Sionyx Nightwave Series Manual de usuario
SERIES CAMERAS
TM
USER MANUAL
SIONYX, LLC
NIGHTWAVE
Made in Taiwan
SIONYX.com/patents
NEED HELP?
ONLINE CHAT
SUBMIT A TICKET
24/7 SUPPORT
CALL
www.sionyx.com
www.sionyx.com/contact
www.support.sionyx.com
(866) 827-8237
Register your device and
stay up to date by visiting
the URL or scanning the
QR code below.
SIONYX, LLC
Cummings Center
Beverly, MA 01915
U.S.A.
(978) 922-0684
FOLLOW US
Share your SIONYX content and be sure to tag us!
01TABLE OF CONTENTS
WELCOME TO NIGHTWAVE
GETTING STARTED
INSTALLATION
GETTING CONNECTED
CAMERA SETUP
SAFETY
MAINTENANCE
ADDITIONAL RESOURCES
02
03
05
14
17
18
27
28
TABLE OF CONTENTS
02 SIONYX NIGHTWAVE USER MANUAL
WELCOME TO NIGHTWAVE
NIGHTWAVE CAMERA
ANALOG VIDEO CAMERA
USB CABLE
ALLEN WRENCH
IN-LINE FUSE
USB CABLE
BOX INCLUDES:
THIS IS SIONYX. We believe that human endeavor should not be
limited by daylight. In the darkness of night, greatness is possible. Adventure
enabled. And a full sense of all sight achievable, no matter the light.
SMA TO BNC ADAPTER
BNC TO RCA ADAPTER
BASE GASKET
MOUNTING SCREWS
TEMPLATE
03GETTING STARTED
To get started, please review the legends on the following pages.
GETTING STARTED
GETTING STARTED
04 SIONYX NIGHTWAVE USER MANUAL
05INSTALLATION
INSTALLATION
When planning the installation location, consider the following points:
• The camera is waterproof, and appropriate for above decks mounting.
• When mounting the camera in a ball-down position, ensure that the camera
is installed with adequate drainage so that standing water does not collect
in the base.
• Ensure the camera is installed in a location that will allow it to be accessed
for regular periodic cleaning (fresh-water rinse), inspection of mounting
point integrity and mechanical soundness, and preventative maintenance.
• The underside (inside) of the compartment or deck on to which the camera
is mounted must be weather-tight. You must ensure protection from water
ingress to cables and connections.
• The mounting surface must be horizontal.
• Fixings are supplied for a mounting surface up to X mm (X in) thick. A
thicker surface will require the installer to provide alternative fixings.
• The camera should be mounted as high as practical, but without interfering
with any radar, navigational or communications electronics.
• Choose a location that will provide the most unobstructed view in all
directions.
• Select a location for the camera that is at least X m (X in.) from any magnetic
compass.
• Select a location that is at least X m (X ft) from devices that may cause
interference, such as motors, generators and radio transmitters / receivers.
CAMERA MOUNTING: LOCATION
06 SIONYX NIGHTWAVE USER MANUAL
Plan your system.
Obtain all required equipment and tools.
Site all equipment.
Route all cables.
Drill cable and mounting holes.
Make all connections into equipment.
Secure all equipment in place.
Power on and test the system.
Installation includes the following activities:
INSTALLATION CHECKLIST
INSTALLATION
07INSTALLATION
MOUNTING THE CAMERA
Use these instructions to mount the camera unit in position.
Using the template supplied, mark and drill the holes for mounting the camera.
Mounting the Camera: Bottom Up
PLACEHOLDER:
BOTTOM UP
08 SIONYX NIGHTWAVE USER MANUAL
Mounting the Camera: Top Down
PLACEHOLDER:
TOP DOWN
Otros manuales para Nightwave Series
1
Tabla de contenidos
Otros manuales de Cámara digital de Sionyx
