1. Before using the heater make sure that it is on a flat and stable
surface. Damage may occur if it is placed on an incline or
decline.
2. Then insert the plug into a socket-outlet.
3. Rotate the thermostat dial (Fig.c) clockwise to “MAX” position
and select the power setting on the power dial (Fig.d).
4. When your room reaches the desired temperature, slowly rotate
the thermostat dial counter-clockwise until the power indicator
light goes out. The thermostat can now be left at this setting. As
soon as the room temperature has dropped below the set
temperature, the unit will switch on automatically, until the set
temperature has been reached again. In this way the room
temperature remains constant with the highest energy
efficiency.
5. If you want to change the room temperature setting, rotate the
thermostat dial clockwise to raise the temperature, or
counter-clockwise to lower it.
6. This heater includes an overheat protection system that shuts off
the heater when parts of the heater are getting excessively hot.
7. To completely shut the heater off, turn thermostat to “Min” and
setting button to “off”, and unplug the heater from the
socket-outlet.
