Siemens CZM-4 Manual de usuario

Description

The Conventional Zone Module CZM-4 is used with the

MXL to provide four Class A (Style D) or Class B (Style

B) conventional initiating device circuits. Each circuit can

monitor up to 30 Siemens Fire Safety two wire photo-

electric or ionization smoke detectors and an unlimited

number of normally open contact devices. Projected

Beam Detectors may also be used. The CZM-4 circuits

will support the use of Detector Relay Bases, Audible

Bases and Remote Indicator Lamps. Activation of any

device on a circuit will initiate a zone alarm condition

resulting in the operation of programmed functions. Any

circuit in the alarm or trouble condition will be identified

by a user specified 32 character alphanumeric message

displayed on the MXL LCD annunciator.

5003

CATALOG NUMBER

• Four Conventional Initiating Device Circuits

• Supports the Use of:

30 Two Wire Photo or Ion Detectors Per Circuit

Projected Beam Detector (Limit 1 Per Circuit)

Unlimited Shorting Devices

Detector Relay Bases

Audible Bases

Remote Indicator Lamps

• Class A (Style D)

• Class B (Style B)

• On-Board Microprocessor

• 32 Character Custom Alphanumeric Message

Per Circuit

• Optional Alarm Verification by Circuit

• Walk Test by Circuit

• Circuits Power Limited per NEC 760

• Listed, ULC Listed, FM, CSFM, NYMEA

and City of Chicago Approved

CZM-4

Conventional Zone Module

Each of the CZM-4’s circuits are designed to function in a

local “Degrade” mode during failure of the MXL main

processor or the loss of the system communication

network. While in the “Degrade” mode the CZM-4 is still

capable of reporting both alarm and trouble conditions and

activating local outputs.

Any or all of the CZM-4 circuits can be programmed to

operate with the “AlarmVerification”feature. This feature

allows the automatic verification of alarm conditions caused

by smoke detectors in order to prevent nuisance alarms.

The CZM-4 module plugs into one full slot in the MOM-2

or MOM-4 expansion card cage. Up to two CZM-4 mod-

ules may be plugged into a MOM-4 card cage.

May 2002

Supersedes sheet dated 8/99

Siemens Building Technologies

Fire Safety

8 Fernwood Road

Florham Park, NJ 07932

Tel: (973) 593-2600

FAX: (973) 593-6670

Website: www.sbt.siemens.com/fis

5/02

SFS-IG

Printed in U.S.A.

Fire Safety

2 Kenview Boulevard

Brampton, Ontario

Canada L6T 5E4

Tel: (905) 799-9937

FAX: (905) 799-9858

Electrical Specifications

Electrical Connections

1. Initiating device circuits:

Voltage range 20-24.5VDC

Supervisory current 4mA max. capacitor EOL

9mA max. resistor EOL

Alarm current 180mA max. per zone

2. Initiating devices per zone:

Up to 30 detectors, any combination of those in No. 3

below. Up to five waterflow switches may be used.

Any number of direct shorting devices may be used.

Wiring may be Style D (Class A) or Style B (Class B).

3. The UL identifiers for compatibility are the same as the

model names specified below. Compatible

Siemens Fire Safety detectors are:

Detector Installation Instructions

DI-3/3H P/N 315-081943

DI-A3/A3H P/N 315-081943

DI-4A/4H P/N 315-085257

DI-6 P/N 315-085257

DI-B3/B3H P/N 315-086590

P/N 315-086591

P/N 315-086592

PE-11/PE-11T P/N 315-094198

DT-11 P/N 315-095429

PE-3000/3000T P/N 315-086441

PE-3/3T P/N 315-086545

PBA-1191 P/N 315-094912

4. All circuits are power limited to NFPA 70 per NEC 760.

Each detector or group of detectors must use a two

wire circuit of at least 18 AWG thermoplastic fixture

wire enclosed in conduit, or 18 AWG limited energy

shielded cable without conduit, if permitted by local

building codes.

5. Total circuit resistance must not exceed 70 ohms, 40

ohms if relay bases are used.

Ordering Information

Dimensions

Refer to Installation Instructions P/N 315-090726

Tabla de contenidos

Otros manuales de Alarma de incendios de Siemens

Siemens

Siemens FDOOT271-O Manual de usuario

Siemens

Siemens FDOOT241-9 Manual de usuario

Siemens

Siemens FP-11 FirePrint Manual de referencia

Siemens

Siemens HMS-SZ Manual de usuario

Siemens

Siemens FS720 Series Instrucciones de funcionamiento

Siemens

Siemens MH-5 Series Manual de servicio

Siemens

Siemens FDM223-Ex Manual de usuario

Siemens

Siemens FC700A Guía

Siemens

Siemens Cerberus Pyrotronics CP2297 Manual de usuario

Siemens

Siemens DM1132 Manual de usuario

Siemens

Siemens FC901 Guía del usuario

Siemens

Siemens FDM365-RP Manual de usuario

Siemens

Siemens FDMH294-R Manual de usuario

Siemens

Siemens AnalogPLUS DB1131A Manual de usuario

Siemens

Siemens HFPT-11 Manual de servicio

Siemens

Siemens DBS721 Manual de usuario

Siemens

Siemens FireSeeker FS-100 Manual de usuario

Siemens

Siemens FC700A Manual técnico

Siemens

Siemens FireSeeker FS-250 Manual de usuario

Siemens

Siemens CERBERUS AlgoRex Series Hoja de instrucciones

Siemens

Siemens Cerberus PRO FS720 Manual de usuario

Siemens

Siemens SSD-C Manual de usuario

Siemens

Siemens FT2040 Manual de instrucciones

Siemens

Siemens FDM275-O Manual de usuario

Manuales populares de Alarma de incendios de otras marcas

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 Manual de usuario

System Sensor

System Sensor 22051TLE-RF-26 Manual de usuario

Pittway

Pittway Notifier AM2020 Manual de usuario

Ampac

Ampac ZoneSense Manual de usuario

Kidde

Kidde VM-1 Manual del producto

LST

LST SIM016-3 Manual de usuario

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Instrucciones originales

bolid

bolid S2000-IP-03 Manual de usuario

GST

GST DI-9204 Manual de usuario

E2S

E2S BExTBG05D Manual de usuario

Notifier

Notifier UZC-256 Manual de usuario

Fire-Lite Alarms

Fire-Lite Alarms MS-2 Manual de usuario

hyfire

hyfire HY5000 Series Manual de usuario

FlameStop

FlameStop PFSIFP8 Manual de usuario

Radionics

Radionics Radionics 9124 Manual de usuario

UniPOS

UniPOS FD 7120 Manual de usuario

FIREWOLF

FIREWOLF FW-C01224 Manual de usuario

Ziton

Ziton ZP787-3 Instrucciones de montaje