Siemens GTW100ZB Manual de usuario

Connected Home Hub

GTW100ZB

To create Zigbee system and control connected Zigbee devices

●Mains-powered hub AC 230 V (with external power adapter SA68-050100V)

●Wireless communication based on Zigbee 3.0

●Support of Ethernet and WLAN connection

●Bridge between Internet and Zigbee networks

●Easy binding with mobile application "Connected Home" (downloadable from

Google Play™ or Apple App Store®)

●LED indication of power and network connection state

A6V12640776_en--_a

Siemens AG

2022-02-22

Smart Infrastructure

Siemens

A6V12640776_en--_a

Smart Infrastructure

2022-02-22

Use

●Part of Siemens Connected Home ecosystem

●Used with the mobile application to add and control RCR110.2ZB, SSA911.01ZB and

other devices in the system

●Typical application:

–Residential apartments

–Single family homes

Functions

●Different LED behaviors to indicate:

–Status of power connection, Ethernet connection, WLAN connection and Zigbee

connection

–Device restart

–Device reset via the mobile application

–Factory reset

●Remotely configurable using the mobile application

●Remotely controllable of devices on Zigbee network using the mobile application

●Restartable when the hub crashes or encounters unknown errors

●Factory resettable to erase all data including device configurations and device list

Technical design/mechanical design

No.

Description

Power LED

Ethernet LED

WLAN LED

Zigbee LED

Factory reset hole

●Restart button: Press and hold down the button for 10 seconds to restart the hub.

●Binding button: Press and hold down the button for six seconds to bind the hub with a created account

in the mobile application. The binding process adds the hub to the mobile application. It is initiated from

the mobile application end.

Siemens

A6V12640776_en--_a

Smart Infrastructure

2022-02-22

Type summary

Type

Stock number

Description

GTW100ZB

S55772-T109

Connected Home Hub

Ordering When ordering, indicate product number, stock number and description.

Inbox item

Items

Quantity

GTW100ZB

Power adapter

USB charge-only cable

Mounting instructions

Equipment combinations

Connected Home Receiver

Product number

Stock number

Description

RCR110.2ZB

S55772-T110

Connected Home Receiver

Wireless actuator

Product number

Stock number

Description

SSA911.01ZB

S55181-A101

Radiator Valve act. Zigbee

Accessories A power adapter and USB charge-only cable are supplied with each GTW100ZB.

Product documentation

Title

Document ID

Mounting instructions

A6V12694180

Quick start guide

A6V12694177

CE declaration

A5W00218222A

UKCA declaration

A5W00218223A

Product environmental declaration

A5W00217286A

Related documents such as environmental declarations, CE declarations, etc., can also be

downloaded at the following Internet address:

www.siemens.com/bt/download

Siemens

A6V12640776_en--_a

Smart Infrastructure

2022-02-22

Notes

Safety

CAUTION

National safety regulations

Failure to comply with national safety regulations may result in personal injury and property

damage.

●Observe national provisions and comply with the appropriate safety regulations.

For indoor use only

The hub is for indoor use only. Do not place it outdoors.

Mounting

●Place the hub near a power outlet.

●Place the hub at least 15 cm above the ground.

●There must be sufficient clearance around the power outlet to ensure that the power

adapter can be easily plugged in and removed.

●Put the Ethernet and power supply cables out of the way to avoid danger of tripping.

●Keep the hub out of the reach of people (including children) whose physical, sensory or

mental capabilities, knowledge or experience prevents them from using the hub safely

without supervision or instructions.

●Avoid placing the hub inside or near metal or sources of radio or electromagnetic energy

or interference, for example, do not place it under or on top of a WLAN router.

●Do not put the hub on metal surfaces.

●Do not put the hub near large metal structures or other construction elements with fine

metal meshes like special glass or special concrete.

●Do not put the hub in a location where it is exposed to dripping water, moisture or

excessive heat.

●The communication distance between controller/transmitter and receiver in a building is

typically 60 m without any blockades.

●The local regulations for electrical installations must be complied with.

●To maintain compliance with the RF exposure requirement, a separation distance of

20 cm between the device and the human should be maintained.

Installation Place the GTW100ZB at a suitable location and then plug in the power adapter.

Commissioning Prior to commissioning, ensure that the power adapter and Ethernet cable (if used) are

correctly connected.

Maintenance The device is designed for maintenance-free operation.

Open Source Software (OSS)

Software license overview

These devices use Open Source Software (OSS). All Open Source Software components

used in the product (including copyrights and licensing agreement) are available at

http://siemens.com/bt/download.

Siemens

A6V12640776_en--_a

Smart Infrastructure

2022-02-22

Firmware version

OSS document ID

Device

1.0.2

A6V13038924

GTW100ZB

Disposal

The device is considered an electronic device for disposal in accordance

with European Directive and may not be disposed of as domestic waste.

●Use only designated channels for disposing the devices.

●Comply with all local and currently applicable laws and regulations.

Warranty Technical data on specific applications are valid only together with Siemens products listed

under Equipment combinations [▶3].

When using the hub with third-party devices, users are responsible for ensuring

correct functioning. In that case, Siemens assumes no responsibility for any service

and warranty.

The power adapter and USB cable are exclusively designed for GTW100ZB.Siemens

rejects any and all warranties in the event they are used with other third-party

products.

Technical data - power adapter

Input characteristics

Rated input voltage

AC 100...240 V

Operation range

AC 90...264 V

Rated input frequency

47…63 Hz

Input current

Max. 0.2 A at AC 100 V input & max. load

Standby power consumption

≤ 0.1 W at AC 230 V input & no load

Output characteristics

Rated output voltage

5 V

Representative current

1 A

Output voltage range

DC 4.9...5.4 V

Turn on delay time

Max. 3 seconds at AC 100 V & max. load

Cable length

Length of prefabricated connecting cable

1.5 m

Siemens

A6V12640776_en--_a

Smart Infrastructure

2022-02-22

Technical data - GTW100ZB

Power supply

Operating voltage

DC 5 V

Power consumption

5 W

Interfaces

Ethernet

Plug: 1 x RJ45

Cable: CAT 5 or CAT 5e, non-shielding

Interface type: 100BASE-TX, IEEE 802.3 compatible

Bit rates: 10/100 Mbps, auto-sensing

Zigbee

Standard: Zigbee 3.0

Zigbee channels: 11-26

Frequency: 2.4...2.485 GHz

Maximum radio-frequency power: 12 dBm

Range: typically 60 m inside buildings

WLAN

Interface type: Wireless access point

Supported standards: IEEE 802.11 b/g

Frequency band: 2.4…2.485 GHz

WLAN channels: 1…13

Maximum radio-frequency power: 18 dBm

Distance (unobstructed field): Min. 5 m (16 ft)

General technical specification

Ambient conditions and protection classification

Safety class

Power adapter: Class II

Hub: Class III

Degree of protection of housing as per EN 60529

IP30 (excluding power adapter)

Classification

Function of automatic control devices

Operation altitude

Degree of pollution

Overvoltage category

< 3,000 m

II for the power adapter and I for the hub

Climatic ambient conditions

Transport (packaged for transport) as per EN 60721-3-2

Storage as per EN 60721-3-1

Operation as per EN 60721-3-3

Transport/Storage:

Temperature -25...70 °C (-13... 158 °F)

Air humidity 5...95 % r.h. (non-condensing)

Operation:

Temperature 0...50 °C (32... 122 °F)

Air humidity 5...95 % r.h. (non-condensing)

Mechanical ambient conditions

Transport as per EN 60721-3-2

Operation as per EN 60721-3-3

Class 2M2

Class 3M2

Siemens

A6V12640776_en--_a

Smart Infrastructure

2022-02-22

Standards, directives and approvals

EU conformity (CE)

A5W00218222A*)

UKCA

A5W00218223A*)

Environmental compatibility

The product environmental declaration

A5W00217286A*) contains data on environmentally

compatible product design and assessments (RoHS

compliance, materials composition, packaging,

environmental benefit, disposal).

* The documents can be downloaded from http://siemens.com/bt/download.

General

Hub with box, user document and accessory

285 g

Hub with accessory (power adapter and USB cable)

223.5 g

Housing color

Ivory white

Diagrams

Connection diagrams

Siemens

A6V12640776_en--_a

Smart Infrastructure

2022-02-22

Dimensions in mm

GTW100ZB

Power adapter

Regulatory compliance information

Radio equipment directive

The equipment uses harmonized frequency in Europe and complies with Radio Equipment

Directive 2014/53/EU (formerly 1999/5/EC).

Issued by

Siemens Switzerland Ltd

Smart Infrastructure

Global Headquarters

Theilerstrasse 1a

CH-6300 Zug

+41 58 724 2424

www.siemens.com/buildingtechnologies

Technical specifications and availability subject to change without notice.

Document ID

A6V12640776_en--_a

Edition

2022-02-22

Otros manuales para GTW100ZB

Tabla de contenidos

Otros manuales de Cambiar de Siemens

Siemens

Siemens SIRIUS 3SE5 Series Manual de usuario

Siemens

Siemens SCALANCE XR-300WG Manual de usuario

Siemens

Siemens SITRANS LVL200E Manual de usuario

Siemens

Siemens Pointek CLS200 Manual de instrucciones

Siemens

Siemens SCALANCE XR-100WG Series Manual de usuario

Siemens

Siemens 3KD Series Manual de usuario

Siemens

Siemens 3VL9400-2AQ00 Manual de usuario

Siemens

Siemens 3LD5.00 Series Manual de usuario

Siemens

Siemens RUGGEDCOM RSG2200 Manual de usuario

Siemens

Siemens FN2012-A1 Manual de usuario

Siemens

Siemens SIMATIC NET RUGGEDCOM RS950G Manual de usuario

Siemens

Siemens SIMATIC NET RUGGEDCOM M2200 Manual de usuario

Siemens

Siemens RUGGEDCOM RS8000 Manual de usuario

Siemens

Siemens 3RV1991-1AA0 Manual de usuario

Siemens

Siemens SITRANS LPS200 Manual de usuario

Siemens

Siemens SCALANCE X-100 Manual de usuario

Siemens

Siemens RUGGEDCOM RX1524 Manual de usuario

Siemens

Siemens RUGGEDCOM RST2228 Manual de usuario

Siemens

Siemens SIMATIC NET RUGGEDCOM PSG907R Manual de usuario

Siemens

Siemens SIRIUS 3RV1936-3A Manual de usuario

Siemens

Siemens RUGGEDCOM RS900GF Manual de usuario

Siemens

Siemens 3VL9800-3HA0 Manual de usuario

Siemens

Siemens 5SG7234-1 Manual de usuario

Siemens

Siemens SCALANCE MM900 Guía del administrador

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario