
Document Number: 0004566
Rev: 3 Page 10
Step 1 –Unlock the key fob
Lock mode is indicated by all 5 Mode Indicator lights
flashing when a button is pressed on the key fob. The
key fobs will automatically go into ‘lock mode’ after 3
minutes. In ‘lock mode’ the transmitter will not react
until it is unlocked. To unlock the key fob, hold both
the Up and Down buttons at the same time for 3
seconds. The mode indicator light will flash indicating
that the key fob is unlocked and will operate the
curtain. If no button is pressed for 3 minutes, the key
fob will automatically go into lock mode.
Step 2 –Select the correct key fob mode
The pairing instructions provided with the system pairs your curtain’s
remote with Mode 2 of the boat lift remote control. Change the remote to
Mode 2 by pressing the select button. Mode 2 is indicated by the second
from the left mode indicator light flashing.
Step 2 –Up and down functions
Press and hold the Up button to run the
curtain up. Press and hold the Down
button to run the curtain down.
Step 3 –Locking the key fob
The key fob will automatically go into lock mode
after 3 minutes or you can lock the key fob by
holding both the Up and Down buttons at the
same time for 3 seconds. The flashing mode
indicator light willturn off indicating the key fob is
in lock mode