Siemens SISTORE AX9 Manual de usuario

Fire & Security Products

Siemens Building Technologies

CCTV

SISTORE AX9/AX16

Quick Reference Guide

Data and design subject to change without notice. / Supply subject to availability.

Siemens Building Technologies AG

We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights

and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our

prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.

This manual covers the 9-and16-channel digital video recorders. The DVRs are identical except for the number ofcameras and alarms that

can beconnected and the number of cameras that can be displayed. For simplicity, the illustrations and descriptions in this quick reference

refer to the 16-camera model.

Contents

Preface.............................................................................................................3

FCC statement of conformity ..............................................................................3

CE declaration of conformity...............................................................................3

1Installation........................................................................................3

2Operation..........................................................................................4

2.1 Turning on the Power .........................................................................4

2.2 Playback Commands ..........................................................................5

2.3 Front Panel Buttons and LEDs ............................................................6

2.4 System Setup.....................................................................................6

Preface

Siemens Building Technologies QSG_SISTORE_AX9_AX16_en.doc

Fire & Security Products 01.2004

Preface

FCC statement of conformity

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

CE declaration of conformity

The device supplied with this Instruction Manual meets the requirements of the

European Directive 89/336/EWG (electromagnetic compatibility). Compliance with

this EC directive has been proven by testing according to the standards

EN 50130-4 (EN 61000-2, -3, -4, -5, -6 and -11) for noise immunity and EN 55022

Class A for emitted interference.

1Installation

The SISTORE AX9/AX16 is designed to work a variety of other equipment. The

basic system will consist of a video camera and system monitor.

Refer to the User’s Manual CD (see directory:

SISTORE AX\\Documentation\\SISTORE AX9 AX16_EN.pdf)

for details of installing each type of equipment.

Fig. 1 SISTORE AX16 Rear Panel

Step 1:

Video In: Connect cameras (up to 9/16) to camera BNC inputs. If looping is

required, connect camera out to second source (second BNC).

Step 2:

Video Out and SVHS Out: Connect a monitor to a composite video output for multi-

screen display and playback. Connect a monitor to SVHS output if needed.

Step 3:

Power Connector: Apply power to the unit. Please note that the AX4 uses a

different power supply than that used with the AX9 and AX16 models!

Operation

Siemens Building Technologies QSG_SISTORE_AX9_AX16_en.doc

Fire & Security Products 01.2004

2Operation

2.1 Turning on the Power

The SISTORE AX9/AX16 is operational in approximately 60 seconds after the

power cable is connected to the system. The SISTORE AX9/AX16 may be

powered down by selecting the System Shutdown menu from the Quick Setup or

Normal Setup screen. When shutting down the DVR, you need to confirm that you

want to shut down the unit, and you will be asked for an administrator password.

No on/off switch is provided.

Fig. 2 SISTORE AX16 Front Panel

Display Modes

Press the desired camera number button to view the desired camera image, and

press the DISPLAY button repeatedly to toggle between different display formats:

full, 4 x 4, 3 x 3, 2 x 2 and PIP.

Recording

Once you have installed the system following the instructions described in the

User’s Manual, it is ready to record. There is no recording button on the front panel

to initiate recording video. The SISTORE AX9/16 will start recording video

according to the schedule configured by the user and from external and internal

events such as alarm input or motion detection events.

Operation

Siemens Building Technologies QSG_SISTORE_AX9_AX16_en.doc

Fire & Security Products 01.2004

2.2 Playback Commands

Camera Buttons (1 to 16)

Pressing a camera button will display that camera full screen.

Display Button

Pressing the Display button during playback will cycle the display through the

different screen layouts. The display modes are: full, 4 x 4and 3 x 3, and 2 x 2 (4x

4 format is not available for the SISTORE AX9). You cannot change the display

format while playing back video. Pause the video first, then change the format.

RW (Rewind) Button

Pressing the RW button plays video backward at high speed. Pressing the button

again toggles the playback speed from , and . The screen displays

, and respectively. Entering Fast Backward Playback mode from

Live Monitoring mode can be password protected.

PREV (Previous) Button

The PREV button only functions when playback video has been paused. Pressing

the PREV button plays video backward image-by-image.

Stop Button

Pressing the Stop button during Playback mode returns the DVR to the Live

Monitoring mode.

Next Button

The Next button only functions when playback video has been paused. Pressing

the Next button plays video forward image-by-image.

FF (Fast Forward) Button

Pressing the FF button plays video forward at high speed. Pressing the button

again toggles the playback speed from , and . The screen displays

, and respectively. Entering Fast Playback mode from Live

Monitoring mode can be password protected.

Operation

Siemens Building Technologies QSG_SISTORE_AX9_AX16_en.doc

Fire & Security Products 01.2004

2.3 Front Panel Buttons and LEDs

Camera

(1-9/16)Pressing the individual camera buttons will cause the selected camera to display full

screen. They are also used to enter passwords.

Sequence When in the live mode, pressing the Sequencebutton displays another full live channel

sequentially.

Display Pressing the Display button toggles between different display formats.

PTZ Pressing the PTZ button opens a Pan/Tilt/Zoom screen which allows you to control

properly configured cameras.

Freeze Pressing the Freeze button freezes the current live screen.

Alarm Pressing theAlarm button resetsthe DVR’s outputs including the internal buzzer during

an alarm, or displaysthe event log when you are in the live monitoring mode unless

there is an active alarm.

Search Pressing the Search button displays the Search menu.

Menu Pressing the Menu button enters the Quick Setup screen.

Enter Pressing the Enter button selects a highlighted item or completes an entry that you have

made.

Arrow These buttons are used to navigate through menus and Graphic User Interface (GUI).

Duplex The Duplex LED is lit when the DVR is operating in the Duplex mode.

Network The NetworkLED is lit when the unit is networked either via Ethernet or modem.

Backup The Backup LED is lit when data is being backed up using the USB port.

REC Press the REC button to set the DVR so that it is ready to record video

2.4 System Setup

The front panel buttons are used to enter system commands and for programming.

Press MENU button on the front panel and enter the password (default: 4321) by

pressing the appropriate combination of Camera number buttons and then the

Enter button. Refer to User’s Manual for the setup instructions in detail. The

documentation is located on the CD or in the application folder on the PC hard disk

(C:\SISTORE AX\…).

Quick Setup Menu Normal Setup Menu

Operation

Siemens Building Technologies QSG_SISTORE_AX9_AX16_en.doc

Fire & Security Products 01.2004

Issued by SGS

Fire & Security Products

D-76187 Karlsruhe

www.sbt.siemens.com/FSP

Siemens Building Technologies AG

Data and design subject to change without notice.

Supply subject to availability.

Printed in the Federal Republic of Germany

on environment-friendly chlorine-free paper.

Document no. A24205-A336-B604 CA70-0080

Edition 01.2004

Otros manuales para SISTORE AX9

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Siemens

Siemens

Siemens PBC Manual de usuario

Siemens

Siemens SYSCON1 Manual de usuario

Siemens

Siemens 19T2 Manual de usuario

Siemens

Siemens SIMATIC IPC477E 1900 PRO HD LR Ext. Manual de usuario

Siemens

Siemens MCM 17P1 Manual de usuario

Siemens

Siemens CMTC1913 Manual de usuario

Siemens

Siemens SIREMOBIL Manual de usuario

Siemens

Siemens CMTC1515 Manual de usuario

Siemens

Siemens SCD 1597-I Manual de usuario

Siemens

Siemens FSD901-U2 Manual de usuario

Siemens

Siemens SIMATIC Industrial Flat Panel IFP2200 Manual de usuario

Siemens

Siemens 125-2134 Manual de usuario

Siemens

Siemens UP587/1 Series Manual de servicio

Siemens

Siemens 19T2 Manual de usuario

Siemens

Siemens SIRIUS 3RK3 Manual de usuario

Siemens

Siemens SIMATIC HMI series Manual de usuario

Siemens

Siemens FT2011 Manual de usuario

Siemens

Siemens CMCC1020 Manual de usuario

Siemens

Siemens SCD 1297 Series Manual de usuario

Siemens

Siemens 175V Manual de usuario

Siemens

Siemens SSD Manual de usuario

Siemens

Siemens SITRANS RD100 Guía

Siemens

Siemens MCM-19T1 Manual de usuario

Siemens

Siemens DSP800 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación