Siemens FN2013-U1 Manual de usuario

FN2013-U1, FN2014-U1

Fiber network module (SM/MM)

Installation

Mounting

A6V12093642_en--_b Smart Infrastructure

2023-01-23

Legal notice

Technical specifications and availability subject to change without notice.

Transmittal, reproduction, dissemination and/or editing of this document as well as

utilization of its contents and communication thereof to others without express

authorization are prohibited. Offenders will be held liable for payment of damages. All

rights created by patent grant or registration of a utility model or design patent are

reserved.

Issued by:

Siemens Industry, Inc.

Smart Infrastructure

2 Gatehall Drive

Parsippany, NJ 07054

Tel. +1 973-593-2600

www.usa.siemens.com/fire

Edition: 2023-01-23

Document ID: A6V12093642_en--_b

Legal notice

2 | 28 2023-01-23 A6V12093642_en--_b

A6V12093642_en--_b 2023-01-23 3 | 28

Table of contents

1 Fiber network module FN2013/FN2014 .................................................... 5

1.1 Description ..................................................................................................... 5

1.2 Installation in Desigo/CerberusPRO Modular................................................. 5

1.3 Views.............................................................................................................. 7

1.4 Wiring ............................................................................................................. 8

1.4.1 Wiring for Desigo/Cerberus PRO Modular....................................... 8

1.4.2 Power supply sockets (4, 6)............................................................. 15

1.4.3 Sockets for HNET, XNET, HUB-4, SNC (7, 8)................................. 16

1.5 Indicators........................................................................................................ 17

1.6 Technical data ................................................................................................ 18

1.7 Appendix ........................................................................................................ 19

1.7.1 Applications for FN2013 and FN2014 modules ............................... 19

1.7.2 Integrating FN2013/FN2014 into existing D23xx networks.............. 22

2 FCC Statement.............................................................................................. 26

4 | 28 2023-01-23 A6V12093642_en--_b

Index of figures

Fig. 1 Mounting of fiber network module with COM-BRK in housing CAB-1/-2/-3 ............................................ 6

Fig. 2 Views of the fiber network module from above and the side................................................................... 7

Fig. 3 Class B, HNET/XNET wiring on NIC-C ................................................................................................... 9

Fig. 4 Class X, HNET/XNET wiring on NIC-C (two FN2013/FN2014 required) ................................................ 10

Fig. 5 Class B, RS485/HUB-4 FSI wiring .......................................................................................................... 11

Fig. 6 Class X, RS485/HUB-4 FSI wiring (two FN2013/FN2014 required) ....................................................... 12

Fig. 7 Class B wiring to an SNC (Desigo CC/Cerberus DMS/NCC) ................................................................. 13

Fig. 8 Class X wiring to an SNC (Desigo CC/Cerberus DMS/NCC) (two FN2013/FN2014 required)............... 14

Fig. 9 Connector power A (B)............................................................................................................................ 16

Fig. 10 Connector EF1/EF2, FCnet/C-WEB A1/B1 (A2/B2)................................................................................ 17

Fig. 11 Fiber-optic cascading (daisy chain)......................................................................................................... 20

Fig. 12 Star-shaped fiber-optic network .............................................................................................................. 21

Fig. 13 Fiber-optic bridge .................................................................................................................................... 22

Fig. 14 Adding a new panel in cascade .............................................................................................................. 23

Fig. 15 New panel in existing star-shaped network ............................................................................................ 24

1 Fiber network module FN2013/FN2014

1.1 Description

The fiber network module multi-mode (MM) and the fiber network module single-mode

(SM) can be used for the exclusive purpose of networking fire detection panels to the

HNET, XNET, SNC, or HUB-4 over large distances using fiber-optic cable.

The fiber network modules have the following features:

● Fiber network module(SM) FN2013: Single-mode transmission up to

131,000ft/40,000m

● Fiber network module(MM) FN2014: Multi-mode transmission up to

13,100ft/4,000m

● SC connections for fiber-optic cable

● Trouble signaling via LED

● Mounting in panel

1.2 Installation in Desigo/CerberusPRO Modular

In Desigo/Cerberus PRO Modular systems, the fiber network module is installed on a

COM-BRK bracket that can be mounted to the CAB-1, CAB-2 or CAB-3 back box or to

the optional CAB-MP.

The COM-BRK takes up the same space as a CC-2 card cage. The fiber network

module should first be secured to the COM-BRK using the three screws provided with

the module, then installed in the back box or mounting plate using the four screws

provided with the bracket.

Once the bracket and module are secured to the cabinet, wire the module and connect

the optical fiber cable as described later in this document.

Fiber network module FN2013/FN2014

Description

A6V12093642_en--_b 2023-01-23 5 | 28

NOTICE

The fiber network module and bracket cannot be installed behind a FCM2041-U2,

FCM2041-U3, LVM or FMT.

NOTICE

Only use the fiber network module in dry rooms.

Fig. 1: Mounting of fiber network module with COM-BRK in housing CAB-1/-2/-3

1 Fiber network module

2 COM-BRK mounting plate

Fiber network module FN2013/FN2014

Installation in Desigo/CerberusPRO Modular

6 | 28 2023-01-23 A6V12093642_en--_b

1.3 Views

Fail1

RX1

LNK1

EF1

LNK2

PowerA

Fail2

RX2

PowerB

Line 1

Line 2

EF2

8 37

2 3

Fig. 2: Views of the fiber network module from above and the side

1 Fiber-optic SC connection for circuit 1

2 Fiber-optic SC connection for circuit 2

3 10 LED indicators for data transmission, errors and power supply for both

channels

4 Power B socket, do not use

5 Fastening tab for housing mounting

6 Power A socket, power supply

7 A2/B2 socket for HNET, XNET, HUB-4, SNC

8 A1/B1 socket for HNET, XNET, HUB-4, SNC

Fiber network module FN2013/FN2014

Views

A6V12093642_en--_b 2023-01-23 7 | 28

1.4 Wiring

1.4.1 Wiring for Desigo/Cerberus PRO Modular

● In Desigo/Cerberus PRO Modular systems, 'Power B' connections to the fiber

module and monitoring of its trouble contacts are not required, as the fiber modules

must be installed in the same enclosure as the power supplies that provide power

to them.

● Power A' inputs can only be supplied by UL864/ULC-S527 approved regulated

power sources.

– PSC-12 / PSC-12M (TB3) or PSX-12 / PSX-12M (TB3)

– UL/ULC LISTED REGULATED DC24V POWER SUPPLY (POWER LIMITED)

To ensure compatibility with the NIC-C, the HUB-4, or the SNC, connect the polarity

of the circuit exactly as shown.

The fiber network module FN2013/FN2014 does not feature ground fault supervision.

For connections via HNET/XNET, ground fault supervision is via the NIC-C.

Use only EF1 or EF2. EF1 and EF2 are interconnected internally. EF1 has an internal

120 Ω terminating resistor; EF2 does not have a terminating resistor. The right

selection of EF1 or EF2 depends on the application. You will find information about

selecting EF1 or EF2 in the following graphics in this section and in the graphics in

section 'Appendix [➙19]'.

Fiber network module FN2013/FN2014

Wiring

8 | 28 2023-01-23 A6V12093642_en--_b

Wiring class B HNET/XNET on NIC-C

1 2 3 4 5 6 7 8

ONE SLOT OF CC-5/CC-2

NIC-C

NC EF1

NC EF2

Power A Power B

Line 1

Line 2

SIEMENS

FN2013 / FN2014

NC NC NC NC NC NC NC

9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24

DC 24 V

[1]

[2]

Fig. 3: Class B, HNET/XNET wiring on NIC-C

Pin Designation Description

NIC-C/1 - NIC-C,RS48 circuit 1 -, monitored by NIC-C 1

NIC-C/2 + NIC-C, RS48 circuit 1 +, monitored by NIC-C 1

NIC-C/3-24 NC NIC-C, do not use

EF1/A1 + Fiber network module, RS485 circuit 1 +

EF1/B1 - Fiber network module, RS485 circuit 1 -

Power A/+ + Fiber network module, + DC24V 2

Power A/- - Fiber network module, GND 2

Power B NC Fiber network module, do not use

1 RS485 ratings:

- 8 V P-P, 150 mA max.,

- 2000 ft/610 m max

- 16 AWG max., 18 AWG min.,

- Positive or negative ground fault supervision at < 10 kΩ

2 Only connect to a UL864/ULC-S527 approved, power-limited, and regulated power

unit, e.g., PSC-12 / PSC-12M (TB3).

No EOL resistor required on NIC-C or fiber network module.

Fiber network module FN2013/FN2014

Wiring

A6V12093642_en--_b 2023-01-23 9 | 28

Wiring class X HNET/XNET on NIC-C

1 2 3 4 5 6 7 8

ONE SLOT OF CC-5/CC-2

NIC-C

NC EF1

NC EF2

Power A Power B

Line 1

Line 2

SIEMENS

FN2013 / FN2014

NC NC NC NC NC NC NC

9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24

NC EF1

NC EF2

Power A Power B

Line 1

Line 2

SIEMENS

FN2013 / FN2014

NC NC NC NC NC NC NC

DC 42 V

[1]

[2]

Fig. 4: Class X, HNET/XNET wiring on NIC-C (two FN2013/FN2014 required)

Pin Designation Description

NIC-C/1 - NIC-C, circuit 1A -, monitored by NIC-C 1

NIC-C/2 + NIC-C, circuit 1A +, monitored by NIC-C 1

NIC-C/3-4 NC NIC-C, do not use

NIC-C/5 - NIC-C, circuit 1B -, monitored by NIC-C 1

NIC-C/6 + NIC-C, circuit 1B +, monitored by NIC-C 1

EF1/A1 + Fiber network module, circuit 1A +/circuit 1B +

EF1/B1 - Fiber network module, circuit 1A -/circuit 1B -

Power A/+ + Fiber network module, + DC24V 2

Power A/- - Fiber network module, GND 2

Power B NC Fiber network module, do not use

1 RS485 ratings:

- 8 V P-P, 150 mA max.,

- 2000 ft/610 m max

- 16 AWG max., 18 AWG min.,

- Positive or negative ground fault supervision at < 10 kΩ

Fiber network module FN2013/FN2014

Wiring

10 | 28 2023-01-23 A6V12093642_en--_b

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Siemens

Siemens

Siemens Simatic S7-1500 Manual de usuario

Siemens

Siemens SINAMICS V20 Inverter Manual de usuario

Siemens

Siemens SITRANS PCS 7 Manual de lista de piezas

Siemens

Siemens SINAMICS S120 Documento técnico

Siemens

Siemens SIRIUS 3SB3 Manual de usuario

Siemens

Siemens SIROTEC Manual técnico

Siemens

Siemens 6SE7022-0ES87-2DC0 Manual de instrucciones

Siemens

Siemens M3P FY Series Manual de usuario

Siemens

Siemens SENTRON 7KM PAC 4DI/2DO Manual de usuario

Siemens

Siemens SINAMICS Startdrive Manual de usuario

Siemens

Siemens SIWAREX FTC Guía de aplicación

Siemens

Siemens SITRANS F M MAG 8000 Manual de usuario

Siemens

Siemens NCU 7x0.3 PN Series Manual de usuario

Siemens

Siemens XLD-1 Manual de usuario

Siemens

Siemens VN2001-A1 Manual de usuario

Siemens

Siemens SIRIUS Manual de usuario

Siemens

Siemens SIPROTEC4 7SJ61 Manual de usuario

Siemens

Siemens SITRANS RD500 Manual de usuario

Siemens

Siemens SAFEDLINK Guía

Siemens

Siemens 7153 Manual de usuario

Siemens

Siemens Simatic S7-1500/ET 200MP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens CM 1542-5 Manual de usuario

Siemens

Siemens SIMATIC ET 200S Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario