Show Tec Arc-Bar 3 Manual de usuario

Arc-Bar 3

ORDERCODE 41350

Congratulations!

You have bought a great, innovative product from Showtec.

The Showtec Arc-Bar 3 brings excitement to any venue. Whether you want simple plug-&-play action or a

sophisticated DMX show, this product provides the effect you need.

You can rely on Showtec, for more excellent lighting products.

We design and manufacture professional light equipment for the entertainment industry.

New products are being launched regularly. We work hard to keep you, our customer, satisfied.

For more information: iwant@showtec.info

You can get some of the best quality, best priced products on the market from Showtec.

So next time, turn to Showtec for more great lighting equipment.

Always get the best -- with Showtec !

Thank you!

Showtec

Showtec Arc-Bar 3™Product Guide

Warning..…...................................................................................…………………………………….………….…….

Unpacking Instructions………………………………………………………………………………………………….

Safety-instructions………………………………………………………………………………………………………..

Operating Determinations…………………………………………………………………………………………….

Rigging………………………………………………………………………………………………………………….…

Interlocking Multiple Fixtures………………………………………………………………………….………………

Description..…..............................................................................……….…………………………………………….

Features…….……………………………………………………………………………………….……...……………..

DMX Channel Summary………………………………………………………………………………………………..

Overview…………………………………………………………………………………………………………………..

Backside…………………………………………………………………………………………………………………...

Installation...............................................................................…...…………………………………….…………….…

Set Up and Operation.....................................................................……..…………………………….………………

Fixture Linking…………………............……..……………………………………………..……………………………

Data Cabling…………………............……..……………………………………………..……………………………

DMX Addressing without ID addressing.……………………............……..……………………………………….

DMX Addressing with ID Address……….........………………………………………....……………………………

ADAS with ID address...........……..…………....……..………………......……..…………………………………….

Control Panel...........……..…………....……..………………......……..……………………………………………...

MENU OVERVIEW ……..……………………………………..…………………………………….…….…………...…

- Creating a static color …...............................................…......……………………....…………..………..

- DMX 512 Address......................................................................….....……………..………………………..

- Activating an Auto Program …...............................................………………….....………………………

- Changing the Settings...............................................................….....……………..……………...……….

- Activating the Password …...............................................…......……………………....…………………..

- Power ON/OFF.................................…......……………………....…………………………………………….

Menu Map.....................................……..…………………………….......……..…………………………………..…..…

DMX Protocol.....................................……..…………………………….......……..…………………………………..…

Basic Instructions for DMX512 Operation DMX Mode 1...................................……..…………………………

DMX Control Mode 1..............……..….………………......………………....………………………………….……

Basic Instructions for DMX512 Operation DMX Mode 2...................................……..…………………………

DMX Control Mode 2..............……..….………………………………………………………………………………

DMX Value –ID Addresses......................................……..…………………………….………………………………

Examples.………………...................................................................……..…………………………….………………

Example 1..............……..………………………………………………………………………………………………..

Example 2..............……..………………………………………………………………………………………………..

Beam Angles…………...................................................................……..…………………………….………………..

Connection Cables.….................................................................……..…………………………….………………..

Maintenance...................................................................................………..………….…….………………………..

Troubleshooting............................................................................………………….………………….………………

Product Specifications.................................................................……………….…….………………………………

WARNING

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

• Arc-Bar 3

• 1X Powercable

• 1X XLR to 3-pin special connection cable

• User manual

General Information Highlite International B.V..

Vestastraat 2

6468 EX Kerkrade

The Netherlands

Sales Department: 0031 45-5667701

Export Department: 0031 45-5667706

Technical Support Highlite International B.V..

Vestastraat 2

6468 EX Kerkrade

The Netherlands

Technical Department: 0031 45-5667703

Internet www.highlite.nl/

LED Expected Lifespan

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration

of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular

optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is

significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000 hours will be achieved

under normal operational conditions. If improving on this lifespan expectancy is of a higher priority, place

care in providing for lower operational temperatures. This may include climatic-environmental and the

reduction of overall projection intensity.

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-

observance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Never use anything to cover the ground contact.

Never look directly into the light source.

Never leave any cables lying around.

Never use the device during thunderstorms, unplug the device immediately.

Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within

children’s reach, as they are potential sources of danger.

Do not insert objects into air vents.

Do not open the device and do not modify the device.

Do not connect this device to a dimmerpack.

Do not shake the device. Avoid brute force when installing or operating the device.

Do not switch the device on and off in short intervals, as this would reduce the system’s life.

Only use device indoor, avoid contact with water or other liquids.

Only operate the device after having familiarized with its functions.

Avoid flames and do not put close to flammable liquids or gases.

Always allow free air space of at least 50 cm around the unit for ventilation.

Always disconnect power from the mains, when device is not used or before cleaning! Only

handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

Make sure that no side forces can impact on the truss system.

The cable insert or the female part in the device must never be strained. There must always be

sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly

electrical shocks.

If the external cable is damaged, it has to be replaced by a qualified technician.

If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due

to cracks or deep scratches.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your device. Leave

the device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. The device must be installed out of the reach of children. Never leave the unit

running unattended.

For replacement use fuses of same type and rating only.

The user is responsible for correct positioning and operating of the Arc-Bar 3. The manufacturer will

not accept liability for damages caused by the misuse or incorrect installation of this device.

This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

The minimum distance between light-output and the illuminated surface must be more than 1.5 meter.

The maximum ambient temperature ta= 45°C must never be exceeded.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash

etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

CAUTION ! EYEDAMAGES !.

Avoid looking directly into the light source.

(meant especially for epileptics) !

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other

safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Procedure:

If the Arc-Bar is lowered from the ceiling or high joists, professional trussing systems have to be

used.

Use a clamp to mount the Arc-Bar, with the mounting-bracket, to the trussing system.

The Arc-Bar must never be fixed swinging freely in the room.

The installation must always be secured with a safety attachment, e.g. an appropriate safety net

or safety-cable.

When rigging, derigging or servicing the Arc-Bar, always make sure, that the area below the

installation place is blocked and staying in the area is forbidden.

The Arc-Bar 3 can be mounted in a hanging position (Fig. Above) or Upright (Fig. Below), using the

support frame. It is recommended to use at least 2 mounting points per fixture. Mounting the Arc-Bar with

a clamp or any other mounting bracket is recommended, depending on the requirements of your

application.

The Arc-Bar 3 can be placed on a flat stage floor or mounted to any kind of truss by a clamp.

Improper installation can cause serious damage to people and property !

Interlocking Multiple Fixtures

The figure below shows how multiple units can be interlocked together to create a 'panel' or 'blinder'

arrangement.

The 'male' and 'female' connections enable the fixtures to be interlocked together in the way shown in

the figure below.

Note: When multiple units are mounted together, it is not necessary to attach every single unit to the truss,

wall or weight supporting system. However, it is important to ensure that all fixtures are securely locked

together and that each fixture is individually secured using a safety cable.

Description of the device

Features

The Arc-Bar 3 is a LED system from Showtec.

• IP rating: IP-65

• Output/LED: 1W

• Total LEDs: 54 (18x Red, 18x Green, 18x Blue)

• 12-channel DMX-512 LED bank system

• Separate DMX channels for red, green, blue, cyan, magenta, yellow and white

• Blackout/static/dimmer/strobe

• Separate RGB control over each individual pod

• RGB color mixing with or without DMX controller

• Flip-down knobs for interlocking multiple units together, which can create blinder, wall and strip

light

effects (flush mounted)

• Automatic DMX-512 addressing (ADAS)

• LED display with lock-out feature

• Black anti-UV plastic cover

• Low power consumption

• Cooling: Direct air convection

• Beam Angle: 30 degrees

• Control: DMX-512 with 12 channels (with ID addressing)

•Effects: RGB Color mixing, Auto-programs, Strobe, Dimmer, Automatic DMX Addressing,

Intelligent ID addressing

NOTE: Knowledge of DMX is required to fully utilize this unit.

DMX Channel Summary

DMX Mode 1

Channel

Description

Red

Green

Blue

Yellow

Cyan

Purple

White

Strobe

Mode selection 245 <>255 : DMX Mode 2

ID Address selection

Module selection

Effect macro

DMX Mode 2

Channel

Description

Module #1

Module #2

Module #3

No Function

Strobe

Mode selection 000 <>244 : DMX Mode 1

ID Address selection

No Function

Overview

Fig. 1

1) 3x18 LEDS; Total 54 LEDs

2) Mountingbracket for Truss mounting

Backside

Fig. 2

3) Screws for connecting device side by side and/or on top of eachother

4) Adjustment Screw

5) DMX signal connector (IN)

6) DMX signal connector (OUT)

7) Power IN

8) Power OUT

9) LCD Display + Nenu Buttons (Set / Up / Down / Ext)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de DJ de Show Tec

Show Tec

Show Tec Galactic RGB300 Manual de usuario

Show Tec

Show Tec Flexstrip Set UV V1 Manual de usuario

Show Tec

Show Tec Galactic TXT Manual de usuario

Show Tec

Show Tec Juno Manual de usuario

Show Tec

Show Tec Data Flash Strobe Manual de usuario

Show Tec

Show Tec LED Par 64 36x3W Manual de usuario

Show Tec

Show Tec Energetic V3 Manual de usuario

Show Tec

Show Tec Atmos 2000 Manual de usuario

Show Tec

Show Tec Eventspot 1900 MKII Manual de usuario

Show Tec

Show Tec Edison Bar E6 Manual de usuario

Show Tec

Show Tec Derby LED V2 Manual de usuario

Show Tec

Show Tec Cameleon Bar 12-3 Manual de usuario

Show Tec

Show Tec Quick DMX Rack 1024 Manual de usuario

Show Tec

Show Tec Spectral Revo Tungsten V1 Manual de usuario

Show Tec

Show Tec GALACTIC BEAM G40 V1 Manual de usuario

Show Tec

Show Tec 60409 Manual de usuario

Show Tec

Show Tec Trackpod 30 Manual de usuario

Show Tec

Show Tec Showmaster 48 V5 Manual de usuario

Show Tec

Show Tec Sunstrip Active DMX Manual de usuario

Show Tec

Show Tec SPECTRAL M3000 ZOOM Q4 MK II Manual de usuario

Show Tec

Show Tec 41223 Manual de usuario

Show Tec

Show Tec 40392 Manual de usuario

Show Tec

Show Tec EventDOT 15 Q4 Manual de usuario

Show Tec

Show Tec Performer 1500 Fresnel Q6 Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario