EN
EN - 6 EN - 7
ENGLISH
those supplied or recommended is prohibited.
12. This appliance is intended for household use only and for processing
common household ingredients. Do not use the appliance for any
purpose other than that for which it is intended. The appliance is not
intended for commercial or laboratory use.
13. Do not use the appliance outdoors.
14. Before connecting the fork of the power cord to a power outlet, make
sure that the voltage listed on the power cord's rating plate matches the
voltage in your power outlet. Plug the power cord plug into a properly
grounded outlet. Do not use extension cords or plug adapters.
15. Unwind the power supply completely before plugging it in.
16. Do not let the power cord hang over the edge of a table or countertop,
touch hot surfaces, or become tangled. Do not place heavy objects on
the power cord.
17. To prevent electric shock, do not immerse the appliance, power cord or
plug in water or other liquid.
18. Do not touch the appliance, the power cord or the plug with wet or
damp hands.
19. We recommend connecting the appliance to a separate electrical circuit.
20. Always place the appliance on a stable, level and dry worktop at a
sufcient distance from the mains socket. Vibrations during operation
may cause unwanted movement of the appliance.
21. Do not place the appliance on or near heat sources such as an oven or
stove.
22. Do not use more than one type of attachment at the same time.
23. This appliance is not intended to be controlled by an external timer,
programmer, etc.
24. Ensure that the appliance is correctly assembled and that the arm is in
a horizontal position before switching on the appliance. The appliance is
equipped with a safety lock that prevents it from starting if the arm is not
folded down correctly.
25. This appliance is designed to process 1 kg of our in one batch. Do not
use it to process large quantities of our. We recommend dividing the
larger quantity into smaller portions.
26. The recommended maximum operation of the appliance under normal
load is 5 minutes. Do not use the appliance continuously for more than 10
minutes. Allow the appliance to cool for at least 10 minutes before further
processing.
27. Do not run the appliance empty. There's a risk of damage!
28. Do not tilt the arm while the appliance is in operation. There's a risk of
damage!
29. Regularly check the condition of the raw materials being processed.
If it is necessary to wipe down the walls or attachment, rst switch off
the appliance and disconnect it from the power supply. Wait for the
rotating parts to come to a complete stop. Unscrew the arm and use the
squeegee to wipe the sides of the container or the attachment.
30. If a foreign object falls into the container, switch off the appliance and
disconnect it from the power supply. Wait for the rotating parts to stop
