Silicon Graphics Rackable C2110G-RP5 Manual de usuario
SGI®Rackable™C2110G-RP5
System User Guide
007-5841-001
COPYRIGHT
© 2012 SGI. All rights reserved; provided portionsmay be copyright in third parties, as indicated elsewhere herein. No permission is granted to copy, distribute,
or create derivative works from the contents of this electronic documentation in any manner, in whole or in part, without the prior written permission of SGI.
LIMITED RIGHTS LEGEND
The software described in this document is“commercial computer software” provided with restricted rights (except as to included open/free source) as specified
in the FAR 52.227-19 and/or the DFAR 227.7202, or successive sections. Use beyond license provisions is a violation of worldwide intellectual property laws,
treaties and conventions. This document is provided with limited rights as defined in 52.227-14.
The electronic (software) version of this document was developed at private expense; if acquired under an agreement with the USA government or any
contractor thereto, it is acquired as “commercial computer software” subject to the provisions of its applicable license agreement, as specified in (a) 48 CFR
12.212 of the FAR; or, if acquired for Department of Defense units, (b) 48 CFR 227-7202 of the DoD FAR Supplement; or sections succeeding thereto.
Contractor/manufacturer is SGI, 46600 Landing Parkway, Fremont, CA 94538.
TRADEMARKS AND ATTRIBUTIONS
SGI, and the SGI logo are registered trademarks and Rackable is a trademark of Silicon Graphics International in the United States and/or other countries
worldwide.
Intel, Intel QuickPath Interconnect (QPI) and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and
other countries.
Fusion-MPT, Integrated RAID, MegaRAID, and LSI Logic are trademarks or registered trademarks of LSI Logic Corporation.
HyperTransport is a licensed trademark of the HyperTransport Technology Consortium.
InfiniBand is a registered trademark of the InfiniBand Trade Association.
Internet Explorer and MS-DOS are registered trademarks of Microsoft Corporation.
Java and Java Virtual Machine are trademarks or registered trademarks of Sun Microsystems, Inc.
Linux is a registered trademark of Linus Torvalds, used with permission by SGI.
Novell and Novell Netware are registered trademarks of Novell Inc.
PCIe and PCI-X are registered trademarks of PCI SIG.
Phoenix and PhoenixBIOS are registered trademarks of Phoenix Technologies Ltd.
Red Hat and all Red Hat-based trademarks are trademarks or registered trademarks of Red Hat, Inc. in the United States and other countries.
SUSE LINUX and the SUSE logo are registered trademarks of Novell, Inc.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company, Ltd.
All other trademarks mentioned herein are the property of their respective owners.
007-5841-001 iii
Record of Revision
Version Description
001 May, 2012
First release
007-5841-001 v
About This Guide
This guide provides an overview of the installation, architecture, general operation, and
descriptions of the major components in the SGI®Rackable™C2110G-RP5 server. It also
provides basic troubleshooting and maintenance information, BIOS information, and important
safety and regulatory specifications.
Audience
This guide is written for users of SGI Rackable C2110G-RP5 server systems. It is written with the
assumption that the reader has a good working knowledge of computers and computer systems.
This guide may be useful to installers and system administrators looking for overview information
on the server.
Chapter Descriptions
The following topics are covered in this guide:
• Chapter 1, “Introduction”
Provides an overview of the server’s components.
• Chapter 2, “Server Installation”
Provides a quick setup checklist to get the server operational.
• Chapter 3, “System Interface”
Describes several LEDs on the control panel as well as others on the SATA drive carriers
that keep you constantly informed of the overall status of the system as well as the activity
and health of specific components.
• Chapter 4, “System Safety”
Provides general system safety information.
• Chapter 5, “System Severboard Information”
vi 007-5841-001
Provides best practice procedures to work with a node board in the C2110G-RP5 chassis,
install memory DIMMs, PCIe expansion cards and hard disk drives.
• Chapter 6, “Basic Troubleshooting and Chassis Service”
Describes some basic steps required to troubleshoot your system. Additional sections in this
chapter are intended to guide you through basic component remove and replace procedures.
•Appendix A, “BIOS Error Codes,”
Provides a brief listing of BIOS error code information.
• Appendix B, “System Specifications,”
Describes system component environmental specifications and compliance.
:
007-5841-001 vii
Related Publications
The following SGI and LSI documents may be relevant to the use of your server:
•MegaRAID SAS Software User’s Guide, publication number, 860-0488-00x
•SGI Performance Suite series documentation
•SGI InfiniteStorage series documentation
• Man pages (online)
You can obtain SGI documentation (as well as the pertinent LSI books), release notes, or man
pages in the following ways:
• Refer to the SGI Technical Publications Library at http://docs.sgi.com. Various formats are
available. This library contains the most recent and most comprehensive set of online books,
release notes, man pages, and other information.
• You can also view man pages by typing man <title> on a command line.
SGI systems include a set of Linux®man pages, formatted in the standard UNIX®“man page”
style. Important system configuration files and commands are documented on man pages. These
are found online on the internal system disk (or DVD-CD) and are displayed using the man
command. For additional information about displaying man pages using the man command, see
man(1).
In addition, the apropos command locates man pages based on keywords. For example, to
display a list of man pages that describe disks, type the following on a command line:
apropos disk
For information about setting up and using apropos, see apropos(1).
viii 007-5841-001
Conventions
The following conventions are used throughout this document:
Product Support
SGI provides a comprehensive product support and maintenance program for its products. SGI
also offers services to implement and integrate Linux applications in your environment.
• Refer to http://www.sgi.com/support/
• If you are in North America, contact the Technical Assistance Center at
+1 800 800 4SGI or contact your authorized service provider.
• If you are outside North America, contact the SGI subsidiary or authorized distributor in
your country.
Convention Meaning
Command This fixed-space font denotes literal items such as commands, files,
routines, path names, signals, messages, and programming language
structures.
variable The italic typeface denotes variable entries and words or concepts being
defined. Italic typeface is also used for book titles.
user input This bold fixed-space font denotes literal items that the user enters in
interactive sessions. Output is shown in nonbold, fixed-space font.
[ ] Brackets enclose optional portions of a command or directive line.
... Ellipses indicate that a preceding element can be repeated.
man page(x) Man page section identifiers appear in parentheses after man page names.
GUI element This font denotes the names of graphical user interface (GUI) elements such
as windows, screens, dialog boxes, menus, toolbars, icons, buttons, boxes,
fields, and lists.
:
007-5841-001 ix
Reader Comments
If you have comments about the technical accuracy, content, or organization of this document,
contact SGI. Be sure to include the title and document number of the manual with your comments.
(Online, the document number is located in the front matter of the manual. In printed manuals, the
document number is located at the bottom of each page.)
You can contact SGI in any of the following ways:
• Contact your customer service representative and ask that an incident be filed in the SGI
incident tracking system.
• Send mail to the following address:
SGI
Technical Publications
46600 Landing Parkway
Fremont, CA 94538
SGI values your comments and will respond to them promptly.
Tabla de contenidos
Otros manuales de Servidor de Silicon Graphics
Silicon Graphics
Silicon Graphics UV 300H Manual de usuario
Silicon Graphics
Silicon Graphics 1400 Manual de instalación y operación
Silicon Graphics
Silicon Graphics 1200 Manual de usuario
Silicon Graphics
Silicon Graphics 2400 Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C1000 Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C2005 2U Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C2005 Family Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C2112-4RP9 Manual de usuario
Silicon Graphics
Silicon Graphics Origin 3900 Manual de usuario
Silicon Graphics
Silicon Graphics Altix XE210 Manual de usuario
Silicon Graphics
Silicon Graphics InfiniteStorage C1104-GP6 Manual de usuario
Silicon Graphics
Silicon Graphics POWER CHALLENGE Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C1104G-RP5 Manual de usuario
Silicon Graphics
Silicon Graphics SGI 1100 Manual de instalación y operación
Silicon Graphics
Silicon Graphics UV 2000 Manual de usuario
Silicon Graphics
Silicon Graphics UV 20 Manual de usuario
Silicon Graphics
Silicon Graphics Octane III Manual de usuario
Silicon Graphics
Silicon Graphics InfiniteStorage 3500 Manual de usuario
Silicon Graphics
Silicon Graphics InfiniteStorage 3000 Manual de usuario
Silicon Graphics
Silicon Graphics InfiniteStorage 3104 Manual de usuario
