SIGLENT TECHNOLOGIES SSA3000X-R Manual de usuario

1 Quick Guide

SSA3000X

SSA3000X Plus

SSA3000X-R

SVA1000X

Spectrum Analyzer

Quick Guide

QG0703P-E02A

Trademark Information

SIGLENT is the registered trademark of SIGLENT TECHNOLOGIES CO., LTD

Declaration

⚫SIGLENT products are protected by patent law worldwide

⚫SIGLENT reserves the right to modify or change parts of or all the specifications

or pricing policies at company’s sole decision.

⚫Information in this publication replaces all previously corresponding material.

⚫Information in this publication covers all SSA and SVA series analyzers products,

some models may have different parameters, please refer to their datasheets.

⚫Any way of copying, extracting or translating the contents of this manual is not

allowed without the permission of SIGLENT.

⚫SIGLENT will not be responsible for losses caused by either incidental or

consequential in connection with the furnishing, use or performance of this

manual as well as any information contained.

Product Certification

SIGLENT guarantees this product conforms to the national and industrial standards in

China as well as the ISO9001: 2008 standard and the ISO14001: 2004 standard.

Other international standard conformance certification is in progress.

Quick Guide 1

Carefully read the following safety precautions to avoid any personal injury or damage to the

instrument and any products connected to it. To avoid potential hazards, please use the

instrument as specified.

Use Proper AC Power Line

Only the power cord designed for the instrument and authorized by local country should be used.

Ground the Instrument

The instrument is grounded through the protective earth conductor of the power line. To avoid electric

shock, please make sure the instrument is grounded correctly before connecting its input or output

terminals.

Connect the Probe Correctly.

If a probe is used, do not connect the ground lead to high voltage since it has isobaric electric potential

as the ground.

Look Over All Terminals’ Ratings

To avoid fire or electric shock, please look over all ratings and sign instruction of the instrument. Before

connecting the instrument, please read the manual carefully to gain more information about the ratings.

Use Proper Overvoltage Protection

Make sure that no overvoltage (such as that caused by a thunderstorm) can reach the product, or else

the operator might be exposed to danger of electrical shock.

Electrostatic Prevention

Operate the instrument in an electrostatic discharge protective area environment to avoid damages

induced by static discharge. Always ground both the internal and external conductors of the cable to

release static before connecting.

Maintain Proper Ventilation

Inadequate ventilation may cause increasing of the instrument’s temperature, which will eventually

damage the instrument. So keep well ventilated and inspect the intake and fan regularly.

Avoid Exposed Circuit or Components

Do not touch exposed contacts or components when the power is on.

Do Not Operate Without Covers

Do not operate the instrument with covers or panels removed.

2 Quick Guide

Use proper Fuse.

Use only the specified fuse.

Keep Product Surfaces Clean and Dry.

To avoid the influence of dust and/or moisture in the air, please keep the surface of the device clean

and dry.

Do Not Operate in Wet Conditions.

In order to avoid short circuiting to the interior of the device or electric shock, please do not operate the

instrument in a humid environment.

Do Not Operate in an Explosive Atmosphere.

In order to avoid damage to the device or personal injury, it is important to operate the device away

from an explosive atmosphere.

Terms in this Manual. These terms may appear in this manual:

WARNING

Warning statements indicate the conditions or practices that could

result in injury or loss of life.

CAUTION

Caution statements indicate the conditions or practices that could

result in damage to this product or other property.

Terms on the product. These terms may appear on the product:

DANGER Indicates direct injuries or hazards that may happen.

WARNING Indicates potential injuries or hazards that may happen.

CAUTION Indicates potential damages to the instrument or other property that may happen.

Symbols on the product. These symbols may appear on the product:

Hazardous Protective Earth Warning Test Power Switch

Voltage Terminal Ground

Quick Guide 3

Inspect the shipping container

Keep the damaged shipping container or cushioning material until the contents of the shipment have

been completely checked and the instrument has passed both electrical and mechanical tests.

The consigner or carrier will be responsible for damages to the instrument resulting from shipment.

SIGLENT will not provide free maintenance or replacement.

Inspect the instrument

If the instrument is found to be damaged, defective or fails in electrical or mechanical tests, please

contact SIGLENT.

Check the accessories

Please check the accessories according to the packing list. If the accessories are incomplete or

damaged, please contact your SIGLENT sales representative.

Figure 1 Front View

4 Quick Guide

Figure 2 Top View

Adjust the supporting legs properly to use them as stands to tilt the analyzer upwards for stable

placement as well as easier operation and observation of the instrument display.

Figure 3 Before Adjusting Figure 4 After Adjusting

The analyzer accepts 100-240V, 50/60Hz or 100-120V 400Hz AC power supply. Please use the

provided power cord to connect the instrument to the power source as shown in the figure below.

Before powering on, make sure the analyzer is protected by a fuse.

Figure 5 Power Cord Connection

The Plug

Fuse holder

Quick Guide 5

Figure 6 Front Panel

Table 1 Front Panel Description

NO.

Description

NO.

Description

User Graphical Interface, touch support

RF Input, VNA port 2(SVA)

Menu Control Keys

TG Output, VNA port 1(SVA)

Function Keys

3.5 mm Earphone interface

Knob

USB Host

Numeric / Letter Keyboard

Power Switch

Arrow Keys

Figure 7 Function Keys area

6 Quick Guide

Table 2 Function keys description (For Spectrum Analyzer Mode)

Control Keys

Description

Frequency

Set the parameters of frequency, and Peak→CF, CF→Step.

Span

Set the parameters of span, and X-scale (Log-Linear) setup.

Amplitude

Set the parameters of amplitude, including Ref Level, Attenuator, Preamp, etc.; and

Correction setup.

Auto Tune

Scan the full span rapidly and move the biggest signal to center freq, and

automatically sets the optimal parameters according to the signal.

Setting Keys

Description

Set the parameters of RBW and VBW, Average Type (Log power, Power, Voltage).

Trace

Select Trace, Trace setup and Trace math.

Sweep

Set the parameters of sweep, and EMI QPD Dwell Time.

Detect

Select the detector type for each trace independently.

Trigger

Select triggers in Free Trigger, Video Trigger and External Trigger.

Limit

Set the Pass\Fail Limit.

Set the parameters of tracking generator. Including TG Level, TG Level offset

Normalization setup. The backlight LED is on when TG source is working.

Demod

Set the demodulation parameters of the AM and FM for audio listening.

Marker Keys

Description

Marker

Set the Markers and Marker Table.

Marker->

Set other system parameters on the basis of the current marker value.

Marker Fn

Special functions of the marker such as noise marker, N dB bandwidth measurement

and frequency counter.

Peak

Search for the peak signal, peak search configuration and peak table.

Meas Keys

Description

Meas

In spectrum analyzer mode, selects the Advanced Measurement function.

In non-spectrum analyzer mode, select corresponding settings.

Meas Setup

Set the measurement parameters.

System Keys

Description

System

Set the system parameters.

Mode

Select the working mode between spectrum analyzer and other modes.

Display

Set the display parameters.

File

Use the file system and files.

Shortcut Keys

Description

Preset

Sets the system to certain status.

Couple

Set the parameters of some functions between auto and manual.

Help

Turn on the built-in help.

Save

Save Shortcut Key.

Quick Guide 7

The on/off state and the color of the backlights of some keys at the front panel indicate the working

state of the analyzer. The states are as listed below.

1. Power Switch

Constant on: indicates the instrument is in normal operating state.

2. Mode

When the function is Spectrum Analyzer, the backlight turns off. When in another mode, the backlight

turns on.

3. TG

When the TG source is on, the backlight of TG turns on. When the TG is output is disabled the

backlight is off.

The analyzer provides a numeric keyboard at the front panel. The numeric keyboard supports English

uppercase/lowercase characters, numbers and common symbols (including decimal point, #, space

and +/-) and are mainly used to edit file or folder names and set parameters.

Figure 8 Numeric Keyboards

1. +/-

In the number input mode, this key sets the sign of number. In file input mode, this toggles the character

type between numbers and letters.

2. 1 A/a

In the number input mode, this key enters the number “1”. In file input mode, this toggles the between

upper and lowercase letters.

3. . #

In number input mode, this key enters a decimal point. In English input mode, this key enters special

characters (!, -, (, etc..).

8 Quick Guide

4. Back

In parameter editing, press this key to delete the character to the left of the cursor.

5. Esc

◆During the parameter editing process, press this key to clear the inputs in the active function area.

Press again to exit parameter input mode.

◆When the instrument is in remote mode (being controlled by a computer), use this key to return to

local mode. This will unlock the front panel.

6. Enter

In parameter editing, the system will complete the input and insert a default unit for the parameter.

1 2 3

Figure 9 Front Panel Connectors (1)

1. Power Switch

Power on / Power down the instrument

2. USB Host

◆The analyzer can serve as a “host” device to connect an external USB devices, such as USB

storage devices, the SIGLENT USB-GPIB adapter, wireless or wired mouse and keyboard.

◆Save or recall functional files into/from an external USB storage device, such as saving the

currently screenshot in .png or .jpg or .bmp format.

3. Earphone Jack

The analyzer can demodulate AM and FM signals.Insert a 3.5 mm earphone into to the jack to acquire

the audio output of the demodulated signal. You can turn on or off the earphone output and adjust the

volume via Demod ->Volume.

CAUTION

Protect your hearing. Please turn the volume down to zero before using the

earphone. Gradually turn the volume up to a comfortable level after putting

in the earphone.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSA3032X Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSA3000X Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSA5000 Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SNA5000A Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSA3000X Series Instrucciones de funcionamiento

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SNA5000A Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSA3075X Plus Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSA3000X Plus Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SPA-900 Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SAP1000 Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSA3000X Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario