SHL Telemedicine CCM Manual de usuario
CCM - Communication Center Module
User Manual
January -2012 REV 2.11
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
2
Note
The uick Guide provided to you with your CCM
shows the configuration for your CCM.
It is strongly recommend that you read this manual
carefully and in its entirety before using the CCM.
The CCM can communicate with the MC with LAN (internet) connection.
The measurement devices can communicate with the CCM in three different ways: serial
communication (using port 1 and port 2), USB or Bluetooth.
This user manual describes all the available communication for the CCM.
The quick guide provided to you with your CCM shows the communications available in your
package.
If you have any questions about how to use this device do not hesitate to call our
customer service for support:
1-800-221818
This telephone number appears at the bottom of each page.
Warning
•
••
• You can only use the CCM with devices
provided by SHL.
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
3
Table of Contents
1.
Indications for use
4
2.
Description of the CCM
5
3.
Communication Options
8
4.
Setting up the CCM
9
5.
Taking a measurement
11
6.
Handling Errors
12
7.
Troubleshooting
13
8.
Maintaining your CCM
14
9.
Equipment classification
15
10.
Operating and storage conditions
16
11.
Technical specifications
17
12.
Limited warranty
18
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
4
1. Indications for use
The CCM device is intended to receive and transmit measurements from one or more medical
devices to a remote location. The data from the medical device can be received via Bluetooth, a
Serial port or a USB port. The CCM device can transmit the data to the remote location via LAN.
Warning
The use of the device should always be in conjunction
with a receiver capable of receiving the data.
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
5
2. Description of the CCM
The Communication Center Module (CCM) is a stand-alone device that receives data
from measurement devices at a remote location (for example, the patient's home) and
transmits the data to the Medical Center (MC).
System diagram
Blood press
ure
Weight
Glucometer
Etc.
Bluetooth
Serial Port
USB
LAN
Device
To
CCM
To
MC
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
6
CCM diagram
CCM Components
Note: The CCM contains several LEDs (light-emitting diodes) that serve as indicator lamps.
Note: All the CCM sockets are labelled on to bottom side of the CCM.
1 Power Supply (PWR).
2 Speaker
3 LAN Socket (LAN).
4 Serial Ports (Port 1, port 2).
5 USB Port (USB).
6 Multifunction Button
7 Reset button
8 SHL Heart Logo
3
4
6
9
BOTTOM VIEW
TOP VIEW
FRONT VIEW
REAR VIEW
1
5
2
7
8
12
10
11
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
7
9 Telephone sockets (Line, Phone) – Not in use.
Three LEDs on top of the CCM.
10 Red indicates an error
11 Blue indicates a Bluetooth connection
12 Yellow indicates a cable connection (serial or USB), and shows if there are
untransmitted measurements.
Two LAN LEDs.
13 and 14 Green and Yellow indicates a LAN connection
15 Red LED not in use
13
14
15
mete
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
8
3. Communication Options
Caution
The User Manual describes all the ways a measurement device
can communicate with the CCM.
The User Manual also describes the way the CCM can
communicate with the MC.
Please refer to the communication options available at your
CCM as defined in the quick guide.
How does the CCM communicate with the MC?
The CCM can communicate with the MC in one way:
LAN Interface
:
Connects the CCM to the MC using your local area network (LAN) - (see
component 3 on the CCM diagram above).
This way is the fastest way to send the data
to the MC.
How does a measurement device communicate with the
CCM?
A measurement device can communicate with the CCM in one of three different ways:
Serial Port
:
This is a cable connection to the CCM. The CCM can communicate with two 2
devices at the same time (see component 4 on the CCM diagram above).
Bluetooth Wireless
:
This is wireless communication to the CCM. It can communicate
with up to 7 devices at the same time.
USB
:
This is also a cable connection to the CCM. It connects to a USB port on your CCM
(see component 5 on the CCM diagram above).
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
9
4. Setting up the CCM
Step 1: Power up the CCM
Connect the power cord plug into an electrical outlet (Figure 1) and the transformer cable
(Figure 2) into the back side of the CCM (Figure 3).
All the LED's on the CCM light up and stay lit for 2 seconds.
The orange SHL heart logo stays lit as long as the CCM is connected.
Step 2: CCM to MC Communication
LAN Interface:
This is a LAN connection to the MC. Connect one end of the LAN cable into
the LAN socket on the rear side of the CCM (Figure 4) and the other end (Figure 5) into the
home router (Figure 6)
. This way is the fastest way to send the data to the MC.
Figure 1 Figure 2 Figure 3
Figure 4 Figure 5 Figure 6
CCM - Communication Center Module
__________________________________________________________________________________________________
Customer service telephone number:
1-800-221818
10
Step : Measurement Device to CCM Communication
Serial Port:
This is a cable connection from your device to the CCM (Figure 10). Plug the
cable into one of the two ports according to the setup instructions in your uick Setup Guide.
Bluetooth Wireless:
The measurement data is automatically transmitted to your CCM.
No
action is needed.
USB Por
t
:
This is a cable connection from the measurement device to the CCM. Plug the
cable (Figure 11) into the USB port on the front side of the CCM (Figure 12).
Figure 11 Figure 12
Figure 10
Tabla de contenidos
Manuales populares de Sistema de conferencias de otras marcas
Kramer
Kramer VIA GO Manual de usuario
AVT
AVT MAGIC AC1 Go Manual de usuario
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manual de usuario
Sony
Sony PCS-I150 Manual de usuario
Middle Atlantic Products
Middle Atlantic Products VTC Series Manual de usuario
Prentke Romich Company
Prentke Romich Company Vanguard Plus Guía
