Siemens MOD-16 Manual de usuario

P/N 315-090830-8

Installation Instructions

Model MOD-16

Output Driver

INTRODUCTION

The Model MOD-16 MXL Output Driver from

Siemens Industry, Inc. is an annunciator driver

that activates up to 16 outputs.

The Model MOD-16 is controlled by the MOI-7

module (See P/N 315-092799). Up to eight

MOD-16s can be used with an MOI-7.

OPERATION

Each MOD-16 activates any of its 16 program-

mable outputs for LEDs or for 24V lamps. The

selection of either the desired LEDs or the 24V

lamps is made at 16 positions on dipswitches S1

and S2 (See Figure 1).

If LEDs are used, open all dipswitches in S1

and S2 to provide for current limiting. Opening

a dipswitch (OFF position) inserts a 2.7K ohm

resistor in series with the output.

If 24V lamps or the SR-35 are used, close all the

dipswitches. Closing a dipswitch (ON position)

eliminates the 2.7K ohm limiting resistor.

CAUTION: PROPER SETTING OF THE DIP-

SWITCH IS NECESSARY TO

PREVENT CIRCUIT DAMAGE.

For additional information on the MXL/MXLV

System, refer to the MXL/MXLV Manual,

P/N 315-092036.

INSTALLATION

Remove all system power before installation,

first battery and then AC. (To power up, first

connect the AC and then the battery.)

1. Mount the MOD-16 in one module space on a

System 3 type rail using the four screws

provided.

2. Connect the MOD-16 to the MOI-7 with the

10-position ribbon cable P/N 555-190940

provided with the MOI-7.

3. If a connection to a MOD-16 module on

another rail is required, use the optional

cable P/N 555-190941.

ELECTRICAL RATINGS

Terminal voltage: 40V peak maximum

Maximum current for each output: 50mA

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Building Technologies, Ltd.

Fire Safety & Security Products

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 Canada

tnerruCeludoMCDV5evitcAAm2

tnerruCeludoMCDV42evitcA Am05+Am0 detcennocrep tuptuo

tnerruCeludoMCDV42ybdnatSAm

NOTES:

1. 18 AWG minimum for LED and 24V

lamp connections.

2. 14 AWG minimum for supply connec-

tions (TB1-9 and 10, TB2-9 and 10).

3. All wiring must be in accordance with

NEC 760.

4. All wiring must conform to local codes

and to the authority having jurisdiction

over the installation.

5. All wiring to MOD-16 is unsupervised

and must not leave enclosure.

6. For additional information see MOI-7

Module instructions, P/N 315-092799.

7. A maximum of 8 MOD-16s can be

used with the MOI-7.

8. When using SR-35, refer to Table 1.

9. Both TB1-9 (or 10) and TB2-9 (or 10)

must be connected to the common of

the power supply.

P/N 315-090830-8

Figure 1

Wiring Connection

TABLE 1

Connection to SR-35 Module*

Note: When using SR-35 with MOD-16, jumpers

P1-P8 on SR-35 must be in position B.

MOD-16 SR-35 Screw Termina

TB1-1 4

TB1-2 8

TB1-8 32

To PSR-1, TB3-1, or to

PS-35, TB1-5 33

To PSR-1, TB3-2, or to

PS-35, TB1-6 35

*For additional information see:

SR-35 Instructions (P/N 315-087691)

PS-35 Instructions (P/N 315-085062)

PSR-1 Instructions (P/N 315-090911)

Otros manuales de Unidad de control de Siemens

Siemens

Siemens SIRIUS Star-Delta Combination S2 Manual de usuario

Siemens

Siemens SIMOCODE pro Manual de usuario

Siemens

Siemens 4AI I 4WIRE HART Manual

Siemens

Siemens FM 458-1 DP Manual de usuario

Siemens

Siemens VAI61 Series Manual de usuario

Siemens

Siemens SINAMICS G120P Instrucciones de montaje

Siemens

Siemens SINAMICS G130 Manual de usuario

Siemens

Siemens SIMATIC NET CP 343-1 Manual de usuario

Siemens

Siemens LMV 5 Series Manual del operador

Siemens

Siemens Simatic S7-1500 Manual de usuario

Siemens

Siemens SINUMERIK 840D sl Hoja de instrucciones

Siemens

Siemens SIRIUS Manual de usuario

Siemens

Siemens SINAMICS S120 Manual de lista de piezas

Siemens

Siemens SIRIUS 3RA2711 C Series Manual de usuario

Siemens

Siemens SINUMERIK 840DE Manual del propietario

Siemens

Siemens SIMATIC S7 Manual de usuario

Siemens

Siemens SINUMERIK 840D Manual de lista de piezas

Siemens

Siemens simovert masterdrives Manual de usuario

Siemens

Siemens 7KM4211-1BA00-3AA0 Manual de usuario

Siemens

Siemens LMV52 series Manual de usuario

Siemens

Siemens SINUMERIK 808D Manual de usuario

Siemens

Siemens SIMATIC FM 456-2 Instrucciones de montaje

Siemens

Siemens QAA73.210 Manual de usuario

Siemens

Siemens SINUMERIK 808D Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario