Shure PSM 900 Manual de programación

1/30

PSM900 -- Wireless Personal Monitor Sys-

tem

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accor-

dance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other appara-

tus (including amplifiers) that produce heat. Do not place any open flame sources on the product.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider

blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-

aged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vas-

es, on the apparatus.

16. The MAINS plug or an appliance coupler shall remain readily operable.

17. The airborne noise of the Apparatus does not exceed 70dB (A).

18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing

connection.

Shure Incorporated

2/30

19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

21. Operate this product within its specified operating temperature range.

WARNING

LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS

LOW A VOLUME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in

permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupation-

al Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing dam-

age occurs.

90dBSPL

at 8 hours

95dBSPL

at 4 hours

100dBSPL

at 2 hours

105dBSPL

at 1 hour

110dBSPL

at ½ hour

115dBSPL

at 15 minutes

120dBSPL

Avoid or damage may occur

HEARING PRECAUTIONS

To prevent possible hearing damage, do not listen at high volume levels for long peri-

ods.

SAFETY PRECAUTIONS

The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—de-

pending on the imminence of the danger and the severity of the damage.

WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect

operation.

CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result

of incorrect operation.

Shure Incorporated

3/30

WARNING

•If water or other foreign objects enter the inside of the device, fire or electric shock may result.

•Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

WARNING: Battery packs shall not be exposed to excessive heat such as sunshine, fire, or the like.

CAUTION

•Never disassemble or modify the device, as failures may result.

•Do not subject to extreme force and do not pull on the cable or failures may result.

•Keep the product dry and avoid exposure to extreme temperatures and humidity.

低功率電波輻射性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計

之特性及功能。第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時

方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學

及醫療用電波輻射性電機設備之干擾。

PSM 900

The Shure PSM 900 Wireless Personal Monitor System offers an unprecedented combination of superb audio

quality, robust RF performance, and category-leading features for the most demanding professional applications.

Patented Audio Reference Companding and advanced digital signal processing technology provide excellent

stereo separation and audio clarity. Exceptional transmitter linearity vastly reduces frequency intermodulation, al-

lowing more channels per frequency band. Patented CueMode technology enables the sound engineer to monitor

different stage mixes with the touch of a button.

Features

Unparalleled Audio Quality

•Bodypack receivers with advanced digital signal processing technology deliver more headroom, improved

stereo separation, and higher audio fidelity.

•Patented Audio Reference Companding offers natural and transparent sound.

• Available with Shure SE425 Sound Isolating™ earphones featuring dual high-definition MicroDrivers for accu-

rate and balanced audio response.

Robust RF Performance

•P9RA+ bodypack receivers offer enhanced signal reception and range.

•Precision front-end RF filtering significantly reduces RF interference for a cleaner, stronger RF signal, fewer

dropouts, and fewer audible artifacts.

Shure Incorporated

4/30

• Exceptional transmitter linearity vastly reduces frequency intermodulation and allows up to 20 compatible chan-

nels per frequency range.

•Automatic RF gain control prevents signal distortion due to RF overload before it can affect performance.

Category-Leading Setup and Operation Features

• CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels on one body-

pack for quick and easy reference.

•Front panel RF mute switch enables or disables RF transmission during setup.

•Scan and Sync scans the RF environment with the bodypack and assigns an identified group and channel to

your system over wireless IR link.

•MixMode technology allows the bodypack user to combine two separate audio channels for simultaneous lis-

tening in both ears, or can transmit two independent IFB program feeds. Balance control on the bodypack ad-

justs the relative levels for each audio signal.

•Four-band parametric EQ gives the user the choice to adjust frequencies for a fully customized sound.

Advanced Rechargeability Options

•The SB900A lithium-ion rechargeable battery provides extended usage times and precise tracking of remaining

life and charge cycle details.

•The SCB800-US eight-bay charger brings up to eight SB900 batteries to full charge within two hours and has

charge status LEDs for each battery.

•The SBC200 dual-docking charger works with SB900A, P3RA, P9RA+, P10R+, QLX-D Digital Wireless Sys-

tems, and ULX-D Digital Wireless Systems, available with and without power supply.

•The SBC220 networked dual-docking charger works with SB900A, PSM 300 (P3RA only), PSM 900 (P9RA+

only), PSM 1000 (P10R+ only), QLX-D Digital Wireless Systems, ULX-D Digital Wireless Systems, and Axient

Digital (AD1 and AD2 only), available with and without power supply. When the SBC220 is connected to a net-

work, battery information for each transmitter can be viewed remotely.

Components

•P9T: Rack Unit Transmitter

•P9RA+: Bodypack Receiver

•PS43: Power supply

•Protective bumpers with 8 screws

Rackmount supplies

①Short rack ear

②Long rack ear

③Link bar to mount to similar rack unit

④2 antenna hole plugs

⑤8 rack ear screws

⑥4 rack mount screws with washers

⑦Extension cables and connectors for front-mounting antennas

Shure Incorporated

5/30

Quickstart Instructions

Rack Mount Transmitter

1. Connect to a power outlet using the supplied power adapter.

2. Attach the supplied antennas to the antenna out BNC connectors.

3. Connect the audio source, such as the output of a mixer, to the audio inputs. You can use both input jacks or

choose either one for a mono source.

◦For mono (one input), access the Audio menu and select Mono.

◦Set the input sensitivity to match the source by selecting Audio INPUT from the LCD configuration menu:

Aux (-10dBV) or Line (+4dBu).

4. Make sure the RF switch is OFF. Turn the power ON.

5. Adjust the audio source level so that, for the average input signal level, the top two yellow LEDs flicker and the

lower LEDs are solid.

◦ If the red clip LED illuminates, the inputs are overdriven. Decrease the level using the ▼▲ buttons or

change the input sensitivity to +4 dBu.

◦If the signal level is too low, change the input sensitivity to –10 dBV

Shure Incorporated

6/30

Shure Incorporated

7/30

Bodypack

Insert batteries and attach antenna. Turn on using the volume knob. The battery light illuminates.

Scan and Sync

1. On the bodypack, press the scan button. The display flashes SYNC NOW....

2. Align the IR windows on the bodypack and rack unit and press the sync button. The rack unit Level LEDs flash,

and it displays SYNC SUCCESS.

3. Turn the RF switch on. The blue RF LED illuminates on the bodypack to indicate that it is detecting the trans-

mitter. The bodypack also displays the RF signal strength (RF).

4. Important: Turn bodypack volume down before plugging in earphones.

5. Insert the earphones and slowly turn up the volume.

Shure Incorporated

8/30

Shure Incorporated

9/30

Rack Unit Transmitter

Front Panel Controls

①Input Level Control and Display

Use the ▼▲ buttons to adjust the audio so that, for the average input signal level, the top two yellow LEDs flicker

and the lower LEDs are solid. The red clip LED indicates the inputs are overdriven. Reduce the level at the audio

source or change the input sensitivity of the rack unit from the AUDIO > INPUT menu.

②Status Display and Menu Controls

Use the enter and exit buttons and the menu wheel to access the configuration menu. Push the menu wheel to

move the cursor to the next item. Turn the menu wheel to change a parameter—the enter button flashes. Press it

to save the value. Press the exit button to cancel changes and return to the previous menu.

③Synchronization Button

Press the sync button while rack unit and bodypack IR windows are aligned to transfer settings.

④Headphone Monitoring

Shure Incorporated

10/30

The volume control adjusts signal output to the 3.5 mm headphone jack. NOTE: it does not affect rear panel out-

puts.

⑤RF switch

Mutes RF output. For setting up multiple systems or adjusting settings without transmitting unwanted RF or audio

signals.

⑥Power Button

Turns the unit on and off.

Rear Panel Connectors

⑦Power

Connect the transmitter to a power outlet using the supplied power adapter.

⑧LOOP OUT

Sends a copy of the audio signal going into the transmitter to another device. See LOOP Applications.

⑨Audio Inputs

Connect to balanced or unbalanced outputs. Use either connector for mono input. Accepts both 1/4-inch or male

XLR connectors.

⑩Antenna (BNC)

Attach supplied antenna. If you are rack mounting, use a front panel or remote mounting kit from Shure.

Configuration Menu

Note: Configuration menu items may vary with regional model variations.

RF Settings

RADIO

Sets the group number

Sets the channel number

Otros manuales para PSM 900

Tabla de contenidos

Otros manuales de Equipo de grabación de Shure

Shure

Shure M78S Manual de usuario

Shure

Shure PSM 900 Manual de usuario

Shure

Shure ML140HE Manual de usuario

Shure

Shure MV88+ Manual de usuario

Shure

Shure PSM 200 Guía de inicio rápido

Shure

Shure DFR11EQ Version 5 Manual de usuario

Shure

Shure Microphone Level Tone Generator A15TG Manual de usuario

Shure

Shure MVI Manual de usuario

Shure

Shure PSM1000 Manual de usuario

Shure

Shure 44 Series Manual de usuario

Shure

Shure ANI4IN Series Manual de usuario

Shure

Shure ANIUSB-Matrix Manual de usuario

Shure

Shure PSM 900 Manual de usuario

Shure

Shure ANI4IN Series Manual de usuario

Shure

Shure P3RA Manual de usuario

Shure

Shure AMS880 Manual de usuario

Shure

Shure PSM 300 Manual de usuario

Shure

Shure A820-NIC-DANTE Manual de usuario

Shure

Shure DFR11EQ Version 5 Manual de usuario

Shure

Shure 35 Series Manual de usuario

Shure

Shure M625 Manual de usuario

Shure

Shure PSM 600 Manual de usuario

Shure

Shure M75ECS Manual de usuario

Shure

Shure PS9 Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado