www.simplemedical.cn
Simple Medical (Shenzhen) Limited
Instruction for Use
Simple LSO 200
Model: 52009 Size: F
Thank you for purchasing our products! Please read this
instruction carefully before operation! To fully understand the
product, in order to ensure the safety and effectiveness of the
product, and please properly save the manual for future reference
Product overview
1)Product name：Simple LSO 200
2)Product model：52009
3)Product specification：F
4)Product Structure：
The product is mainly composed of air-permeable mesh cloth,
nylon wire, pull ring, liner, plastic pulley support system and magic
tape.
5)Operating principle:
The product adopts a double independent mechanical pulley
system to provide patients with superior compression level,
maximum comfort, flexible control, stable support and effective
pain relief. The flexible rear pulley system conforms to the patient's
body type and can easily adjust the required comfort level when
standing or sitting. A single product has many choices of suitable
sizes. The contoured filler panel and breathable mesh provide
comfortable wearability for patients.
6)Scope of application:
It is suitable for IDET procedures, Low back pain/strain, Lumbar
disc injury, Compression fractures, Osteoporosis, Disc herniation
and degeneration, Spondylolisthesis
Product features and performance description
1) Product features and storage conditions
【Product features】Multi-fit sizing options, double independent
pulley system, contoured padded panels, wide adjustments,
greater comfort & compliance .
【Storage conditions】This product should be stored in a room
with no more than 80% relative humidity, no corrosive gas and
good ventilation to avoid high temperature
2) Using the operating
【Application Instructions】
APPLICATION INSTRUCTIONS
STEP 1: Take the soft gasket down, peel off the connecting plate with
the transverse extension wide fixed band, and then adjust the wide
fixing band through the fixing port and the support port according to
the personal body type to the appropriate size (internal marking
S/M/L/XL/XXL) fold back into the fixing port with the edge of the
middle connection plate as the boundary, and then fix it back into the
fixing port. (Fig1a)
STEP 2: Pass the removed gasket through the wide band, and the wool
surface of the gasket is aimed at and glued to the hook in the middle
of the support (Fig 2a).
STEP 3: Place the Lumbar Brace at the waist, the center is aligned with
the spine, and the bottom is at the coccyx. After the fixed belt is
fastened to the waist, the hook panel will be affixed to the hairy
surface panel. Then pull the pull ring out until the fastening band is
tightened and then firmly adhered to the front panel(Fig 3a~3d).
WARNING:
The application instructions listed above are for use only by
qualified professionals. Unless otherwise directed by orthopedic
professionals, patients are not advised to try to use or adjust the
device. Any further adjustment or wear frequency and wear
time will be determined by your orthopedic professional.
Maintenance:
Soft items can be washed with neutral detergents and 30 ℃sailors
and dried naturally. Do not put in the clothes dryer or use other heat
sources for drying. Salt water, sand, dirt and other elements can
cause damage. After exposure to these conditions, rinse thoroughly
with clean water and dry or dry towels (not machine dry). If you need
detergent, please use mild detergent; do not use softener and bleach.
Rigid parts can be wiped clean with wet cloth.
Warning:
If you experience pain, swelling, irritation, or discomfort while using
this product, discontinue use and consult your doctor.
* For a single patient only, not recommended for multiple patients.
Basic product environment
1) Ambient temperature: -15 ~ 60 ℃
2) Relative humidity: 80%
Product material
1) Main body: nylon.
2)pulley support: polyethylene
3) pull ring: thermoplastic elastomer
4)backing strap :nylon
Contraindication
Do not use in case of allergy;
Those with unknown skin masses are forbidden;
Those with swollen or ulcerated skin are forbidden;
Storage, transportation and expiry date of
products
1)Product is valid：Three years
2 )Product storage：Please place it in a dry and clean room
before use to ensure ventilation
3) Transportation: the product shall be dustproof,
moisture-proof and pollution-proof during storage and
transportation
Disposal of wastes
Disposal of wrapping paper (bags): please dispose of the
packaging of this product according to the local laws.
Symbol and picture description
Manufacture Date
Batch Code
medical device
CE Symbol
Protect from sunlight
Hand wash only
Do not use when the packing is damaged
Warnings and Precautions
Reference instructions
Accessories list
Instructions------ 1 copy
After-sales warranty
If there is any defect in the material or process of the
product, please contact your vendor directly, and the Simple
medical will repair or replace the product.
Simple Medical (Shenzhen) Limited
Address: 519 Wisdom Valley, No.1010 Bulong Road,
Minzhi Street,Longhua District,
Shenzhen, China.518109
Tel : +86-755-86038563
Web: www.simplemedical.cn
E-mail: info@simplemedicla.cn`
SUNGO Europe B.V.
Olympisch Stadion 24, 1076DE Amsterdam, Netherlands
*Please refer to the Instructions before usage.
