SinoCon KonNad C2000-A2-SAX0200-FX3 Manual de usuario

Last updated: 2019-12-13

C2000-A2-SAX0200-FX3

User Manual

Ethernet ← 2AI

0-20/4-20 mA

Remote I/O Module — Ethernet Analog I/O Module

SinoCon Co., Ltd.

Catalog

1. Hardware Description

1.1. Specifications

1.2. Apprearance

1.3. Indicators

1.4. Port Description

1.5. Product Dimensions

1.6. Installation Method

2. Package Contents

3. Warranty Policy

C2000-A2-SAX0200-FX3 User Manual

2 / 12

SinoCon Co., Ltd. www.sinoconsys.com

Trademarks

The KonNaD logo is a registered trademark of SinoCon Co., Ltd. All other trademarks or registered marks in this

manual belong to their respective manufacturers.

Disclaimer

This document only provides information about KonNaD products. No license to any intellectual property rights is

granted by this document, including any intellectual property licenses, expressed or implied, or by any means.

SinoCon assumes no responsibility other than the liability stated by SinoCon in the terms and conditions of sale of

its products and SinoCon makes no warranties regarding the sale or use of KonNaD products, including the

suitability for the specific use of the products, and marketability, and SinoCon doesn't guarantee that it won't

infringe any patent, copyright or other intellectual property rights, etc.

Information in this document is subject to change without notice and does not represent a commitment on the

part of SinoCon.

SinoCon Co., Ltd.

Address: 16th Floor, Tower A, Zhongyin Building, Caitian Road, Futian District, Shenzhen, China

Web: www.sinoconsys.com

Tel: +86 0755-88865168

C2000-A2-SAX0200-FX3 User Manual

3 / 12

SinoCon Co., Ltd. www.sinoconsys.com

C2000-A2-SAX0200-FX3 User Manual

4 / 12

SinoCon Co., Ltd. www.sinoconsys.com

1. Hardware Description

1.1. Specifications

Classification Parameter Specification

Analog Input AI Channels 2

Connector Terminal block

Acquisition Range 0-20/4-20mA

Acquisition Accuracy 1‰

Resolution 16 bit

Acquisition Characteristics Differential input

Acquisition Frequency 10/30Hz (configurable)

Channel-to-Channel Isolation 350VDC

Input Impedance 240Ω

Ethernet No. of Ports 1

Bandwidth 10/100M

Communication Distance 100m

Industrial Protocols Standard Modbus TCP Protocol

Protocol Mode Support TCP Server/Client Mode

Downstream Serial

Port

Serial Standard RS485

No. of Ports 1

Connector Terminal block

Cascade Connection/Transparent

Transmission

RS485 cascade connection

Power Power Connector Terminal block

Input Voltage 9~27VDC

C2000-A2-SAX0200-FX3 User Manual

5 / 12

SinoCon Co., Ltd. www.sinoconsys.com

Current 80mA @ 12VDC

Physical Characteristics Dimensions 75*105*30mm

Installation Din-rail or wall

Environmental Limits Operating Temperature -40℃ ~ 85℃

Storage Temperature -60℃ ~ 125℃

Ambient Relative Humidity 5% ~ 95% RH, non-condensing

Classification Parameter Specification

C2000-A2-SAX0200-FX3 User Manual

6 / 12

SinoCon Co., Ltd. www.sinoconsys.com

1.2. Apprearance

C2000-A2-SAX0200-FX3 User Manual

7 / 12

SinoCon Co., Ltd. www.sinoconsys.com

1.3. Indicators

Classification Indicator Description Meaning

Ethernet LINK Network status

indicator

Steady on：Network connection enabled

Flashing：Transmit or receive data

Off：The network port is not plugged into the network

cable

SPD 10/100Mbps

indicator

Steady on：100M network connected

Off：Not connected to the 100M network

Downstream

Serial Port

RXD RS485 data

receive

indicator

Steady on：RS485 line fault, please check if the positive

and negative poles of 485 line are reversed

Flashing：RS485 receiving data

Off：RS485 no receiving data

TXD RS485 data

transmit

indicator

Flashing：RS485 transmitting data

Off：RS485 no transmitting data

Power PWR Power indicator Steady on：Normal power supply

Off：No power or abnormal power supply, please check if

the voltage range is 9~27VDC

RUN RUN Running

indicator

Steady on：Device exception

Flashing：Flashes every 1 second when the device is ready

Off：Device exception

C2000-A2-SAX0200-FX3 User Manual

8 / 12

SinoCon Co., Ltd. www.sinoconsys.com

1.4. Port Description

Classification Port Description Recommended

wiring

Analog Input +、- Positive analog input, Negative analog input RVV 2*0.5

Ethernet Ethernet RJ45 Ethernet port CAT-5e

Downstream Serial

Port

485+ 、

485-

RS485+, RS485- (downward) RVSP 2*1.0

Power Input V+、V- Power supply input positive, power supply input

negative

RVV 2*1.0

C2000-A2-SAX0200-FX3 User Manual

9 / 12

SinoCon Co., Ltd. www.sinoconsys.com

1.5. Product Dimensions

unit: mm（inch）

1.6. Installation Method

C2000-A2-SAX0200-FX3 User Manual

10 / 12

SinoCon Co., Ltd. www.sinoconsys.com

Tabla de contenidos

Otros manuales de Sistema de E/S de SinoCon

SinoCon

SinoCon KonNad C2000-A2-SMX2800-AC1 Manual de usuario

SinoCon

SinoCon KonNaD C2000-A2-SDD8020-AD1 Manual de usuario

SinoCon

SinoCon KonNad C2000-A2-SDD8080-AC1 Manual de usuario

SinoCon

SinoCon KonNad C2000-A1-SXD0020-BX3 Manual de usuario

SinoCon

SinoCon KonNaD C2000-A1-SDX2000-AX3 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario