Show Tec PHANTOM 300 LED MATRIX Manual de usuario

Phantom 300 LED Matrix V1

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: 40060

MANUAL

ENGLISH

Ordercode: 40060

Phantom 300 LED Matrix

Table of contents

Warning ...............................................................................................................................................................................3

Safety Instructions.........................................................................................................................................................3

Operating Determinations..........................................................................................................................................5

Rigging............................................................................................................................................................................5

Connection with the mains.........................................................................................................................................6

Return Procedure..........................................................................................................................................................7

Claims..............................................................................................................................................................................7

Description of the device.................................................................................................................................................8

Frontside..........................................................................................................................................................................8

Backside .........................................................................................................................................................................9

Installation...........................................................................................................................................................................9

Set Up and Operation.......................................................................................................................................................9

Control Modes.............................................................................................................................................................10

One Phantom (Built-in Programs and Manual)..................................................................................................10

One Phantom (Sound-controlled)........................................................................................................................10

Multiple Phantoms (Master/Slave Control).........................................................................................................10

Multiple Phantoms (DMX Control)........................................................................................................................11

Multiple Phantoms (ArtNet Control).....................................................................................................................12

Connecting to a Network ..............................................................................................................................................13

ArtNet settings .............................................................................................................................................................13

How to make a data cable......................................................................................................................................14

Software for controlling .............................................................................................................................................14

Fixture Linking...............................................................................................................................................................15

Data Cabling...............................................................................................................................................................15

Control Panel...............................................................................................................................................................16

DMX Control Mode.....................................................................................................................................................16

DMX Addressing..........................................................................................................................................................16

Menu Overview...........................................................................................................................................................17

Main Menu Options....................................................................................................................................................18

1. DMX-512 ................................................................................................................................................................18

2. ArtNet Settings......................................................................................................................................................19

2.1. IP Address...........................................................................................................................................................19

2.2. Subnet Mask......................................................................................................................................................20

2.3. Net.......................................................................................................................................................................20

2.4. Sub-Net...............................................................................................................................................................20

2.5. Universe ..............................................................................................................................................................21

3. Channel Mode.....................................................................................................................................................21

4. Run Mode..............................................................................................................................................................21

4.1. DMX Mode.........................................................................................................................................................22

4.2. ArtNet..................................................................................................................................................................22

4.3. Master Mode.....................................................................................................................................................22

4.4. Slave Mode........................................................................................................................................................22

4.5. Sound Mode......................................................................................................................................................22

4.6. Manual Mode ...................................................................................................................................................22

5. Functions ...............................................................................................................................................................23

5.1 Pan Invert............................................................................................................................................................23

5.2 Tilt Invert...............................................................................................................................................................23

5.3. Dimmer Curve...................................................................................................................................................24

5.4. DMX Fail..............................................................................................................................................................24

5.5. Display ................................................................................................................................................................24

5.6. Back Light...........................................................................................................................................................25

5.7. Reset ...................................................................................................................................................................25

5.8. Factory Sets .......................................................................................................................................................25

Ordercode: 40060

Phantom 300 LED Matrix

5.9. Auto Test.............................................................................................................................................................25

6. Version ...................................................................................................................................................................25

DMX Channels.............................................................................................................................................................26

12 Channels..............................................................................................................................................................26

20 Channels..............................................................................................................................................................28

120 Channels............................................................................................................................................................31

Maintenance....................................................................................................................................................................35

Replacing the Fuse.....................................................................................................................................................35

Troubleshooting ...............................................................................................................................................................35

No Light.........................................................................................................................................................................35

No Response to DMX..................................................................................................................................................36

Product Specifications....................................................................................................................................................37

Dimensions........................................................................................................................................................................38

Ordercode: 40060

Phantom 300 LED Matrix

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

•Showtec Phantom 300 LED Matrix

•2 mounting brackets with 4 quick-locks

•Pro Power connector to Schuko cable (1,5 m)

•User manual

LED Expected Lifespan

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration

of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular

optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is

significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower

operational temperatures. This may include climatic-environmental and the reduction of overall

projection intensity.

Safety Instructions

Every person involved with the installation, operation and maintenance of this device has to:

•be qualified

•follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

Ordercode: 40060

Phantom 300 LED Matrix

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the device.

•Never let the power cord come into contact with other cables! Handle the power cord and all

connections with the mains with particular caution!

•Never remove warning or informative labels from the unit.

•Never use anything to cover the ground contact.

•Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged.

•Never place any material over the lens.

•Never look directly into the light source.

•Never leave any cables lying around.

•Do not insert objects into air vents.

•Do not connect this device to a dimmerpack.

•Do not switch the device on and off in short intervals, as this would reduce the device’s life.

•Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at

least 5 minutes before handling.

•Do not shake the device. Avoid brute force when installing or operating the device.

•Only use device indoors, avoid contact with water or other liquids.

•Only operate the fixture after having checked that the housing is firmly closed and all screws are

tightly fastened.

•Only operate the device after having familiarized with its functions.

•Avoid flames and do not put close to flammable liquids or gases.

•Always keep case closed while operating.

•Always allow free air space of at least 50 cm around the unit for ventilation.

•Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power cord by the plug. Never pull out the plug by tugging the power cord.

•Make sure that the device is not exposed to extreme heat, moisture or dust.

•Make sure that the available voltage is not higher than stated on the rear panel.

•Make sure that the power cord is never crimped or damaged. Check the device and the power

cord from time to time.

•If the lens is obviously damaged, it has to be replaced, so that its functions are not impaired due to

cracks or deep scratches.

•If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

•If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the

device switched off until it has reached room temperature.

•If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

•For adult use only. Device must be installed out of the reach of children. Never leave the unit running

unattended.

•Never attempt to bypass the thermostatic switch or fuses.

•For replacement use fuses of same type and rating only.

•The user is responsible for correct positioning and operating of the Phantom 300 LED Matrix. The

manufacturer will not accept liability for damages caused by the misuse or incorrect installation of

this device.

•This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

•Repairs, servicing and electric connection must be carried out by a qualified technician.

•WARRANTY: Till one year after date of purchase.

Ordercode: 40060

Phantom 300 LED Matrix

Operating Determinations

•This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

•The minimum distance between light output and the illuminated surface must be more than 1 meter.

•The maximum ambient temperature ta = 40°C must never be exceeded.

•The relative humidity must not exceed 50 % with an ambient temperature of 40° C.

•If this device is operated in any other way, than the one described in this manual, the product may

suffer damages and the warranty becomes void.

•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.

You endanger your own safety and the safety of others!

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all

other safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Procedure:

•If the Phantom 300 LED Matrix is lowered from the ceiling or high joists, professional trussing systems

have to be used.

•Use a clamp to mount the Phantom 300 LED Matrix, with the mounting bracket, to the trussing

system.

•The Phantom 300 LED Matrix must never be fixed swinging freely in the room.

•The installation must always be secured with a safety attachment, e.g. an appropriate safety net or

safety cable.

•When rigging, derigging or servicing the projector, always make sure, that the area below the

installation place is blocked and staying in the area is forbidden.

Ordercode: 40060

Phantom 300 LED Matrix

The Phantom 300 LED Matrix can be placed on a flat stage floor or be mounted to any kind of truss by

means of a mounting bracket with quick-locks.

Improper installation can cause serious damage to people and property!

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

PHASE

BLUE

BLACK

SILVER

NEUTRAL

YELLOW/GREEN

GREEN

PROTECTIVE GROUND

Make sure that the device is always connected properly to the earth!

Improper installation can cause serious damage to people and property!

Ordercode: 40060

Phantom 300 LED Matrix

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

01) Your name.

02) Your address.

03) Your phone number.

04) A brief description of the symptoms.

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

Ordercode: 40060

Phantom 300 LED Matrix

Description of the device

Features

The Showtec Phantom 300 LED Matrix is a moving head with high output and great effects.

•Input voltage: 100-240V AC, 60/50Hz

•Power consumption: 340W

•Light source: 25 x 10W RGBW 4-in-1 LEDs

•Light output: 44950 lux @ 2 m

•DMX modes: 12, 20, 120 channels

•Beam angle: 15º

•Onboard: LCD display for easy setup

•Control mode: Auto, Manual, Sound-controlled, Master/Slave, DMX-512, ArtNet

•Continuous Pan/Tilt & Pan/Tilt inversion

•Dimmer: 0-100%

•Strobe: 0-20Hz

•Dimming curves: Linear, Square, I-Square, S-curve

•RGBW color mixing

•Pan: 0º -- 540º, Tilt: 0º -- 270º

•Pan/Tilt resolution: 16 bit

•Connections: Pro Power connector IN/OUT & 3-pin DMX IN/OUT

•Housing: flame-retardant plastic, die-cast aluminum

•Fuse: T5L/250V

•Dimensions: 230 x 395 x 480 mm (LxWxH)

•Weight: 13 kg

Frontside

Fig. 01

01) 25 x 10W RGBW 4-in-1 LEDs

02) Pan lock

03) LCD display

04) MENU control

Ordercode: 40060

Phantom 300 LED Matrix

Backside

Fig. 02

05) Cooling fans

06) Pro power connector 100-240V IN

07) Pro power connector 100-240V OUT

08) Power switch ON/OFF

09) Fuse T5L/250V

10) RJ45 Ethernet connector OUT

11) 3-pin DMX signal connector OUT

12) 3-pin DMX signal connector IN

13) RJ45 Ethernet connector IN

Installation

Remove all packing materials from the Phantom 300 LED Matrix. Check if all foam and plastic padding is

removed. Connect all cables.

Do not supply power before the whole system is set up and connected properly.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Tabla de contenidos

Otros manuales de Equipo de DJ e iluminación/Reproductor de CD para DJ de Show Tec

Show Tec

Show Tec Cameleon Flood 6 Q4 Manual de usuario

Show Tec

Show Tec helios 150 cob Manual de usuario

Show Tec

Show Tec 41141 Manual de usuario

Show Tec

Show Tec CLUB PAR 12-6 RGBWAUV Manual de usuario

Show Tec

Show Tec Par 64 100W COB UV Manual de usuario

Manuales populares de Equipo de DJ e iluminación/Reproductor de CD para DJ de otras marcas

Ikan

Ikan MB8-2PT-KIT Manual de usuario

Chauvet

Chauvet geyser P5 Manual de usuario

Chauvet

Chauvet OVATION E-260CW Manual de usuario

Chauvet

Chauvet ROGUE R1X Spot Manual de usuario

Beamz

Beamz LCB-48 Manual de usuario

TECshow

TECshow Ion 715Z Manual de usuario

Eagle

Eagle L310A/AW/AG Manual de usuario

Chauvet

Chauvet Rogue R2X Spot Manual de usuario

Philips

Philips VARI-LITE VL6000 Beam Luminaire Manual de usuario

ADJ

ADJ Saber spot WW Manual de usuario

Chauvet

Chauvet OVATION B-565FC Manual de usuario

TECshow

TECshow Ion 3715Z Manual de usuario

Chauvet

Chauvet OVATION MIN-E-10CW Manual de usuario

PR Lighting

PR Lighting JNR-8028R Manual de usuario

Ledj

Ledj 150W COB RGBA Par Manual de usuario

Ikan

Ikan MB8-3PT-KIT Manual de usuario

Ovation

Ovation E-260CW Manual de usuario

Elumen8

Elumen8 ELUM023 Manual de usuario