Simplified MFG REX2 Manual de usuario
Thank you for purchasing the REX2 Extender
The REX2 is a HDMI 1.4b 4K Extender set designed to provide
years of reliable service. Please keep this manual as a reference.
Surge protection device recommended
The external supply is very robust, but a surge device is always
good insurance in electrically active areas where the power grid
is unreliable. If connected to satellite or cable boxes, the
HDSURGE is recommended to prevent surges through the HDMI
cable.
Table of Contents
1.
Introduction................................................................................ 1
2.
Features. .....................................................................................
1
3.
Package Contents................................................................. 2
4.
Specifications. ...................................................................... 2
5.
Operation Controls and Functions........................................ 4
5.1
Transmitter Panel……………………………………………………4
5.2
Receiver Panel……………………………………………………5
5.3
IR Pin Definition……………………………………………………..6
6.
Application Example............................................................. 7
7.
Warranty……………………………………………………………….8
8.
Contact……………………………………………………………..9
1/9
1.
Introduction
The REX2 Extender can extend a 1080p AV signal up to 70m (232ft)
and a 4K 30hz. signal up to 40m (131ft). The REX2 is compact and
robust making it an excellent 1080p extender with the ability to also
support 4K@30Hz. Applications would be 1080p video consoles,
STB’s, cameras, and DVRs. Other applications could be 4K 30Hz
streamers and Blu-Ray Players.
2.
Features
•Compact Design
•IR Pass-through from display back to TX
•Supports HDR10/HDR10+/DolbyVision
•Supports up to 4K 230Hz.
CAT6: 230ft/70m for 1080p, 131ft/40m for 4K30
CAT5E: 197ft/60m for 1080p, 115ft/35m for 4K30
• Loop out allows cascading or intercepting of signal
• EDID can be attained from RX or Loop out
2/9
3.
Package Contents
1 × HDMI Transmitter
1 × HDMI Receiver
1 × IR Blaster Cable
1 × IR Receiver Cable
2 × 5V/1A DC Power Adapter
1 × User Manual
4.
Specifications
Technical
HDMI Compliance
HDMI 1.4
HDCP Compliance
HDCP 1.4
Video Bandwidth
10.2Gbps
Video Resolution
Up to 4K@30Hz
Audio Support
Up to 7.1CH HD audio
Input TMDS Signal
3.3 volts
Input DDC Signal
5.0 volts/P-P
ESD Protection
Human Body model:
+/- 8 kV (air-gap discharge)
+/- 4 kV (contact discharge)
3/9
Connection
Transmitter
Input: 1 x HDMI Type A [19-pin female]
Outputs:1 x HDMI Type A [19-pin female]
1 x IR OUT [3.5mm Stereo Mini jack
]
1 x CAT OUT [RJ45, 8-pin female]
Receiver
Inputs: 1x IR IN [3.5mm Stereo Mini jack]
1x CAT IN [RJ45, 8-pin female]
Output: 1x HDMI Type A [19-pin female]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
79.5mm (3.125”) [W] x 69mm (2.75”) [D] x
16.5mm (0.65”) [H]
Weight
Transmitter: 132g (4.65 oz.), Receiver: 130g
(4.6 oz.)
Power Supply
5V/1A DC
Power Consumption
Transmitter: 1.86W, Receiver: 0.87W
Operation
Temperature
32 - 104°F / 0 - 40°C
Storage temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
4/9
5.
Operation Controls and Functions
5.1
Transmitter Panel
No.
Name
Function Description
1HDMI IN
HDMI signal input port. Connect to HDMI
source device.
2EDID
Switch
The switch is used for selecting EDID: Switch
to the right position, the extender will copy
HDMI loop out display EDID information to
signal source. Switch to the left position, the
extender will copy Receiver displayEDID
to signal source.
3HDMI OUT
HDMI signal loop out port. Connect to HDMI
display device such as HDTV.
4IR OUT
Connect to IR blaster cable, the IR signal is
from the IR IN port of the receiver.
5Power LED
When the transmitter is powered on, the LED
will be Illuminated.
6CAT
CAT output port. Connect to the CAT input
port of the receiver with CAT5E/6 cable.
IR OUT DC 5V
HDMI OUTEDID
HDMI IN CAT
5/9
7Link LED
When the transmitter is connected to HDMI
source, the LED will be illuminated.
8
DC 5V
DC 5V power supply port.
5.2
Receiver Panel
No.
Name
Function Description
1HDMI OUT HDMI signal output port. Connect to HDMI
display device such as HDTV.
2IR IN
Connect to IR receiver cable, the IR signal
will emit to the IR OUT port of the
transmitter.
3Power LED
When the receiver is powered on, the LED
will be on.
4CAT CAT input port. Connect to the CAT output
port of the transmitter with CAT5E/6 cable.
5Link LED
When the receiver is connected to HDMI
source, the LED will be on.
6
DC 5V
DC 5V power supply port.
IR IN DC 5VCAT
HDMI OUT
6/9
5.3
IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
IR RECEIVER IR BLASTER
IR Blaster
IR Receiver
IR Blaster Signal
Power
NC
IR Signal
Power
Grounding
7/9
6.
Application Example
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
IR OUT DC 5V
HDMI OUTEDID
HDMI IN CAT
IR IN DC 5VCAT
HDMI OUT
DVD or Blu-ray Player
UHDTV
UHDTV
IR Receiver
LAN
LAN
IR Blaster
Transmitter
Receiver
Power Supply
CAT5E/6 cable
Power Supply
8/9
7.
Warranty
Should you feel that this product does not function adequately
due to defects in materials or workmanship, we (referred to as
“the warrantor”) will, for the length of the period indicated below
(starting from the original date of the purchase) either a) repair
the product with new or refurbished parts. Or b) Replace the
product with new or refurbished product. All Simplified MFG
products are covered by a 3-year PARTS and LABOR warranty.
During this period there will be no charge for unit repair,
replacement of unit components or replacement of the product if
deemed necessary. The decision to repair or replace is made by
the warrantor. The purchaser must mail in the product during
the warranty period. This limited warranty only covers the
product purchased as new and is extended to the original
purchaser only. It is non-transferrable to subsequent owners,
even during the warranty period. A purchase receipt or other
proof of purchase date is required for the limited warranty
service.
Otros manuales para REX2
1
Tabla de contenidos
Otros manuales de Extensor de Simplified MFG
Simplified MFG
Simplified MFG REX2 Manual de usuario
Simplified MFG
Simplified MFG EX3-8K Manual de usuario
Simplified MFG
Simplified MFG EX1502K Manual de usuario
Simplified MFG
Simplified MFG EXACKT Manual de usuario
Simplified MFG
Simplified MFG EXARC Manual de usuario
Simplified MFG
Simplified MFG EXTDA Manual de usuario
Simplified MFG
Simplified MFG EX1L Manual de usuario
Simplified MFG
Simplified MFG EXUSB2.0 Manual de usuario
Simplified MFG
Simplified MFG EX1L Manual de usuario
Simplified MFG
Simplified MFG EXeARC1 Manual de usuario
