camera may not be in the same LAN as

the IP address of the PC. If so, the IP address of the camera needs to

be changed. Right click on the camera and click <Network Setup>.

Meanwhile, record the MAC address of the camera, for future

identification.

Step 5: The <Network Setup> page will come out. Select <DHCP> and click

<Apply> down the page. The camera will be assigned with a new IP

address.

Step 6: Click <OK> on the Note of setting change. Wait for one minute to

re-search the camera.

Step 7: Click on the <Device Search> button to re-search all the devices. Find

the camera in the list by its MAC address. Then double click or right

click and select <Browse> to access the camera directly via a web

browser.

Tabla de contenidos

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Cisco

Cisco SPA-500 Series Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario