4. Establishing the connection between the motor and remote controller
Before the SIS1605 remote controller can control one or more drives, the connection
between the devices must be established. First select a channel on the SIS1605 remote
controller that is to be used to control one or a group of drives. Make sure that the
remote controller is in manual mode.
Please refer to the operation instructions of the LE-series drive you have received for the procedure
of teaching-in and end position setting.
5. Setting the roll up and down times
-If the set time shows "--:--", it means that on this day of the week and in this channel no
timer function is set.
-There are three possibilities available.
1. Each weekday can be set individually (Su flashes)
2. All weekdays have a uniform time (Mo - Su flash)
3. The working days and the weekend have different times (Mo - Fr flash)
1. Switch to the AUTO mode using
the mode button. Press and hold
the time button for 3 seconds.
You are now in setting mode.
