Signal WS6980 Manual de usuario
USER’S MANUAL
1
English
CONTENTS
1. GUIDE ..............................................................................................................2
1.1 IMPORTANT SAFETY INSTRUCTIONS ..................................................................................2
1.2 UNPACKING ..................................................................................................................................2
1.3 PRODUCT OVERVIEW& ILLUSTRATION ..............................................................................3
1.4 INSTALLATION OF METER .......................................................................................................4
2. OUTLINE ..........................................................................................................5
3. THE MENU OSD INSTRUCTION ......................................................................6
3.1 DVBS2 ...........................................................................................................................................6
3.2 DVBT2 ...........................................................................................................................................9
3.3 DVBC ...........................................................................................................................................10
3.4 SPECTRUM ...................................................................................................................................11
3.5 LOOP SEARCH............................................................................................................................ 12
3.6 OTHERS ........................................................................................................................................ 12
3.7 SYSTEM SETTING......................................................................................................................16
4. TECHNICAL SPECIFICATION ......................................................................... 18
5. TROUBLE SHOOTING ....................................................................................20
2
1. GUIDE
1.1 IMPORTANT SAFETY INSTRUCTIONS
Thank you for choosing our product. Before installation, we would like to
remind you some notes, which is very important for operating safely and
properly, as follows:
• Be sure to read this user manual before starting your operation.
• You must install the dish with correct direction and angle. If the dish is not
working properly, contact your local dealer.
• When the unit is suddenly moved to a hot area from a cold area, it may
cause some problems. In that case, turn o the power, and turn on again
after 1-2 hours.
• Keep meter placed in clean space with sucient ventilation.
• Do not cover the meter with or place it on a unit that emits heat.
• Clean the case by a soft cloth with a little washing liquid.
• Do not remove the cover.
• Do not let the unit exposed to extreme heat, cold or humid conditions.
• No liquids or any other materials to come inside of the unit.
1.2 UNPACKING
Open the package and make sure it includes all below items, if any missing,
please contact the reseller for replacement.
1. Digital Satellite Meter 8. BNC-Connector
2. User’s manual 9. Optical fibre connector
3. AV cable
4. Car charger cable
5. Power adaptor
6. Carrying bag
7. DC 12V connect line
NOTE: Please refer to our actual configuration.
3
English
1.3 PRODUCT OVERVIEW& ILLUSTRATION
NO Description FUNCTION
1 LNB In Connect to satellite cable
2 ANT IN Connect to antenna
3 DC OUT DC 12V output for extern equipment
4 Optical fiber port Connect optical device
5 Power Switch Turn on/o meter
6 HDMI IN Use HDMI cable to connect for HDMI IN
7 AV IN Connect to AV port for meter
8 HDMI OUT Use HDMI cable to connect for TV
9 AV OUT Connect to AV port for TV
10 USB USB port for software upgrading or multimedia playing
11 DC IN Connect to power adaptor
12 Torch LED Night lighting
13 Speaker Speaker integrated
14 Power Power indicator light
15 H/V Vertical /Horizontal polarization voltage output light
16 22kHz 22kHz indicator light
17 LOCK Signal lock indicator light
18 ANT Antenna power key
19 CHG (Note1) Charger indicator light
20 AV-S AV IN/OUT switch key
21 F1 Auxiliary function key
22 F2 Auxiliary function key
23 F3 Auxiliary function key
24 F4 Auxiliary function key
4
NO Description FUNCTION
25 Red & TTXT Red KEY &Teletext interface
26 Green & SUBT Green key & Subtitle interface
27 Orange &TV/R Orange key & TV and radio switch
28 BLUE &AUDIO Blue key & Audio interface
29 NEVIGATION KEY Volume Control or move cursor, channel or change,
confirm etc
30 MENU Show the main menu on the screen or jump back to
previous menu in sub-menu setting conditions
31 EXIT Escape from present menu and save the settings
32 INFO INFO key
33 MUTE MUTE
34 0-9 Number key to select channels or enter programming
35 LCD TFT LCD Screen
36 When power on the meter ,displays the battery level
37 Battery Removable Battery
Note1: When the battery charged sucient, the charge indicator is going out. When
the battery is insucient, indicator flashing.
1.4 INSTALLATION OF METER
5
English
2. OUTLINE
• 7 Inch High Definition TFT LCD Screen
• Fully DVB-S/S2/T/T2/C, MPEG-2/MPEG-4 compliant
• MPEG-2 / H.264 / H.265Hardware decoding
• Digital meter for signal strength and quality
• Constellation analyzer
• Spectrum analyzer
• Supports scan of Auto,Blind, Manual or NIT
• Sound and Light Alarm for Locking Signal
• Auto Calculate Angle of AZ ,EL
• Supports DISEQC 1.0/1.1/1.2, Unicable, 0/22kHz Tone
• Speaker Integrated
• Support both AV out and AV in
• Support both HDMI out and HDMI in
• Optical Power measurement
• LNB short protect
• 7.4V/5000mAh LiIon Battery Included
• Software upgrade via USB port
• Easy to carry
6
3. THE MENU OSD INSTRUCTION
If you have installed and connected the cables to the receiver, pressing MENU
to display the Main Menu.
• DVB-S2
• DVB-T2
• DVB-C
• Spectrum
• Loop Search
• Others
• Multimedia
• System Setting
Press the keys of YZAB to move the cursor up or down in the menu
interface, then use OK to confirm a selection.
3.1 DVB-S2
Select DVB-S2, then press OK into the Satellite Find.
3.1.1 SATELLITE
Press AB key into the satellite list. Use
YZ key to move the cursor, then press
OK to select the satellite you want.
7
English
3.1.2 LNB TYPE
There are 4 types you can select: C Band/Ku Band/Unicable/DCSS.
3.1.3 LNB FREQUENCY
Press AB key to switch LNB frequency you want.
3.1.4 TRANSPONDER
Press AB key into the TP list. Use YZ key to
move the cursor then press OK to select the
TP you want.
3.1.5 FREQUENCY
Frequency of the current transponder, input the value by using the number
keys.
3.1.6 SYMBOL RATE
Symbol rate of the current transponder, input the value by using the number
keys.
3.1.7 POLARISATION
Press AB key to change vertical or horizontal of polarization.
3.1.8 22KHZ
Press AB key to turn on or o 22kHz TONE Switch.
3.1.9 DISEQC MODE
Press AB key to set the type of port as None/DiSEqC1.0/1.1.
3.1.10 DISEQC TYPE & INPUT
In C/Ku Band mode:
we can press A B key to set DiSEqC 1.0/1.1 as A/B port, and set Tone Burst
Mode as NONE/Tone Burst A/B.
In Unicable mode:
we can press A B key to switch IF Index from 1
to 8, or use number key to modify IF Freq, and
then press A B key to select A/B as Sat
Position.
8
In DCSS mode:
There are 3 more options: Channel PIN/
Committed Switch/UnCommitted Switch.
According to your needs to modify these
parameters.
3.1.11 LNB POWER
Press AB key to Switch LNB Power ON/OFF.
3.1.12 BEEP TONE
Press AB key to Switch beep tone ON/OFF. If we open it, the beep of lock
alarm will open when we enter into the search screen.
3.1.13 QUICK SEARCH
When parameters have been set done, press
OK into quick search. There will have some
signal information displayed on the screen.
• Scan: Press the red key to search the
current TP.
• Auto Scan: Press the green key to auto blind
search the current satellite.
9
English
• S/Q: Press the orange key to enlarge showing
of the signal strength and quality.
• Constellation: Press the blue key into the
constellation.
3.2 DVB-T2
Select DVB-T2, then press OK into the Scan
Setup.
3.2.1 COUNTRY
Press AB key to change the default country.
3.2.2 CHANNEL NO
Press AB key to change the channel number.
3.2.3 FREQUENCY
Frequency of the current channel, input the value by using the number keys.
3.2.4 BANDWIDTH
Press AB key to change the bandwidth, we can select 5, 6, 7 or 8M.
3.2.5 MODE
Press AB key to change the DVB standard, we have there types including
T/T2/T+T2, you can select one you want.
Tabla de contenidos
Otros manuales de Instrumento de medición de Signal
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario