Siemens RDD100.1DHW Manual de usuario

CB1B1421en_01 / 2013-03-07 Subject to alteration Siemens Building Technologies

Operating Instructions RDD100.1DHW

RDD100.1DHW is a room thermostat that allows you to set the ideal room temperature at the time you

want. In addition, it offers independent control of DHW (Domestic Hot Water).

1. Display

Indicating that batteries need to be replaced

Comfort mode

Economy mode

Frost protection

Display of room temperature, setpoint, etc.

Room temperature in degrees Fahrenheit

Room temperature in degrees Celsius

Button lock activated

Heating ON

DHW ON

Current room temperature

2. Change operating mode

3. Decrease value

4. Increase value

5. DHW ON/OFF

6. Battery holder

Do you want to change the operating mode?

The thermostat provides Comfort mode ,

Economy mode . Changeover between the

operating modes can be made manually by

pressing .

Comfort mode is the permanent (24 h) selection

of Comfort. Select this mode to maintain Comfort

temperature permanently. It is used during

occupancy periods, for example.

Economy mode is the permanent (24 h)

selection of Economy. Select this mode to

maintain the Economy temperature permanently.

It is used during non-occupancy periods, for

example at night.

Note:

Frost protection is a function always active in

the background. As soon the room temperature

falls below 5 ºC, the unit automatically activates

the heating .

Energy saving tips without sacrificing

comfort

•Use Economy mode for long periods of non-occupancy

Do you want to switch on DHW heating?

•Press to switch on DHW heating

•While DHW heating is switched on, the

symbol is displayed

•Press again; DHW heating is switched

off and the symbol disappears

DHW can also be switched on/off while frost

protection is active.

CB1B1421en_01 / 2013-03-07 Subject to alteration Siemens Building Technologies

Are your rooms too warm/too cold?

–

Press + or – to increase or decrease the room

temperature setpoint in increments of 0.5 °C /

1 °F. Proceed as follows:

•Press +or –to adjust the setpoint

temporarily.

Press or to save the value or wait

for the program to exit automatically.

•To permanently modify the temperature

setpoints, use parameters P05 and P07.

To lock the setpoints, use parameters P06

and P08.

Does symbol appear on the display?

(Only with battery-powered version)

Symbol is displayed when the batteries are low.

Replace them with 2 new alkaline batteries type AAA.

Proceed as follows:

•Get 2 new alkaline batteries type AAA

•Remove the battery holder, then the batteries, insert

the new batteries and, within 1.5 minutes, replace the

battery holder

•Ensure the exhausted batteries are disposed of

correctly, in compliance with environmental

requirements

Do you want to lock the buttons?

Press and hold for at least 7 seconds to

activate a button lock. Repeat to unlock.

The unit operates normally when the buttons are

locked, but no changes are possible while the

buttons are locked.

Do you want to change parameters?

–

If you want to change control parameters,

proceed as follows:

•Press +and – simultaneously for 5 seconds

•Release them and parameter "P02" is

displayed on the bottom segment

•Press +or – to scroll to the parameter that

needs to be adjusted

•Press to select this parameter

•Press +or – to adjust the value

•Press to confirm the adjusted value

•Select and modify other parameters

•Press to exit the parameters without

saving or wait for the program to exit

automatically

Parameter list

Parameter

no. Description Setting range (default)

P02 Selection of °C

or °F 1 = °C (default)

2 = °F

P03 Standard

temperature

display

1 = room temperature

(default)

2 = setpoint

P04 Temperature

sensor

calibration

-3…3 °C

Step 0.5 °C

(-6…6 °F, step 1 °F)

Default: 0 °C

P05 Comfort

setpoint 5…35 °C, step 0.5 °C

(41…95 °F, step 1 °F)

Default: 20 °C, 68 °F

P06 Comfort

setpoint lock 0 = OFF (default)

1 = ON –> locked according

to setting in P05

P07 Economy

setpoint 5…35 °C, step 0.5 °C

(41…95 °F, step 1 °F)

Default: 16 °C, 61 °F

P08 Economy

setpoint lock 0 = OFF (default)

1 = ON –> locked according

to setting in P07

P09 Buzzer 0 = OFF

1 = ON (default)

P10 Show frost

protection icon 0 = OFF (default)

1 = ON

P21 Button

scanning rate

for the

capacitive

buttons

Note: a shorter

scanning rate

means shorter

battery life.

0.2 = 0.25 s

0.5 = 0.5 s

1.0 = 1.0 s (default)

1.5 = 1.5 s

P22 Reload factory

settings 0 = OFF (default)

1 = reload

P23 Software

version

information

No adjustment possible

Otros manuales de Termostato de Siemens

Siemens

Siemens POS8.4420/414 Manual de usuario

Siemens

Siemens RDD100 Series Manual de usuario

Siemens

Siemens QAW20 Manual de usuario

Siemens

Siemens RDD100.1RFS Manual de usuario

Siemens

Siemens RDG Series Guía del usuario

Siemens

Siemens RDG100T/H Manual de usuario

Siemens

Siemens Powers TH 188 Manual del propietario

Siemens

Siemens RDF300.02/SRL Manual de usuario

Siemens

Siemens QAA73.110 Manual del operador

Siemens

Siemens Landis & Staefa RAV11 Series Manual de usuario

Siemens

Siemens RDJ10 Manual de usuario

Siemens

Siemens REA23.03RF Manual de usuario

Siemens

Siemens RDS110 Manual de usuario

Siemens

Siemens Powers ET 134 Series Manual del propietario

Siemens

Siemens RDF880KN/NF Manual de usuario

Siemens

Siemens EcoView Manual de usuario

Siemens

Siemens Free Energy Band TH 193 HC Manual de usuario

Siemens

Siemens RDH100RF/SET Manual de usuario

Siemens

Siemens RDG100 Series Manual de usuario

Siemens

Siemens RDF301 Manual de usuario

Siemens

Siemens RDG100T Manual de usuario

Siemens

Siemens RDS110.R Manual de usuario

Siemens

Siemens RDF800KN Manual de usuario

Siemens

Siemens TH 192 S Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario