PG 6CP920 USER GUIDE
Placing and Answering Phone Calls (continued)
PLACING A CALL OVER BLUETOOTH
If you connect a Bluetooth-Enabled mobile phone with your IP phone, you can place a mobile call
on your mobile phone or IP phone. The IP phone screen and mobile phone screen both shows the
connected call. You can use the IP phone as a hands free device for the call. You can use the IP
phone to place both the mobile call and IP call, and two types of calls will not affect each other.
To place a mobile call over Bluetooth on your IP phone:
1. Connect a Bluetooth-Enabled mobile phone with your phone.
2. Tap .
3. Tap the Switch soft key to select Mobile Account.
4. Enter the desired number.
5. Tap , , or the Send soft key.
To place a mobile call over Bluetooth on your mobile phone:
1. Connect a Bluetooth-Enabled mobile phone with your phone.
2. On your mobile phone, place a call to a desired contact. The outgoing call information appears on
both your IP phone and mobile phone screen.
3. On your mobile phone, select CP920 as your audio source.
Bluetooth: the audio goes through the IP phone.
Handset earpiece or Speaker: the audio goes through the mobile phone.
The audio goes through the IP phone although the mobile phone screen also shows a connected call.
You can hold, mute or end the call on the IP phone, and after you hold the call you can resume the call
or place a new call.
PLACING A CALL FROM HISTORY
To place a call from the call history list:
1. Tap the History soft key.
2. Select the desired call history list and then tap the Enter soft key.
3. Tap or to select the desired entry.
4. Tap the Send soft key.
CONTINUED ON NEXT PAGE
