Siemens Simatic S7-1500 Manual de usuario

Manual

Digital input module DI 16x230VAC BA (6ES7521-1FH00-0AA0)

07/2014Edition

Answers for industry.

SIMATIC

S7-1500

DI 16x230VAC BA Digital Input Module

(6ES7521-1FH00-0AA0)

___________________

SIMATIC

S7-1500/ET 200MP

DI 16x230VAC BA Digital Input

Module (6ES7521-1FH00-0AA0)

Manual

07/2014

A5E03485975

-AC

Preface

Documentation guide

Product overview

Wiring

Address space

Diagnostic alarms

Technical specifications

Dimensional drawing

Open Source Software

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E03485975-AC

Ⓟ

07/2014 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0)

Manual, 07/2014, A5E03485975-AC 3

Preface

Purpose of the documentation

This manual supplements the system manuals:

●S7-1500 Automation System

●ET 200MP Distributed I/O System

Functions that relate in general to the systems are described in these system manuals.

The information provided in this manual and in the system/function manuals supports you in

commissioning the systems.

Changes compared to previous version

Changes described in this manual, compared to the previous version:

●Module integrated in hardware catalog STEP 7 (TIA Portal) V13, Update 3 or higher with

the functions:

–Module-internal shared input (MSI) for Shared Device

–Configurable submodules, e.g., for Shared Device

●Appendix Open Source Software amended

Conventions

The term "CPU" is used in this manual both for the CPUs of the S7-1500 automation system,

as well as for interface modules of the ET 200MP distributed I/O system.

Please also observe notes marked as follows:

Note

A note contains important information regarding the product described in the documentation

or its handling, or draws special attention to a sect

ion of the documentation.

Preface

DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0)

4Manual, 07/2014, A5E03485975-AC

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, solutions, machines, equipment and/or networks. They are

important components in a holistic industrial security concept. With this in mind, Siemens’

products and solutions undergo continuous development. Siemens recommends strongly

that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic,

state-of-the-art industrial security concept. Third-party products that may be in use should

also be considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

To stay informed about product updates as they occur, sign up for a product-specific

newsletter. You can find more information on the Internet

(http://support.automation.siemens.com).

Open Source Software

Open-source software is used in the firmware of the product described. Open Source

Software is provided free of charge. We are liable for the product described, including the

open-source software contained in it, pursuant to the conditions applicable to the product.

Siemens accepts no liability for the use of the open source software over and above the

intended program sequence, or for any faults caused by modifications to the software.

For legal reasons, we are obliged to publish the original text of the license conditions and

DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0)

Manual, 07/2014, A5E03485975-AC 5

Table of contents

Preface ................................................................................................................................................... 3

1 Documentation guide .............................................................................................................................. 6

2 Product overview .................................................................................................................................... 8

2.1 Properties..................................................................................................................................8

3 Wiring ................................................................................................................................................... 10

4 Address space ...................................................................................................................................... 12

4.1 Address space ........................................................................................................................12

5 Diagnostic alarms ................................................................................................................................. 16

5.1 Status and error displays ........................................................................................................16

6 Technical specifications ........................................................................................................................ 18

A Dimensional drawing............................................................................................................................. 21

B Open Source Software.......................................................................................................................... 23

DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0)

6Manual, 07/2014, A5E03485975-AC

Documentation guide

The documentation for the SIMATIC S7-1500 automation system and the SIMATIC

ET 200MP distributed I/O system is arranged into three areas.

This arrangement enables you to access the specific content you require.

Basic information

System Manual and Getting Started describe in detail the configuration, installation, wiring

and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7 online

help supports you in the configuration and programming.

Device information

Manuals contain a compact description of the module-specific information, such as

properties, terminal diagrams, characteristics, technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

S7-1500 and ET 200MP systems, e.g. diagnostics, communication, Motion Control, Web

server.

You can download the documentation free of charge from the Internet

(http://www.automation.siemens.com/mcms/industrial-automation-systems-

simatic/en/manual-overview/tech-doc-controllers/Pages/Default.aspx).

Changes and supplements to the manuals are documented in a Product Information.

Documentation guide

DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0)

Manual, 07/2014, A5E03485975-AC 7

Manual Collection S7-1500 / ET 200MP

The Manual Collection contains the complete documentation on the SIMATIC S7-1500

automation system and the ET 200MP distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(http://support.automation.siemens.com/WW/view/en/86140384).

My Documentation Manager

The My Documentation Manager is used to combine entire manuals or only parts of these to

your own manual.

You can export the manual as PDF file or in a format that can be edited later.

You can find the My Documentation Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/38715968).

Applications & Tools

Applications & Tools supports you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus in individual products.

You can find Applications & Tools on the Internet

(http://support.automation.siemens.com/WW/view/en/20208582).

CAx Download Manager

The CAx Download Manager is used to access the current product data for your CAx or CAe

systems.

You configure your own download package with a few clicks.

In doing so you can select:

●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

●Manuals, characteristics, operating manuals, certificates

●Product master data

You can find the CAx Download Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/42455541).

DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0)

8Manual, 07/2014, A5E03485975-AC

Product overview

2.1

Properties

Article number

6ES7521-1FH00-0AA0

View of the module

Figure 2-1 View of the DI 16x230VAC BA module

Product overview

2.1 Properties

DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0)

Manual, 07/2014, A5E03485975-AC 9

Properties

The module has the following technical properties:

●16 digital inputs; electrically isolated in groups of 4

●Rated input voltage 120/230 V AC

●Suitable for switches and 2-/3-/4-wire AC proximity switches (alternating voltage)

The module supports the following functions:

Table 2- 1 Version dependencies of the module functions

Function

Firmware version

of the module

Configuration software

STEP 7

(TIA Portal)

GSD file in STEP 7

(TIA Portal) V12 or higher, or

STEP 7 V5.5 SP3 or higher

Firmware update

V1.0.0 or higher

V12 or higher

Identification data I&M0 to I&M3

V1.0.0 or higher

V12 or higher

Module-internal Shared Input (MSI) V2.0.0 or higher V13 Update 3 or

higher

(PROFINET IO only)

Configurable submodules / submodules for

Shared Device

V2.0.0 or higher V13 Update 3 or

higher

(PROFINET IO only)

Configurable after interface module

IM 155-5 DP ST

V2.0.0 or higher V13 or higher X

You can configure the module with STEP 7 (TIA Portal) and with a GSD file.

Accessories

The following accessories are supplied with the module and can also be ordered separately

as spare parts:

●Labeling strips

●U connector

●Universal front door

Other components

The following component must be ordered separately:

Front connectors, including potential jumpers and cable ties

You can find more information on accessories in the S7-1500 Automation System

(http://support.automation.siemens.com/WW/view/en/59191792) system manual and the

ET 200MP Distributed I/O System

(http://support.automation.siemens.com/WW/view/en/59193214) system manual.

Otros manuales para Simatic S7-1500

Tabla de contenidos

Otros manuales de Unidad de control de Siemens

Siemens

Siemens 3TK2811 Manual de usuario

Siemens

Siemens MJ-4 Series Manual de usuario

Siemens

Siemens WFZ661 Manual de instalación y operación

Siemens

Siemens SM 338 Manual de usuario

Siemens

Siemens SIMOTION D425 Manual de usuario

Siemens

Siemens SIMATIC FM 351 Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIRIUS 3TK2834 Manual de usuario

Siemens

Siemens SINUMERIK 808D Guía de inicio rápido

Siemens

Siemens SR-35 Manual de usuario

Siemens

Siemens OCM-16 Manual de usuario

Siemens

Siemens SINAMICS Series Documento técnico

Siemens

Siemens SINUMERIK 840D sl Manual de usuario

Siemens

Siemens RUGGEDCOM RS900 Manual de usuario

Siemens

Siemens SIMOCODE pro Manual de usuario

Siemens

Siemens SENTRON PAC RS485 Manual de usuario

Siemens

Siemens REMBOX2-MP Manual de usuario

Siemens

Siemens 2AI 2/4WIRE HF Manual de usuario

Siemens

Siemens XC1001-A Manual

Siemens

Siemens Synco 700 RMB795 Manual de usuario

Siemens

Siemens SINUMERIK 840D Hoja de instrucciones

Siemens

Siemens HOTEL SOLUTION HTC3.2 Series Manual de usuario

Siemens

Siemens CUA20 Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Documento técnico

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario