Silicon Graphics Origin200 Manual de usuario
Origin200™Owner’s Guide
Document Number 007-3415-002
Origin200™ Owner’s Guide
Document Number 007-3415-002
CONTRIBUTORS
Written by Kameran Kashani
Illustrated by Francesca Angelesco, Cheri Brown, Dan Young, and Kameran Kashani
Production by Lorrie Williams
Engineering contributions by Jeffery Heller, Dave Parry, Ken Hibbard, Ron Weiss,
Eric Williams, Demick Boyden, Steve Smithson, Dilip Amin, Richard Wright, Brad
Morrow, Tim Wong, Tom Jackman, and Carl Strasen.
St. Peter’s Basilica image courtesy of ENEL SpA and InfoByte SpA. Disk Thrower
image courtesy of Xavier Berenguer, Animatica.
© 1996, Silicon Graphics, Inc.— All Rights Reserved
The contents of this document may not be copied or duplicated in any form, in whole
or in part, without the prior written permission of Silicon Graphics, Inc.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure of the technical data contained in this document by
the Government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the
Rights in Technical Data and Computer Software clause at DFARS 52.227-7013
and/or in similar or successor clauses in the FAR, or in the DOD or NASA FAR
Supplement. Unpublished rights reserved under the Copyright Laws of the United
States. Contractor/manufacturer is Silicon Graphics, Inc., 2011 N. Shoreline Blvd.,
Mountain View, CA 94043-1389.
Silicon Graphics, the Silicon Graphics logo, Indigo, CHALLENGE, and Onyx are
registered trademarks and O2, Origin, Origin200, CrayLink, XFS, IRIS InSight,
Onyx2, POWER Series, Indigo2, and IRIX are trademarks of Silicon Graphics, Inc.
Indy is a registered trademark, used under license in the U.S. and owned by Silicon
Graphics, Inc. in other countries worldwide. Macintosh is a trademark of Apple
Computer, Inc., registered in the U.S.A. and other countries. IBM is a registered
trademark of International Business Machines Corporation. Windows and MS-DOS
are registered trademark of Microsoft Corporation. FrameMaker is a trademark of
Frame Technology Corporation. UNIX is a registered trademark in the United States
and other countries, licensed exclusively through X/Open Company, Ltd. PostScript
is a registered trademark of Adobe Systems, Inc.
FCC Warning
This equipment has been tested and found compliant with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Attention
This product requires the use of external shielded cables in order to maintain
compliance pursuant to Part 15 of the FCC Rules.
International Special Committee on Radio Interference (CISPR)
This equipment has been tested to and is in compliance with the Class A limits per
CISPR publication 22, Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment; Germany’s BZT Class A
limits for Information Technology Equipment; and Japan’s VCCI Class 1 limits.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Attention
Le présent appareil numérique n’émet pas de perturbations radioélectriques
dépassant les normes applicables aux appareils numériques de Classe A prescrites
dans le Règlement sur le interferences radioélectriques établi par le Ministère des
Communications du Canada.
TUV
geprufte
Sicherheit
R
NRTL/C
v
Contents
List of Figures xiii
List of Tables xvii
About This Guide xix
Where To Find More Information xxi
Origin200 Owner’s Guide xxii
Optional Documentation xxii
Online Reference (Manual) Pages xxiv
World Wide Web-Accessible Documentation xxiv
Release Notes xxv
InfoSearch xxv
Conventions xxvi
About the CD Software Media xxvi
Where to Go From Here xxvi
1. Overview of the Origin200 System 3
Installation Options: Tower and Rackmounting 6
Feature Summary 6
Logic Carrier 7
Main System Board 9
CPU Daughter Card 9
Module System Controller (MSC) 11
PCI Backplane and Expansion Slots 11
Memory 13
vi
Contents
Internal Drive Options and SCSI Channels 14
5.25-Inch Drives and Drive Bay 14
3.5-Inch Drives and Drive Bay 15
SCSI Channels and Channel Numbering 17
Serial Ports 17
AUX Port 18
Parallel Port 18
Ethernet Port 18
Power Supply 19
Air Flow and Fans 19
Physical and Environmental Specifications 20
Multiple Modules and Power Sources 20
2. Setting Up an Origin200 System 23
Choosing a Location For the Server 24
Putting the Pieces Together 26
Overview of the System Connectors and Ports 28
Safety Considerations 29
Assembling the Server 29
Installing 3.5-Inch Drives 30
Installing 5.25-Inch Drives 33
Attaching an Ethernet Networking Cable 42
Attaching the System Console 43
Connecting Two Origin200 Modules 44
Turning On the System 50
Logging In For the First Time 52
3. Installing an Origin200 System in a Rack 55
Overview 55
Installing the Mounting Hardware on the Chassis 57
Installing a Chassis In the Rack 60
Removing a Server From an Equipment Rack 64
Contents
vii
4. Using the Origin200 System 67
Front Panel Functions: Status LED, Power, Reset, NMI 68
Status LED 68
Front Power Switch 69
Using the Reset Button 69
Using the Nonmaskable Interrupt (NMI) Button 70
Turning the System On and Off 71
About the Master Power Switch and Front Power Switch 71
Turning On the System 72
Turning Off the System 75
Accessing Your Server Over the Web 78
Separating Two Modules 79
Using Another Computer or Workstation as the System Console 80
Using An IBM-Compatible Or Macintosh Computer As the System Console 80
Obtaining and Connecting the Correct Serial Adapter Cable 80
Setting Up and Starting the Terminal Emulator 82
Logging In To the Server 84
Using a A Silicon Graphics Workstation As the System Console 85
Obtaining the Correct Serial Cable 85
Checking for the Correct Software 86
Configuring the Workstation 86
Connecting the Serial Cable 88
Logging In To the Server 88
viii
Contents
Using the AUX Port and Module System Controller Commands 89
Attaching a Terminal Or Modem to the AUX Port 90
Using the Module System Controller 91
Entering Supervisor Mode 91
Setting the MSC Password 92
Checking the System Temperature 92
Checking and Setting the Fan Speed 92
Checking If the System Is On or Off 93
Powering the System On and Off 93
Causing the System To Power-On Automatically. 94
Resetting the System 94
MSC Error Messages 95
MSC Command Reference 95
Determining What Devices are Installed On Your Server 98
How Devices are Detected and Numbered 98
How to Use the Hardware Graph 98
Removing the System Cover and Chassis Access Door 101
Locking the System 104
Locking the Front Door 104
Locking the Chassis 104
Adjusting the Feet 106
5. Installing and Removing Memory 109
Handling Precautions 109
About Origin200 Memory 109
Installing Memory 110
Verifying That Installed Memory Is Recognized By The System 115
Removing Memory 116
6. Installing and Removing PCI Option Boards 125
Handling Precautions 125
Installing a PCI Option Board 126
Removing a PCI Option Board 133
Contents
ix
7. Installing and Configuring Peripherals 141
Installing, Removing, and Configuring 5.25-Inch Peripherals 141
About the 5.25-Inch Peripheral Bay 142
Configuring a 5.25-Inch Peripheral 144
Installing a 5.25-Inch Peripheral 144
Removing 5.25-Inch Peripherals 151
Installing, Removing, and Configuring 3.5-Inch Peripherals 157
About the 3.5-Inch Peripheral Bay 158
Configuring 3.5-Inch Peripherals 159
Installing a 3.5-Inch Peripheral 159
Removing a 3.5-Inch Peripheral 162
Verifying That A Drive Is Installed Correctly 165
Using Drives In the Origin200 Server 166
Attaching Serial Devices 168
Attaching Serial Cables 170
Attaching Serial (ASCII) Terminals 170
Connecting a Modem 173
Useful Serial Commands 174
8. Troubleshooting 179
Status LED Messages 179
Ethernet Status LED Messages 180
Checking the Power Supply 181
9. Replacing Internal Parts 185
Tools Required to Remove and Replace Components 185
Miscellaneous Fasteners 185
x
Contents
Removing and Replacing Internal Parts 186
Preparing the Origin200 for Servicing 187
Replacing the SCSI Backplane 189
Installing A New SCSI Backplane 190
Replacing Fans 190
Installing a New Fan 193
Replacing the Module System Controller 193
Installing a New Module System Controller 197
A. Connector Pinout Assignments 201
Serial Ports 202
Parallel Port 204
Ethernet Port 206
AUX Port 207
B. Cable Descriptions 209
Serial Cables 210
Printer/Character (ASCII) Terminal Cable 210
Modem Cable (Full-Handshake) 211
Origin200 to Indy and Indigo2 Cable (DB-9 to DIN-8) 212
Origin200 to O2, Onyx2, and IBM-Compatible (DB-9 to DB-9) 213
Origin200 to Onyx (DB-9 to DB-9) 214
Origin200 to Macintosh Cable (DB-9 to DIN-8) 215
AUX Port Cables 216
AUX Port Terminal Cable 216
AUX Port Modem Cable 217
217
C. Supported Terminals 219
Glossary 221
Index 227
Otros manuales para Origin200
1
Tabla de contenidos
Otros manuales de Servidor de Silicon Graphics
Silicon Graphics
Silicon Graphics UV 2000 Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C2005 2U Manual de usuario
Silicon Graphics
Silicon Graphics UV 300H Manual de usuario
Silicon Graphics
Silicon Graphics Altix XE340 Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C2112-4G3 Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C1000 Manual de usuario
Silicon Graphics
Silicon Graphics Rackable C1110-RP6 Manual de usuario
Silicon Graphics
Silicon Graphics 1400 Manual de usuario
Silicon Graphics
Silicon Graphics Altix XE320 Manual de usuario
Silicon Graphics
Silicon Graphics NAS MIS Manual de usuario
Silicon Graphics
Silicon Graphics Altix XE210 Manual de usuario
Silicon Graphics
Silicon Graphics InfiniteStorage 3500 Manual de usuario
Silicon Graphics
Silicon Graphics SGI 1200 Series Manual de usuario
Silicon Graphics
Silicon Graphics 1450 Manual de usuario
Silicon Graphics
Silicon Graphics SGI 1100 Manual de instalación y operación
Silicon Graphics
Silicon Graphics 1400 Manual de instalación y operación
Silicon Graphics
Silicon Graphics UV 3000 Manual de usuario
Silicon Graphics
Silicon Graphics 1450 Manual de usuario
Silicon Graphics
Silicon Graphics Origin 300 Manual de usuario
Silicon Graphics
Silicon Graphics InfiniteStorage 3000 Manual de usuario
