Show Tec Creator 1024 Manual de usuario

Creator 1024

Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands

Ordercode: 50730

MANUAL

ENGLISH

Creator 1024

Ordercode: 50730

Table of contents

1. Overview.........................................................................................................................................................................3

1.1 Specifications ..........................................................................................................................................................3

2. Installation.......................................................................................................................................................................4

2.1 Unpack .....................................................................................................................................................................4

2.2 Safety instructions ...................................................................................................................................................4

3 Operation ........................................................................................................................................................................8

3.1 Front Panel ...............................................................................................................................................................8

3.2 Fixture area ..............................................................................................................................................................9

3.3 Playback area.........................................................................................................................................................9

3.4 Attribute area........................................................................................................................................................10

3.5 Playback control area.........................................................................................................................................10

3.6 Function area ........................................................................................................................................................10

3.7 Fixture control area ..............................................................................................................................................10

3.8 LCD area ................................................................................................................................................................11

3.9 Wheel area ............................................................................................................................................................11

3.10 Glossaries..............................................................................................................................................................11

4 Patch ..............................................................................................................................................................................12

4.1 Create.....................................................................................................................................................................12

4.1.1 Patch dimmer.................................................................................................................................................12

4.1.2 Patch moving light fixtures ...........................................................................................................................12

4.1.3 View the patching.........................................................................................................................................12

4.2 Edit...........................................................................................................................................................................12

4.2.1 Changing the DMX address ........................................................................................................................12

4.2.2 Deleting a patched fixture ..........................................................................................................................12

4.2.3 Patch Utilities...................................................................................................................................................13

5 Controlling fixtures........................................................................................................................................................14

5.1 Select fixtures.........................................................................................................................................................14

5.2 Modify an attribute value ...................................................................................................................................14

5.3 Advanced options ...............................................................................................................................................14

5.4 Fan mode...............................................................................................................................................................15

5.5 Clear the Programmer.........................................................................................................................................15

6 Palette ............................................................................................................................................................................16

6.1 Shared and individual Palette ...........................................................................................................................16

6.2 Which attributes are stored in palettes ............................................................................................................16

6.3 Storing a palette ...................................................................................................................................................16

6.4 Recalling a palette value ...................................................................................................................................16

6.5 Delete a Palette....................................................................................................................................................17

7 Shapes ............................................................................................................................................................................17

7.1 Select a shape ......................................................................................................................................................17

7.2 Edit a shape...........................................................................................................................................................17

7.3 Delete a shape .....................................................................................................................................................17

8 Scene..............................................................................................................................................................................18

8.1 Create.....................................................................................................................................................................18

8.2 Include....................................................................................................................................................................18

8.3 Copy .......................................................................................................................................................................18

8.4 Delete .....................................................................................................................................................................18

8.5 Time .........................................................................................................................................................................19

8.6 Run scenes .............................................................................................................................................................19

9 Chase .............................................................................................................................................................................20

9.1 Create.....................................................................................................................................................................20

9.2 Delete a step.........................................................................................................................................................20

9.3 Step time ................................................................................................................................................................20

9.4 Include steps .........................................................................................................................................................20

9.5 Global Time............................................................................................................................................................20

Creator 1024

Ordercode: 50730

9.6 Delete a scene .....................................................................................................................................................20

9.7 Copy a scene........................................................................................................................................................21

9.8 Run chase ..............................................................................................................................................................21

9.9 Connect .................................................................................................................................................................21

10 Setup.............................................................................................................................................................................21

10.1 Manage USB memory........................................................................................................................................21

10.2 Wipe data............................................................................................................................................................21

10.3 Select Language ................................................................................................................................................21

10.4 Manager library ..................................................................................................................................................21

11 Personality Builder ......................................................................................................................................................22

11.1 Interface of Personality Builder ........................................................................................................................22

11.2 How to create a new Personality (Library) ....................................................................................................22

12 Maintenance ..............................................................................................................................................................25

13 Troubleshooting ..........................................................................................................................................................25

13.1 No Light ................................................................................................................................................................25

13.2 No Response to DMX .........................................................................................................................................25

Creator 1024

Ordercode: 50730

1. Overview

Showtec Creator 1024 DMX controller can control up to 96 fixtures. It is compatible with the library in

Avolite Pearl R20 format and featured with built-in shape effects of pan/tilt circle, RGB rainbow, beam

dimming wave, etc. 10 scenes and 5 built-in shapes can be output simultaneously. Sliders can be used to

output scenes and adjust the intensity of the dimmer channels in the scenes.

1.1 Specifications

DMX channel

1024

Fixture

Channels for each fixture

40 primary + 40 fine tune

Library

Avolite Pearl R20 library supported

Re-patched Fixture address

Yes

Swop Pan/Tilt

Yes

Reversed channel output

Yes

Channel slope modification

Yes

Scene

Scenes to run simultaneously

Scene step

600

Time control of scenes

Fade in/out, LTP slope

Shapes for each scene

Scene and dimmer by slider

Yes

Interlocked scene

Yes

Button controlled scene

Yes

Shape generator

Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color,

Gobo, Iris and Focus

Shapes to run simultaneously

Master slider

Global, playback, fixture

Real time blackout

Yes

Channel value by wheel

Yes

Channel value by slider

Yes

Dimmer by slider

Yes

USB Memory

FAT32 supported

Creator 1024

Ordercode: 50730

2. Installation

2.1 Unpack

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

Creator 1024

Power cable

User manual

Optional Accessories

Goose-neck lamp (ordercode: 60722)

2.2 Safety instructions

Every person involved with the installation, operation and maintenance of this device has to:

be qualified

follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Creator 1024

Ordercode: 50730

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Do not open the device and do not modify the device.

Never use anything to cover the ground contact.

Never leave any cables lying around.

Do not insert objects into air vents.

Do not connect this device to a dimmerpack.

Do not switch the device on and off in short intervals, as this would reduce the device’s life.

Do not shake the device. Avoid brute force when installing or operating the device. Never use the

device during thunderstorms, unplug the device immediately.

Only use device indoor, avoid contact with water or other liquids.

Do not touch the device’s housing bare-handed during its operation (housing becomes hot).

Only operate the device after having familiarized with its functions.

Avoid flames and do not put close to flammable liquids or gases.

Always keep case closed while operating.

Always allow free air space of at least 50 cm around the unit for ventilation.

Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

If the external cable is damaged, it has to be replaced by a qualified technician.

If the glass is obviously damaged, it has to be replaced. So that its functions are not impaired, due to

cracks or deep scratches.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the

device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. Lighteffect must be installed out of the reach of children. Never leave the unit

running unattended.

For replacement use fuses of same type and rating only.

Allow time to cool down, before replacing lamp.

The user is responsible for correct positioning and operating of the Creator 1024. The manufacturer

will not accept liability for damages caused by the misuse or incorrect installation of this device.

This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

During the initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

Creator 1024

Ordercode: 50730

Operating Determinations

This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

The maximum ambient temperature ta = 45°C must never be exceeded.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

If this device is operated in any other way, than the one described in this manual, the product may

suffer damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

FASE

BLUE

BLACK

SILVER

NUL

YELLOW/GREEN

GREEN

EARTH

Make sure that the device is always connected properly to the earth!

Improper installation can cause serious damage to people and property!

Creator 1024

Ordercode: 50730

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

1) Your name

2) Your address

3) Your phone number

4) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

Creator 1024

Ordercode: 50730

3 Operation

3.1 Front Panel

Creator 1024

Ordercode: 50730

The front panel consists of several areas:

3.2 Fixture area

including 16 <Fixture> buttons, 16 sliders and 6 <Page> buttons.

There are 6 pages of fixtures supporting up to 96 fixtures. The <Attribute/Dimmer> button with 2 LED

indicators can be used to switch the functions of the 16 sliders. When <Attribute> is activated, the sliders

are used to adjust the value of attribute which above the sliders; When <Dimmer> is activated, the sliders

are to adjust the intensity of fixtures.

3.3 Playback area

Including 10 <Swop> buttons, 10 <Flash> buttons, 10 playback sliders, 3 <Page> buttons and 1 <Blackout>

button

Tabla de contenidos

Otros manuales de Mezclador de música de Show Tec

Show Tec

Show Tec LED Operator 4 Air V2 Manual de usuario

Show Tec

Show Tec Galactic 1K20 TXT Manual de usuario

Show Tec

Show Tec ColorCue 2 Manual de usuario

Show Tec

Show Tec Stage Master Pro Instrucciones de instalación

Show Tec

Show Tec sds-6 Manual de usuario

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Behringer

Behringer EUROPOWER PMP518M Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Roland

Roland M-160 Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

Roland

Roland SoundCanvas SC-8820 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario