Silent Witness SW010 Manual de usuario

FOR YOUR

SW010

Recording

indicator

Speed

GPS Ba ery

indicator

Microphone

Time & Date

Loop

Indicator

DigitalCamera

Automa!c balance

Mo"on

Detec#on

This picture shows the camera is Recording This picture shows the camera with the recording Paused

Picture 3

The le$side of the camera, you can %nd a power bu&on,

this is used to manually turn the camera ON and OFF

Picture 1

This is the GPS windscreen module, the power must be

inserted into this usb port to enable the gps op'on.

Picture 2

This is the top of the camera (from le(to right)

computer usb port -AV output - Microphone

AV Output - This is used to connect the camera to a television

that does not have the HDMI port, This lead is included in the

kit.

Picture 4

This is the external SD card slot, if you wish to upgrade your

memory this expansion slot can be used.

Takes up to a 32gb micro sd class 6

Picture 5

This port is used to connect your camera to the television

using the HDMI lead included in the kit.

RECORDING

This screen shows your device switched on and recording

The red ball in the top le)will pulse to show it is recording.

When the camera has been PAUSED this will now allow you

to enter the menu.

PRESS and HOLD the UP arrow key, the menu will appear

When in the menu, use the UP and DOWN arrow keys to

highlight the op ons and PRESS OK to enter thatop!on.

PAUSED RECORDING

This screen shows your device switched on and the recording

has been PAUSED.

You can PAUSE this device by pressing the OK

Video Resolu"on

Press OK to enter video resolu*on , and using the UP and

DOWN arrow keys make your selec+on and press OK to

to con%rm.

1920x1080 is the highest HD recording quality

VGA is the lowest recording quality

We recommend -1920 x 1080

Photo Size

This op,on allows you to alter the digital camera picture size

From 0.9 Megapixel to 4 Megapixel

We recommend -4 megapixel

Sharpness

This op-on Lets you alter the sharpness of the video and

digital Pictures,

We recommend this is set to AUTO

Contrast

This op.on lets you change the contrast of the video and

digital pictures.

We recommend this is set to AUTO

Flicker Rate

This op/on lets you change the 0icker rate of the device.

European countries use 60Hz .

If you are unsure please set this op1on to AUTO

Tv Type

If you want to connect your camera to a analogue television,

you may need to change this se2ng.

PAL is the most common type used in the UK

Please see page 3 picture 2 ofthe “quick guide”

Time Set Up

This op3on lets you set the date and 4me of the device.

Please note, that when the GPS is connected, the device will

obtain the 5me automa6cally from satellites.

Time Set Up Cont..

The 1st set of digits in yellow is the 7me zone, this has to be

correct for the GPS to obtain the 8me se9ngs.

Bri:sh standard ;me +00

Bri<sh summer =me +01

Use the UP and DOWN arrows to navigate and OK to con%rm

Time Set Up Cont…

When you press OK the yellow box will move across the

screen to the next se>ng.

Time Zone—Year—Month–Day—Hour—Minutes

Auto Power O#

This op?on lets you set a @mer to power down the camera

when the camera is removed from the power source.

When in the OFF posiAon the camera will remain on unBl the

baCery is depleted.

Date Time Display

This opDons stamps the data into the video %le.

So when playing the video %le back the date and Eme will be

displayed

Loop Se$ng

The Loop seFng feature allows the device to recycle the

memory card.

We recommend a 5 minute loop seGng, every 5 minutes the

camera will make a new video %le, when the card is full the

camera will automaHcally delete the oldest video and recycle

the recordings.

Please note in the OFF posiIon when the card is full the

camera %les will have to be deleted manually

Sensor Flip

This allows the camera to be installed 180 degrees so the

screen and camera are showing the correct way.

This funcJon is only used in certain installs

Mo%on Detect

This funcKon is used in a CCTV install, where the camera is in

sleep mode unLl the lens detects movement, when this

happens the camera wakes and starts recording.

This func&on is NOT used if the camera is being used as a

drive accident camera

Stamp

This funcMon allows more data to be inpuNed into the video

%le.

We recommend GPS DATA sothe speed and gps data is

stamped into the video %le along with the Ome and date

Video Record Mode

This funcPon lets you choose if the camera records

Video and audio or just video

Power O#Screen

When the device is switch on the screen can be set to auto-

maQcally switch oRand go into screensaver mode.

We recommend 1 minute , aSer 1 min the device will switch

oRthe screen so it does not distract you whilst driving.

If switched to the OFF seTng,the screen will remain on.

Driver Number

This funcUon allows a name-vehicle reg to idenVfy the

Use the UP and DOWN arrows to choose a LeWer or Number

and press OK to con%rm, this will then move to the next icon

on the screen.

G Sensor Precision

G Sensor is a shock sensor, which acXvates at front/side or

rear accident, it then locks the video %le for safe keeping.

This can be set from 2g up to 5g

We recommend this being setat 2g , this can be altered later

if required.

G Sensor Calibra'on

This funcYon needs to be run once installed in your vehicle,

This will calibrate the device, choose YES and keep the camera

and vehicle sZll, while the camera calibrates.

G Sensor Calibra(on Cont..

Please wait for this screen to calibrate

This will take only a few seconds

Choose Card

This camera comes with a 8GB onboard memory , but if you

would like to upgrade the card you can purchase a 32GB card

class 6 and install into the SD card slot as shown in picture 4

on page 2.

Then choose the OUTTER CARD in the menu.

Please see page 3 picture 4 in“quick guide”

GPS

To enable the GPS func[on on the camera the camera GPS

needs to be set to OPEN, if in the CLOSE posi\on the GPS will

not work.

Please see page 3 picture 1 inthe “quick guide”

Format

This func]on formats (deletes) all videos and photos on the

internal and external memory

Please remember to back up your data before using this

func^on

Firmware

This func_on gives informa`on about the %rmware version on

the camera

REVIEWING VIDEO AND PHOTOS

To view videos and photos stored on the device

In PAUSE mode PRESS and HOLD the DOWN arrow buaon

Use the UP and DOWN arrow keys to choose the video

File you wish to play.

PRESS the OK bubon to con%rm

To view the photos stored on the device

PRESS and HOLD the DOWN arrow key

To go back to the main screen,

PRESS and HOLD the DOWN arrow key

Then PRESS OK to resume recording

Tabla de contenidos

Otros manuales de Cámara de seguridad de Silent Witness

Silent Witness

Silent Witness V25 ArmorDome Manual de usuario

Silent Witness

Silent Witness SW2200 Manual de usuario

Silent Witness

Silent Witness V60 Night Hawk Manual de usuario

Silent Witness

Silent Witness Night Hawk SWX45 Manual de usuario

Silent Witness

Silent Witness SW021 Manual de usuario

Silent Witness

Silent Witness SW001 Manual de usuario

Silent Witness

Silent Witness MagnaView V28R Manual de usuario

Silent Witness

Silent Witness SWX80 Manual de usuario

Silent Witness

Silent Witness SWC40 Series Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario