Siemens RDS120-B Manual de usuario

Smart Thermostat

RDS120-B

Commissioning Guide

A6V11727391

06/20/19

Smart Infrastructure

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/19

Table of Contents

1 Summary ........................................................................................................ 3

1.1 Brief description ................................................................................................................ 3

1.2 Inbox items.......................................................................................................................... 3

1.3 Associated Equipment .................................................................................................... 3

2 Installation ..................................................................................................... 6

3 Setup wizard ................................................................................................ 10

4 Presence detection ..................................................................................... 11

4.1 Presence detection using the built-in PIR sensor ...............................................11

4.2 Approach detection .......................................................................................................12

5 Changing system setup.............................................................................. 14

6 Managing application settings ................................................................. 17

7 Disassembly ................................................................................................. 27

8 Appendices .................................................................................................. 28

8.1 Technical specifications................................................................................................28

8.2 Cyber security disclaimer .............................................................................................28

8.3 Regulatory information ................................................................................................28

8.3.1 ISED Regulations (Canada) ........................................................................28

8.3.2 FCC Regulations (USA)................................................................................29

8.4 EULA ....................................................................................................................................29

Summary

Brief description

3 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

1Summary

1.1 Brief description

Smart Thermostat RDS120 is designed to control the heating/cooling system in

apartments, single family homes, dormitories and other residential-type as well

as light commercial spaces. Apart from traditional operations performed directly

on the hardware unit, remote operations that use a mobile app are also allowed

for your convenience.

1.2 Inbox items

Items

Quantity

Thermostat (front and rear)

Metal mounting plates (small & large)

Plastic frame

Set of screws and drywall anchors

Quick guide

Mounting instructions

Wiring decals

Activation code decal

1.3 Associated Equipment

Remote sensors

Sensor Type

Model Number

1k Ohm

at 32°F

Ni R

Ohm Pt

RTD

Type 2

Thermistor

0-10 Vdc

Datasheet*

Room Temperature Sensors

- Wall-

mount

QAA2220.EWSN

149-714

QAA2212.EWSN

149-714

QAA2230.EWSN

149-714

QAA22SS.EWSN

149-714

- Flush-

mount1)

540-984

(Metal)

149-956

536-994A

(Beige)

149-956

536-994B

(White)

149-956

Summary

Associated Equipment

4 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

Sensor Type

Model Number

1k Ohm

at 32°F

Ni R

Ohm Pt

RTD

Type 2

Thermistor

0-10 Vdc

Datasheet*

- Duct-

mount

QAM2030.010

(4”)

149-915

Outdoor Temperature Sensors

QAC22

149-920

QAC2012

149-920

QAC2030

149-920

QAC3161

149-920

Cable Temperature Sensors

QAP22

149-918

QAP2012.150

149-918

QAP1030.200

149-918

Room Humidity Sensors

- Wall-

mount with

temperature

QFA3212.EWSN

x(T)

x (r.h.)

149-714

QFA32SS.EWSN

x (T+r.h.)

149-714

- Duct-

mount with

temperature

QFM2160U

x (T+r.h.)

149-991

Indoor Air Quality Sensors

- CO2

QPA2000

149-910

- VOC + CO2

QPA2002

149-910

QPA2002D1)

149-910

- CO2with

temperature

QPA2060

x(CO2+T)

149-910

QPA2060D1)

x(CO2+T)

149-910

- Duct-

mount CO2

QPM2100

149-909

- Duct-

mount VOC

+ CO2

QPM2102

149-909

- Duct-

mount CO2

with

temperature

QPM2160

x(CO2+T)

149-909

* The documents can be downloaded from Siemens US Download Center by specifying

the product number as shown in the above table.

1) With digital display

Summary

Associated Equipment

5 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

Replacement Part

Description

Model

Number

Orderable Part

Number

Plastic trim plate and metal

mounting plate for 2" ×4"

box (1 set)

ARG100.01

S55772-T102

Installation

6 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

2Installation

●The thermostat is designed for wall mounting.

●The recommended height is 5 feet above the floor.

●Do not mount the thermostat in recesses, shelves, behind curtains or doors,

or above or near heat sources.

●Avoid direct exposure to sun and drafts.

●Seal the conduit and/or wall opening, as drafts can affect sensor readings.

●Observe maximum ambient conditions.

1. Switch off power to the heating/cooling system at the breaker or system

power switch.

2. Remove the old thermostat from the wall with wires still connected.

3. Using the provided wire decals , label the existing wire connections. It is also

helpful to take a picture of the current wire connections for subsequent

reference.

Mounting

Installing the

thermostat

Installation

7 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

4. Disconnect all the labeled wires and then remove the old thermostat.

NOTICE! Do not discard the old thermostat in the trash if it contains

mercury. Contact a thermostat recycling organization, for example,

www.thermostat-recycle.org, for safe disposal of the old thermostat.

5. Check whether more wires are needed to bring 24 Vac power from the

HVAC equipment to the thermostat. If yes, prepare the wires and label them

accordingly.

6. Seal the conduit and/or wall opening to prevent entrance of cold or warm

air and ensure accurate temperature readings by the internal sensor.

7. Install the mounting plate and power unit.

–If you are mounting the thermostat directly on a wall, screw the small

mounting plate enclosed with the thermostat snugly on the wall using a

screwdriver, making sure that the mounting plate is placed correctly (the

part with the upward arrow is placed on the top), and then screw the

power unit on the mounting plate.

–If you are mounting the thermostat on a conduit box, install the metal

mounting plate enclosed with the thermostat tightly on the conduit box

(making sure that the upward arrow part is placed on the top), attach the

plastic trim plate to the mounting plate, and secure by screws.

Installation

8 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

Tip: Before installing the power unit, it is highly recommended the

labeled wires be connected to the terminals snugly according to the

thermostat terminal designations (you may also refer to the picture taken

in Step3). Do not overtighten.

NOTICE! a) The following illustration is for reference, which may be

different from the wiring for your application. b) The thermostat only

works with low-voltage wires (AC 24 V), so it is very important to

make sure that the thermostat is not connected to high-voltage

wires.

8. Attach the front module horizontally, making sure that each side of the front

module fully aligns with that of the power unit, and then press the corners

following the order described in the following illustration until you hear a

click sound. Note that you need to discharge the static electricity on your

body before mounting the front module. For example, touching the wall

could help on Electro-Static discharge (ESD).

9. Switch on power to the heating/cooling system. The thermostat should be

powered up as well.

See Mounting instructions for more information.

Wiring

Installation

9 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

●Observe local codes regarding wire type, overcurrent protection and ground.

●For HVAC systems with a single transformer, the RH-RC jumper must remain

in place. If separate transformers are used for heating and cooling systems,

remove the RH-RC jumper.

●24 Vac supply line must have a circuit breaker with a rated current of no

more than 4 A. The total current rating should not exceed 3.3 A. For 24 Vac

US installations, use Class 2 transformers.

●Disconnect from power supply before removing the front module and the

mounting plate.

Setup wizard

10 | 30

Siemens Industry, Inc.

A6V11727391

Smart Infrastructure

06/20/2019

3Setup wizard

When the thermostat is powered up for the first time, a setup wizard displays to

guide you through the following procedures:

●Setting a display language

●Setting an administrator password

●Setting up a network connection and choosing the network connection type

●Selecting an equipment type and setting up the details

●Configuring date

●Specifying a name to the location where the thermostat is installed

For more details, see the Quick guide.

Otros manuales para RDS120-B

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Termostato de Siemens

Siemens

Siemens RDG110 Manual de usuario

Siemens

Siemens RDF300 Series Manual de usuario

Siemens

Siemens RDG100KN Manual de usuario

Siemens

Siemens RDG400 Manual de usuario

Siemens

Siemens RDF880KN Series Manual del operador

Siemens

Siemens RDE20.1 Manual de usuario

Siemens

Siemens QAA2212.*W*N Manual de usuario

Siemens

Siemens Connected Home RDZ100ZB Manual de usuario

Siemens

Siemens RDJ10 Manual de usuario

Siemens

Siemens RDG100 Series Manual del operador

Siemens

Siemens Albatros2 RVS46 Series Manual de usuario

Siemens

Siemens RAZ-TW Manual de usuario

Siemens

Siemens RDJ100 Manual de usuario

Siemens

Siemens RDG165KN Manual de usuario

Siemens

Siemens QAW20 Manual de usuario

Siemens

Siemens RDE10.1DHW Manual de usuario

Siemens

Siemens RDF301 Manual de usuario

Siemens

Siemens RDS120 Manual de usuario

Siemens

Siemens RDE100 Series Manual de usuario

Siemens

Siemens RDH100RF/SET Manual de usuario

Siemens

Siemens EcoView 97-004 Manual de usuario

Siemens

Siemens RDG160TU Manual de usuario

Siemens

Siemens RDF510 Series Manual de usuario

Siemens

Siemens RDG400 Manual del operador

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario