Silencer 56SL Manual de usuario

UM_FULL_56SL_REV_A 2

Contents

CHANGING THE BATTERY............................................................................................................................................ 3

STANDARD LCD ICON CONFIGURATIONS ................................................................................................................. 4

LCD TRANSCEIVER REMOTE CONTROL OPERATION .............................................................................................. 4

Vehicle’s Status Check ................................................................................................................................................ 4

Second Vehicle Security Operation ............................................................................................................................. 4

Voltage Check.............................................................................................................................................................. 4

Melody / Vibration Mode .............................................................................................................................................. 4

Power Saver Mode ...................................................................................................................................................... 5

Button Lock Mode........................................................................................................................................................ 5

REMOTE TRANSMITTER OPERATION......................................................................................................................... 5

CHIRP INDICATORS....................................................................................................................................................... 6

PARKING LIGHT ............................................................................................................................................................. 6

LOCK............................................................................................................................................................................... 6

Silent Locking............................................................................................................................................................... 6

UNLOCK..........................................................................................................................................................................6

Silent Unlocking ........................................................................................................................................................... 6

Pathway Illumination.................................................................................................................................................... 6

Two-Steps Door Unlock ............................................................................................................................................... 6

PANIC FUNCTION. ......................................................................................................................................................... 6

VALET MODE ................................................................................................................................................................. 7

Enter Valet Mode ......................................................................................................................................................... 7

Exit Valet Mode ............................................................................................................................................................ 7

Remote Valet ............................................................................................................................................................... 7

CAR LOCATOR............................................................................................................................................................... 7

DRIVER PAGING / LOST & FOUND............................................................................................................................... 7

DOME LIGHT CONVENIENCE SUPERVISION ............................................................................................................. 7

IGNITION CONTROL DOOR LOCK/UNLOCK ............................................................................................................... 7

TRUNK RELEASE (AUX 1) OUTPUT............................................................................................................................. 8

AUX 2 TIMER CONTROL OUTPUT................................................................................................................................ 8

SECOND CAR OPERATION........................................................................................................................................... 9

CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS ................................................................................ 9

STOP THE MELODY SOUND......................................................................................................................................... 9

ILLUMINATE LCD DISPLAY............................................................................................................................................9

OUT OF REMOTE COTROL RANGE............................................................................................................................. 9

REMOTE START OPERATION

TO REMOTE START THE VEHICLE............................................................................................................................. 10

PROGRAMMABLE SAFETY START ............................................................................................................................ 10

RUNNING TIME EXTENDER......................................................................................................................................... 11

OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START ................................................................. 11

TEMPORARY STOP MODE .......................................................................................................................................... 11

TO TURN OFF THE REMOTE START.......................................................................................................................... 11

DISABLING THE REMOTE START SYSTEM............................................................................................................... 12

TIMER START OPERATION ......................................................................................................................................... 12

Activate Timer start on / off............................................................................................................................................ 12

DAILY TIMER START ................................................................................................................................................ 12

Activate Daily Timer start ........................................................................................................................................... 12

TURBO TIMER MODE .................................................................................................................................................. 13

To activate Turbo Timer Mode.................................................................................................................................... 13

Cancelling Turbo Timer Mode........................................................................................................................................ 13

SHUTDOWN / STARTUP DIAGNOSTICS .................................................................................................................... 13

Group 1...................................................................................................................................................................... 14

Group 2...................................................................................................................................................................... 14

LCD REMOTE CONTROL PROGRAM SETTING ........................................................................................................ 15

UM_FULL_56SL_REV_A 3

A. CHANGING THE BATTERY

BATTERY REPLACEMENT: SLRF90A

The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens

A icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds

to indicate the power is back up on the transmitter.

BATTERY REPLACEMENT: SLRF751

The One-way remote is powered by one CR2032 Battery. To replace battery use a coin or small at blade

screwdriver to carefully pry apart case

Small Flat Blade

Screwdriver or Coin

UM_FULL_56SL_REV_A 4

B. STANDARD LCD ICON CONFIGURATIONS:

The lock icon will be displayed when

the door are locked.

The unlock icon will be displayed when the

door are unlocked.

System trigger Valet Mode

All the function shall be temporally on hold.

Trunk Release Panic mode

Engine Cranking

Your vehicle engine cranking by remote control.

Engine Running

Your vehicle’s engine is running

Timer Control Start

Engine starts automatically every

2 or 3 hours

Driver paging

22nd Car Operation Button Lock (Icon on)

Remote Transmission

You are transmitting the signal to control unit.

In – Range Indicator

You are within the range of the remote

control.

Low Battery Power Save

Melody Mode Vibration Mode

Alarm Clock Parking Meter

Reminder when time is up for parking

C. LCD TRANSCEIVER REMOTE CONTROL:

1. Press the Fbuttons the number of times corresponding to the Level you wish to select;

the LCD will display LEVEL number ( )

2. Press the button while LEVEL number text is still on to perform the command.

Button Direct Access Fx 1 Level 1 Fx 2 Level 2 Fx 3 Level 3

1.0 sec. Silent Arming Vehicle’s

Status Check

Disarm & Unlock or

Silent Disarming Remote Valet ON / OFF Car 1 / Car 2 operation Voltage Check

Trunk Release

(Aux 1) Aux 2

Remote Start or Running

Time Extender Timer Start ON / OFF Daily Timer Start

ON / OFF

F 1 sec Melody /

Vibration Mode

Power Save Mode

ON / OFF

Button Lock

ON / OFF

Vehicle’s Status Check: Press Fbutton rst then press and hold buttons for 1 second and release.

The LCD remote transceiver will display the current status of the vehicle.

Second Vehicle Security Operation: Press Fbutton 2 times rst then press and release button to enter Second

Vehicle Security Mode, Under this mode press button to select CAR 2 operation, The 2icon and display

on the LCD screen or CAR 1 operation and the 2icon will disappear and display on the LCD screen.

Voltage Check: Press Fbutton 3 times rst then press and release button. The LCD remote transceiver will display

the voltage condition of the vehicle.

Melody / Vibration Mode: Press F button rst then press and hold F buttons for 1 seconds until the beep conrms,

then release the button to enter Melody / Vibrating Mode, Under this mode press and hold Fbutton for 1 seconds to

select Melody Mode icon will display) or Vibration Mode icon will display) or both and icon will display).

UM_FULL_56SL_REV_A 5

Power Saver Mode: Press Fbutton 2 times rst then press and hold F buttons for 1 seconds until the beep conrms to

enter Power Saver Mode, Under this mode press and hold Fbutton for 1 seconds until the beep conrms, then release

the button to enable (The SAVE icon will display) or disable Power Save Mode (The SAVE icon will disappear).

While in Power Save Mode the LCD transmitter will not look for any incoming signals from main unit until a button is pressed.

Button Lock Mode: Press Fbutton 3 times rst then press and hold Fbuttons for 1seconds until the beep conrms,

then release the button to enter Button Lock Mode, Under this mode press and hold Fbutton for 1 second to enable

(icon will display) or disable Button Lock Mode (The icon will disappear)., the remote control will beep/vibrate

2 times when a button is pressed indicating it is locked.

EXIT: Wait 10 seconds, or press the other buttons to leave the setting except the Fbutton.

D. REMOTE TRANSMITTER OPERATION:

Transmitter

Button System Function Remark

Lock Doors Tap the Lock button for a half second

Silent Lock Doors Press and hold for 1.0 seconds

Panic Function Press and hold for 3 seconds to Activate or

Deactivate panic function

Car Locator Press when the system Locked

Unlock Doors Tap the Unlock button for a half second

Silent Unlock Doors Press and hold for 1.0 seconds

- Two Steps Door Unlock (optional) Press twice within 3 seconds

1.0sec. - Silent Two Steps Door Unlock Press and hold the button for 1.0 seconds

rst then press button.

Trunk Release (Aux 1) Press and hold for 3 seconds

Activate or Deactivate the Remote Start Press button once.

- Press twice if set to start safety mode.

Running Time Extender Press and hold for 2 seconds

- Timer Start Tap the button rst then tap button.

+ Turbo Mode Press together & release.

+ Aux 2 Timer Output Press together & release.

+ Switch Code for 2nd Car Operation Press together & release.

+ Shutdown Diagnostic Press together & release

Level Setting.

Light up he LCD indicator and Function Setting Press and hold for 1 second

LCD Remote Programming Setting Press and hold for 3 seconds

UM_FULL_56SL_REV_A 6

E. CHIRP INDICATION PARKING LIGHT

Chirp Function

Parking light Function

1 Chirp Lock 1 Flash Lock

2 Chirps Unlock 2 Flashes Unlock

6 Chirps Car Locator 12 Flashes Car Locator

Constant On Under Remote Start

F. LOCK

1. Press the button on the transmitter.

2. The system will lock the doors (if connected), and the horn chirps and parking lights ash once indicating

that the keyless entry system is now locked. The icon and beeps play to conrm. If Valet Mode* is ON,

the doors lock and the +icon and tone play on the LCD transceiver.

SILENT LOCKING: Press and hold the transmitter buttons for 1.0 second. The system will lock the doors.

No chirp sound will be heard and the lock conrmation will be through the vehicles parking lights only.

G. UNLOCK

1. Press the button on the transmitter.

2. The horn will chirp twice and the parking lights will ash twice indicating that the system is now unlocked.

The icon and beeps play to conrm. If Valet Mode* is ON, the doors unlock and the +icon

and tone play on the LCD transceiver.

3. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon unlocking.

(Note: Power door locks and dome light must be installed with the keyless entry system.)

SILENT UNLOCKING:Press and hold the transmitter buttons for 1.0 second. This will unlock your doors.

No chirp sound will be heard and the unlock conrmation will be through the vehicles parking lights only,

PATHWAY ILLUMINATION: When receiving an unlock signal, this feature will turn the parking lights “ON” for 30

seconds and for 10 seconds upon the lock signal. (See feature bank 2-04)

TWO-STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver’s door only when disarming

the keyless entry system.

• Pushing the button a second time within 3 seconds will unlock the other doors.

H. PANIC FUNCTION:

Press and hold the button for 3 seconds to activate the personal protection alarm and the icon will display on

the LCD screen. During panic mode, the normal function of the transmitter buttons will be suspended. The transmitter

and buttons can be used to lock and unlock the door (if the option is installed). To stop the alarm, press and hold the

button on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds.

UM_FULL_56SL_REV_A 7

I. VALET MODE:

When servicing or loaning your vehicle to others, the system should be placed in Valet Mode.

Valet Mode prevents the system from remote starting functions.

Enter Valet Mode:

1. Under the system unlocked, turn ignition “ON/ OFF/ ON”

2. Press and hold valet switch for 2 seconds until the LED turns “ON” solid and icon will show on the LCD.

The LED will remain on as long as the system is in Valet Mode.

Exit Valet Mode:

1. Turn ignition “ON/OFF/ON”.

2. Push and hold the valet switch for 2 seconds. The LED will turn off indicating the system is exiting the ValetMode.

Remote Valet

Under the system unlocked, press the Fbutton 1 time rst then press the button. The parking lights will ash once,

the remote will read “Valet On” and icon will show on the LCD.

Exit: Repeat this process to exit valet mode. The parking lights will ash twice, remote read “Valet Off”

and icon will disappear conrming valet mode is disabled.

J. CAR LOCATOR:

Under the system Locked, press the button to activate the car locator function.

The horn will chirp 6 times. The parking light will ash 12 times, assisting you in easily locating your car.

K. DRIVER PAGING / LOST & FOUND. ((For two-way transceiver operation only)

This feature is useful in the event that someone wants to page the driver of a parked vehicle or

someone cannot nd his LCD remote transceiver. Under the ignition switch “OFF” condition,

press and hold the valet switch for 2 seconds to page the driver. One chirp sound is emitted from

the vehicle, a paging melody will continue to sound and the icon will ash on the LCD screen.

L. DOME LIGHT CONVENIENCE SUPERVISION

The keyless entry system has a unique feature that will turn on your vehicle dome light as follows:

1. Upon unlocking, the interior light will remain on for 30 seconds.

2. If the activated the panic, the interior light will ash for the same duration as the horn.

Note: Turning on the ignition switch or locking the alarm will turn off the dome light.

M. IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)

If the vehicles door locks have been interfaced to the keyless entry system, the system will automatically

lock the vehicle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition

is turned “OFF”. (Default setting is “OFF”)

UM_FULL_56SL_REV_A 8

N. TRUNK RELEASE (AUX 1 / CH 1) OUTPUT

Press and hold the button on the transmitter for 3 seconds to remotely control the

trunk release and the icon will show on LCD screen.

Aux 1 is a user-programmable timer output. You may program the built-in timer to send a

ground signal for any time duration from 1 second to 90 seconds. For instance, this timer

output may be used to turn on the headlights, power windows or sunroof.

Programmable Output:

Trunk (1 second pulse) / Aux 1 Latch / L Aux 1 Latch Reset with Ignition / Aux 1 Flex

(Aux 1 Control by Remote / Control by Lock / Control by Unlock / Control by Lock & Unlock / Control by Remote Start)

Latch: when the Aux 1 command is received the output will turn ON and remain ON and

the text and tones play to conrm until the command is received again and

text will be displayed on the LCD screen.

Latch/Reset/Ignition: when the Aux 1 command is received the wire will turn ON and remain

ON until the ignition is turned ON & OFF t or he command is received again and

text will be displayed on the LCD screen.

Flex: when the Aux 1 command is received the output will turn ON for the programmed

time duration (default 1sec.).

Aux (CH 1) Output Control:

1. Control by Remote: This option allows Aux 1 to be triggered by remote control command.

Press and hold buttons for 3 seconds to activate

Aux 1 function and. the text and tones play to conrm

2. Control by Lock: The Aux 1 output will activate for the lock command. If you send a

second lock command it will not trigger Again.

3. Control by Unlock: The Aux 1 output will activate for the unlock command. If the vehicle is

already in the unlocked state and you send a second unlock command it will not trigger the output.

4. Control by Lock and Unlock: the Aux 1 output will activate for the lock & unlock commands.

5. Control by Remote Start: the Aux 1 output will activate for any Remote Start activation.

O. AUX 2 (CH 2) TIME CONTROL OUTPUT (Optional Feature)

Press Fbutton rst then press button or press buttons +simultaneously to activate

Aux 2 function and. the text and tones play to conrm.

Aux 2 is a user-programmable timer output. You may program the built-in timer to send a ground signal

for any time duration from 1 second to 90 seconds. For instance, this timer output may be used to turn

on the headlights, power windows or sunroof. (Factory defaults setting at 1 second output.)

Programmable Output: Aux 2 Latch / Aux 2 Latch Reset with Ignition / Aux 2 Flex

(Aux 2 Control by Remote / Control by Lock / Control by Unlock / Control by Lock & Unlock / Control by Remote Start)

UM_FULL_56SL_REV_A 9

P. SECOND VEHICLE SECURITY OPERATION.

You can be utilized to control a second vehicle’s keyless entry system. To program the

remote control transmitter to a second vehicle, Press and hold the + buttons

2 seconds to select car 2 or car 1 operation.

4 Button Remote Transmitter:

For Car 2: When the LED start 2 pause ash then release buttons.

For Car 1: When the LED start 1 pause ash then release the buttons.

LCD Remote Transceiver:

For Car 2: When 2 icon and the text show on the LCD display then release the buttons.

Under Car 2 mode, the 2 icon will ash.

For Car 1: When 2icon disappears and the text show on the LCD display then release the buttons.

Q. CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS:

The ashing warning message icons in the LCD display will clear and reset when the transmitter

is used to lock the vehicle. Also, Locking then Unlocking the system will clear the ashing icons.

R. STOP THE MELODY SOUND:

Press any button on the LCD remote transmitter to stop the melody sound only.

S. ILLUMINATE LCD DISPLAY:

Press and hold the Fbutton for 1 second and the LCD indicator will light up

T. OUT OF REMOTE CONTROL RANGE:

If the icon disappears to indicate the remote failed to receive a command conrmation.

UM_FULL_56SL_REV_A 10

WARNINGS

As with any product that performs automatic functions, there are certain

safety precautions that you must practice and be aware of.

1. Keep the transmitter out of children’s reach.

2. Do not leave anyone in the vehicle while running on remote control.

3. Alert servicing personnel that the vehicle can be started automatically.

4. Do not start the vehicle by remote while it’s in an enclosed area or garage.

5. Always apply the parking brake and lock the vehicle as you exit the vehicle.

6. The vehicle windows must be rolled up.

7. Should the unit malfunction, disconnect the fuse until the problem is corrected.

8. The use and operation of this system is the sole responsibility of the operator.

9. Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.

10. It is not safe to remote start the vehicle if the vehicle is parked on a steep incline.

REMOTE START OPERATION

A. To Remote Start the Vehicle

When you want to start your vehicle:

1. Press the button once on the transmitter.

2. The parking light will activate to indicate the remote start has received the signal.

3. The engine will start in approximately 5 seconds and the icon will blink to indicate that the engine is starting,

the icon will show on the LCD screen, the parking lights will turn on. While the vehicle is running, the

icon, the run time start countdown text and tones play to conrm. The countdown timer based on based

on the 3, 10, 20, 30 or 45 minute run time set installation center. (See feature bank 3-04 setting).

4. The vehicle will run for a programmable 3 to 45 minute cycle before shutting down. When the countdown

timer is off or press button, the system will be shut down, and the icon will disappear and tones

play on the LCD screen.

5. The vehicle refused to start running after 3unsuccessful attempts.

6. If Remote Start fails to start, the parking light will fast ash 4 times and text

and a fault tone play on the LCD transceiver.

B. Programmable Safety Start

By default, your Silencer remote starter is programmed to start/stop after pressing the button 1 time.

This default setting can be re-programmed to require 2 presses - .

This setting is known as “Child Safety Mode”.

Contact your installer to reprogram this feature if needed.

Tabla de contenidos

Otros manuales de Arranque remoto de Silencer

Silencer

Silencer SL-52FM Manual de usuario

Silencer

Silencer 65SL Manual de usuario

Silencer

Silencer 55SL Manual de usuario

Silencer

Silencer 75SL Manual de usuario

Silencer

Silencer 53SL Manual de usuario

Silencer

Silencer SL-51X Manual de usuario

Silencer

Silencer SL- 51 Manual de usuario

Silencer

Silencer 55SL Manual de usuario

Silencer

Silencer SL-51X Manual de usuario

Manuales populares de Arranque remoto de otras marcas

AstroStart

AstroStart 803U Manual de usuario

Durite

Durite 0-649-20 Manual

EINHELL

EINHELL BT-PS 1000 Manual

Linear

Linear ACCESS AK-21 Especificaciones técnicas

Soundstream

Soundstream TARANTULA RS.2 Manual de usuario

Jaycar Electronics

Jaycar Electronics MB3752 Manual de usuario

Ultra Start

Ultra Start 72 Series Manual de usuario

ADS

ADS FLASHLOGIC FLRSVW1 Manual de usuario

Selecta

Selecta JS012 Manual de usuario

Black Widow Security

Black Widow Security BW RAS 400 Manual de usuario

Vector

Vector Power City DK080706 Suplemento

Code Alarm

Code Alarm CA-535 Manual de usuario

Ozito

Ozito OJS-800 Manual de usuario

Profi-Partner

Profi-Partner 46387 Manual de usuario

EZ STARTER

EZ STARTER EZ-45 Manual de usuario

Viper

Viper 4204 Manual de usuario

Essex Electronics

Essex Electronics KE-1701 Manual de usuario

EINHELL

EINHELL EGS 3600 Manual