Sintrol Wireless Router Manual de usuario
Sintrol Wireless Router
Manual
Version 1.0.1
Wireless Router User Manual 2
Table of Contents
1INTRODUCTION ......................................................................................... 3
1.1 Product overview...........................................................................................3
2INSTALLATION ........................................................................................... 4
2.1 Selecting the installation location..................................................................4
3WIRING ..................................................................................................... 6
3.1 Building Sintrol network ................................................................................7
Applying local RF bus................................................................................7
4DIMENSIONS ............................................................................................. 9
5OPERATION ..............................................................................................10
5.1 PARAMETERS ...............................................................................................10
5.2 PROPERTIES..................................................................................................11
RS485......................................................................................................11
USB .........................................................................................................11
RF............................................................................................................11
Security key ............................................................................................11
Lock password ........................................................................................11
Device password ....................................................................................11
5.3 NETWORK.....................................................................................................13
Create the network ................................................................................13
Manually routing the devices.................................................................13
Transmission power level options .........................................................14
Usage of transmission power levels.......................................................14
6MAINTENANCE .........................................................................................15
7TROUBLESHOOTING..................................................................................15
7.1 No USB-connection to PC.............................................................................15
7.2 No response over RF....................................................................................15
7.3 No response over RS485..............................................................................15
Wireless Router User Manual 3
1INTRODUCTION
This manual describes how to install and use SINTROL’s Wireless Router product.
Sintrol shall not be liable for any loss or damage whatsoever arising from use of
any information or details therein, or omission or error in this manual, or any
misuse of the product.
The instrument can be accessed by utilizing the free DustTool software to manage
the basic settings of the product.
Commercial software product DustLog provides comprehensive control and
diagnostics tools over the product and over the whole Sintrol network.
Features of the Wireless Router are for example:
Gather data from Sintrol Network seamlessly, utilizing RS485 and RF
connections between products.
Visualize the Sintrol network topology and unit locations.
Provide tools to:
oAutomatically form the network
oManually modify the network
oGet real time diagnostics
Manage and parameterize all products within the Sintrol Network
The DustTool software can be downloaded free of charge from Sintrol web-site
http://www.sintrolproducts.com
1.1 Product overview
The Wireless Router Dust monitor is a microprocessor-based unit, equipped with
USB, RS485 and Sintrol’s local RF-link connections.
The device is designed to manage all Sintrol products connected to Sintrol
Network. The Wireless Router has been specifically designed for easy installation
and reliable operation.
Wireless Router User Manual 4
2INSTALLATION
2.1 Selecting the installation location
The best location for installation location is where RF antenna is not blocked by
large metal objects or walls, which may cause reflections or block the wireless
signal.
Although the device is IP65 classified and can handle industrial conditions, avoiding
unnecessary environmental stress is encouraged.
If possible, during the installation ensure that:
1. Temperature conditions are mild and temperature variation is not extreme.
2. Unit is not installed into direct sun light
3. No large amplitude vibration exists
4. The unit is not directly exposed to any kind of piling particles, especially
conductive.
5. The unit is not directly exposed to soil dust, dirt, snow or rain.
6. The unit is to be installed the way that the antenna points upwards.
7. The unit is not installed next to third party devices applying RF-
communication or creating strong RF disturbances.
Enclosure supports optional mounting feet installation, to enable easy wall
installations.
Wireless Router User Manual 5
Figure 1 Installation with optional mounting feet.
Wireless Router User Manual 6
3WIRING
To connect the device, open the enclosure. Any unnecessary exposure of the
connectors to moisture or dirt needs to be avoided.
NC = Not connected.
Table 1 Wiring and signals
Wireless Router User Manual 7
3.1 Building Sintrol network
Applying local RF bus
Local area radio frequency bus operates within international license free ISM-
bands. All Sintrol products equipped with RF-link operate as a part of the bus,
creating and routing data within the network. This feature in most cases eliminate
any need for repeaters or manual configuration tasks.
RF-bus is especially recommended to be used in industrial locations where bi-
directional communication is required and/or a strong galvanic isolation is needed.
Long distance connections up to 1 km without the line of sight can be acquired.
Range can also be extended with accessories like directional antennas and/or
separate repeater units.
Figure 2 RF bus application example
Notes:
Sintrol Network Router operates with Sintrol products having RF-network support.
Wireless Router User Manual 8
TECHNICAL SPECIFICATION
Product name
Wireless Router
Protection Category
IP65
Power Supply
12 - 24 VDC
Power Consumption
Under 3W, depending on usage
Wiring
Two DIN PG11 glands for cables
Connectors
1. USB wires connectore with 45° angle:
a. solid from 0.2 to 1.5 mm2
b. stranded from 0.2 to 1.0 mm2
2. Low voltage conn with 45° angle:
a. solid from 0.2 to 1.5 mm2
b. stranded from 0.2 to 1.0 mm2
3. mini USB connector inside the box
Communication Interfaces
Serial communication: RS-485
USB
Radio frequency (RF)
Communication Protocol
Proprietary Sintrol Network protocol
Wireless communication
Transmit power
Up to 400 mW (+26 dBm), user adjustable
Frequency band
868/915 MHz (license free ISM band)
15 channels
Receiver sensitivity
-110 dBm
Typical range (no line of sight)
Up to 1300 m in urban environment
Up to 11 km with directional antennas
Materials and Weight
Enclosure
Plastic ABS
Weight, excluding antenna
180 g
Weight of standard antenna
20 g
Table 2 Technical specification
Wireless Router User Manual 9
4DIMENSIONS
Figure 3 Structure and dimensions
Wireless Router User Manual 10
5OPERATION
The Wireless Router creates and maintains the connections between Sintrol
Products and Sintrol’s PC software, thus the main operation of the Wireless Router
is mostly transparent.
Device itself has but a few configuration related controls of its own. All the controls
are managed by the dedicated Sintrol PC-softwares: DustTool and/or DustLog.
5.1 PARAMETERS
On the parameters tab the router name can be changed in order to easier identify
the unit.
Device also measures the power source it is connected to and shows the measured
input voltage for diagnostic reasons. If no input voltage can be detected, the
device is not fully working.
Figure 4 Parameters tab
Tabla de contenidos
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad