Siemens MammoReport Plus Especificaciones técnicas

MammoReportPlus

English

Print No.: SPB7-420.831.20.01.02 Doc. Gen. Date: 01/05

The reproduction, transmission or

use of this document or its contents

is not permitted without express

written authority. Offenders will be

liable for damages. All rights,

including rights created by patent

grant or registration of a utility

model _or_design,_are_reserved.

The Maintenance Protocol

SPB7-420.832.20.01.02 is required for these

Instructions

System Manual

Maintenance Instructions

System maintenance

MammoReport Plus SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions

Rev. 01 01/05 CSPS 24 Erlangen, Germany

0 - 2 Revision

Document revision level

The document corresponds to the version/revision level effective at the time of system

delivery. Revisions to hardcopy documentation are not automatically distributed.

Please contact your local Siemens office to order current revision levels.

Disclaimer

The installation and service of equipment described herein is to be performed by qualified

personnel who are employed by Siemens or one of its affiliates or who are otherwise

authorized by Siemens or one of its affiliates to provide such services.

Assemblers and other persons who are not employed by or otherwise directly affiliated

with or authorized by Siemens or one of its affiliates are directed to contact one of the

local offices of Siemens or one of its affiliates before attempting installation or service pro-

cedures.

The DICOM functionalities in the MammoReportPlus system are based on the libraries

from Merge Technologies Inc.

FSC Celsius R610 and Fujitsu Siemens 38B2 are trademarks of their respective owners.

Windows XP Professional is a trademark of Microsoft Corporation.

SIMOMED SMM 21201P and syngo are trademarks of Siemens AG.

Softcopy reading software by MeVis BreastCare,

Chapter Page Revision

all all 01

Contents 0 - 1

Siemens Medical Solutions SPB7-420.831.20 Page 1 of 2 MammoReport Plus

Erlangen, Germany Rev. 01 01/05 CSPS 24

1 _______General information ____________________________________________ 1 - 1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Documents required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Time required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Text emphasis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Explanation of abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

2 _______Hardware maintenance __________________________________________ 2 - 1

Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

Keyboard and mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

3 _______Check of image quality __________________________________________ 3 - 1

4 _______Changes to previous version _____________________________________ 4 - 1

Page

0 - 2 Contents

MammoReport Plus SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions

Rev. 01 01/05 CSPS 24 Erlangen, Germany

Page

General information 1 - 1

Siemens Medical Solutions Register 8 SPB7-420.831.20 Page 1 of 2 MammoReport Plus

Erlangen, Germany Rev. 01 01/05 CSPS 24

1 General information

These instructions describe the maintenance of the MammoReportPlus system.

All maintenance should be carried out on a yearly basis.

All maintenance performed must be checked off in the MammoReportPlus Maintenance

Protocol (SPB7- 420.832.20...).

1.1 Safety Information

The product specific safety information contained in this document, as well as the general

safety information must be observed.

The general ESD guidelines must be observed. (Refer to document ARTD-001.709.01...)

1.2 Training

The training required is described in the document Field Service Strategy

(SPB7-420.890.10...).

1.3 Documents required

•Maintenance Protocol (SPB7- 420.832.20...)

•MammoReportPlus Quality Control Manual (SPB7-420.621.20 ...)

1.4 Time required

Approximately 2 - 2.5 hours for one CSE.

MammoReport Plus Register 8 SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions

Rev. 01 01/05 CSPS 24 Erlangen, Germany

1 - 2 General information

1.5 Text emphasis

1.6 Explanation of abbreviations

The work steps in this document that are identified by these abbreviations should be

checked off in the Maintenance Protocol (SPB7-420.832.20...).

DANGER indicates when there is an immediate danger that leads

to death or serious physical injury.

WARNING indicates a risk of danger that may lead to death or to

serious physical injury.

CAUTION used with the safety alert symbol indicates a risk of

danger that leads to slight or moderate physical injury and/or

damage to property.

NOTICE used without the safety alert symbol indicates a risk of

danger that if disregarded leads or may lead to a potential situa-

tion which may result in an undesirable result or state other than

death, physical injury or damage to property.

NOTE contains information provided with special emphasis to

facilitate proper use of the equipment or proper execution of a

procedure, i.e. hints, tips.

Abbreviation Explanation

SI Safety Inspection

SIE Safety Inspection Electrical Safety

SIM Safety Inspection Mechanical Safety

PM Preventive Maintenance

PMP Preventive Maintenance, Preventive Parts Exchange, External Inspec-

tion, etc.

PMA Preventive Maintenance Adjustments

PMF Preventive Maintenance Function, Operating Value Check

Q Quality Check

QIQ Quality Check Image

QSQ Quality Check System

SW Software Maintenance

DANGER

WARNING

CAUTION

NOTICE

NOTE

Hardware maintenance 2 - 1

Siemens Medical Solutions Register 8 SPB7-420.831.20 Page 1 of 2 MammoReport Plus

Erlangen, Germany Rev. 01 01/05 CSPS 24

2 Hardware maintenance

2.1 Computer

•Remove the computer access panel, refer to Fig. 1.

PM Check of fans

•Visually check that the two fans that are cooling the processors are working properly.

The air should flow from front to back.

•Visually check that the power supply fan works properly. The air should flow from front to

back.

•Listen to the noise of the fans. Does it sound ok?

•Shut down the operating system properly and turn off the computer and any external

devices.

•Disconnect the power supply cable.

High Voltage!

Life-threatening electric shock hazard exists.

Do not touch computer components until the power supply cable

has been disconnected.

The computer contains electrostatic highly sensitive components

requiring particular care in their handling.

Risk of damaging components.

Be sure to follow the ESD guidelines. When cleaning, make sure

that no cleaning liquid penetrates into the equipment.

Fig. 1 Remove the access panel.

WARNING

CAUTION

MammoReport Plus Register 8 SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions

Rev. 01 01/05 CSPS 24 Erlangen, Germany

2 - 2 Hardware maintenance

PM Fans - cleaning

•Clean dust from all fans.

PM Check internal cables and plugs

•Check that all internal cables are properly connected to the devices.

PM Cleaning

•If necessary, clean dust from the computer cabinet.

•Reinstall the computer access panel and connect the power supply cable.

2.2 Cables

PM Check that cables are not squeezed or broken

•Check that the cables are neither squeezed nor broken; if they are, they must be

replaced.

PM Check all external cable connections

•Check that all external cables are properly connected.

PM Safe cable run

•Check that all cables are placed in such a way that no one will trip over them.

2.3 Keyboard and mouse

PM Keyboard - cleaning

•Use a damp cloth to clean dust from the keyboard.

PM Mouse - operational check

•Check that the mouse is operational.

PM Mouse - cleaning

•Open the mouse and clean the rolls inside the housing.

•Clean the external surface of the mouse.

2.4 Monitors

PM Desktop placement

•Ensure that the two high resolution monitors are safely placed on the workstation table.

•Ensure that the service monitor is safely placed on a side table.

PM Cleaning

•Clean the housing of the two high resolution monitors and the service monitor with a

damp cloth.

•Wipe the glass with a cloth moistened with a lukewarm aqueous solution of mild

detergent.

Check of image quality 3 - 1

Siemens Medical Solutions Register 8 SPB7-420.831.20 Page 1 of 2 MammoReport Plus

Erlangen, Germany Rev. 01 01/05 CSPS 24

3 Check of image quality

QIQ Calibration of High resolution monitors

The two High resolution monitors must be calibrated every year.

•Perform calibration according to the MammoReportPlus System Manual Calibration of

Monitors (SPB7- 420.820.20...)

•Check calibration according to the MammoReportPlus Quality Control Manual (SPB7-

420.621.20 ...).

MammoReport Plus Register 8 SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions

Rev. 01 01/05 CSPS 24 Erlangen, Germany

3 - 2 Check of image quality

This page intentionally left blank.

Tabla de contenidos

Otros manuales de Equipo médico de Siemens

Siemens

Siemens Healthineers MAGNETOM Sempra Manual de usuario

Siemens

Siemens FUJI-Reader Manual de usuario

Siemens

Siemens MOBILETT XP Manual de usuario

Siemens

Siemens SOMATOM Sensation 16 Guía del usuario

Siemens

Siemens Uroskop ACCESS Manual de usuario

Siemens

Siemens ACUSON Freestyle Manual de usuario

Siemens

Siemens MAMMOMAT 1000 Nova Manual de usuario

Siemens

Siemens SOMATOM Emotion Manual de usuario

Siemens

Siemens MAGNETOM Avanto Manual de usuario

Siemens

Siemens MOMMOMAT 1000 Instrucciones y recetas

Siemens

Siemens SIREMOBIL Iso-C Instrucciones de uso

Siemens

Siemens MULTIMOBIL 10 Manual de usuario

Siemens

Siemens MAMMOMAT Novation SP Manual de usuario

Siemens

Siemens MAMMOMAT 1000 Instrucciones de funcionamiento y mantenimiento

Siemens

Siemens MAGNETOM Skyra fit Manual de usuario

Siemens

Siemens MOBILETT Plus HP Instrucciones de uso

Siemens

Siemens ACUSON Cypress Manual de usuario

Siemens

Siemens SIREMOBIL Iso-C 3D Manual de usuario

Siemens

Siemens ARCADIS Varic Guía

Siemens

Siemens POLYMOBIL III Manual de instalación

Siemens

Siemens SIREMOBIL Compact L Instrucciones de funcionamiento

Siemens

Siemens SOMATOM Emotion syngo CT 2007E Manual de usuario

Siemens

Siemens LITHOSTAR Multiline Especificaciones técnicas

Siemens

Siemens ACUSON S Series Manual de usuario

Manuales populares de Equipo médico de otras marcas

TekTone

TekTone Tek-CARE160 Manual de usuario

NeuroMetrix

NeuroMetrix Quell 2.0 Manual de usuario

AMT

AMT XLR8 Manual de usuario

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Manual de usuario

EDAN

EDAN SONOTRAX Pro Manual de usuario

Restorative Therapies

Restorative Therapies RT300 Manual de usuario

Gendex

Gendex Expert DC Manual de usuario

Dexcowin

Dexcowin ADX4000W Manual de usuario

Libelium

Libelium MySignals Manual de usuario

Acelity

Acelity V.A.C.ULTA 4 Manual de usuario

Caputron

Caputron ActivaDose II tDCS Manual de usuario

FujiFilm

FujiFilm Sonart Manual del propietario

Plinth 2000

Plinth 2000 93CDT Manual de usuario

GE SENOGRAPHE 800T Manual de usuario

GE Definium 5000 Manual de usuario

Kanmed

Kanmed GE-1380 Manual de usuario

Huntleigh

Huntleigh FD1 Manual de usuario

Stryker

Stryker SPR Plus Manual de usuario